pizzacraft PC6011 User manual

USE: Assembly required. Review the instruction sheet for

assembly instructions. Tools required: #2 Phillips screwdriver,

10 mm wrench. A rubber mallet may also be helpful. Oven

must be completely cool and propane tank disconnected

before attaching leg kit.

Once leg kit has been assembled and installed, position on a

level surface before using. Your oven may still be easily

transported by removing the hood and stones for travel. Oven

must be completely cool and propane tank disconnected

before moving.

CARE: Use a damp cloth to wipe down legs and base as

needed. Do not store outside unprotected.

HD Item # PC6011

TCG Item # PC6011

Description: Pizza Oven Leg Kit

INSTRUCTIONS