iLive ITWFV678 v2096-01 User manual

Category
Supplementary music equipment
Type
User manual

This manual is also suitable for

User’s Guide for Model ITWFV678 v2096-01
2
BATTERY WARNINGS
WARNING: Do not ingest battery,
Chemical Burn Hazard.
If the remote control supplied with this
product contains a coin/button cell
battery and the coin/button cell battery is
swallowed, it can cause severe internal
burns in just 2 hours and can lead to
death.
Keep new and used batteries away from
children. If the battery compartment does
not close securely, stop using the product
and keep it away from children.
If you think batteries might have been
swallowed or placed inside any part of the
body, seek immediate medical attention.
CAUTION: Danger of explosion if battery is
incorrectly replaced. Replace only with the
same or equivalent type.
WARNING: There is a danger of explosion
if you attempt to charge standard Alkaline
batteries in the unit. Only use rechargeable
NiMH batteries.
Battery shall not be exposed to excessive
heat such as sunshine, re, or the like.
Do not mix old and new batteries.
Completely replace all old batteries with
new ones.
Do not mix alkaline, standard (carbon-
zinc), or rechargeable (ni-cad, ni-mh, etc)
batteries.
Batteries should be recycled or disposed
of as per state and local guidelines.
IMPORTANT SAFETY
INSTRUCTIONS
Read these Instructions.
Keep these Instructions.
Heed all Warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any ventilation openings.
Install in accordance with the
manufacturer’s instructions.
Do not install near any heat sources such
as radiators, heat registers, stoves, or
other apparatus (including ampliers) that
produce heat.
Do not defeat the safety purpose of the
polarized or grounding - type plug. A
polarized plug has two blades with one
wider than the other. A grounding type
plug has two blades and a third grounding
prong. The wide blade or the third prong
are provided for your safety. When the
provided plug does not t into your outlet,
consult an electrician for replacement of
the obsolete outlet.
Protect the power cord from being walked
on or pinched particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.
Only use attachments/accessories
specied by the manufacturer.
Unplug this apparatus during lightning
storms or when unused for long periods
of time.
Refer all servicing to qualied service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, does not operate normally, or
has been dropped.
Use only with a cart, stand, tripod,
bracket, or table specied by the
manufacturer, or sold with
the apparatus. When a
cart is used, use caution
when moving the cart/
apparatus combination to
avoid injury from tip-over.
3
SAFETY WARNINGS
WARNING: To prevent re or shock
hazards, do not expose this unit to rain
or moisture.
Clean only with a dry cloth. Do not clean
with liquid cleaners or damp cloth.
Do not use with devices that should not be
used unsupervised.
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, USE ONLY INDOORS.
Do not use in a bathroom or other location
where it may come into contact with water
or splashing.
WARNING: Where the mains plug
or appliance coupler is used as the
disconnect device, such disconnect
device shall remain readily operable.
Risk of electric shock. Grounding
continuity must be maintained.
Only use with the included power supply
or a UL/ETL certied power supply of the
same specications.
FCC WARNINGS
WARNING: To assure continued operation,
follow the attached installation instructions and
use only shield cables when connecting to
other devices. Changes or modications not
expressly approved by the party responsible for
compliance could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested
and found to comply with the limits for a
Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed
to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses, and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is
no guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by
one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the
equipment and receiver.
Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced
radio/TV technician for help.
WARNING: This product can
expose you to chemicals including
lead, which is known to the State of
California to cause cancer and birth
defects or other reproductive harm.
For more information go to: www.
P65Warnings.ca.gov This product
meets and complies with all Federal
regulations.
4
TABLE OF CONTENTS
Introduction
Features – 5
Includes – 5
Overview
Speaker Controls & Inputs – 6
Control Functions – 7
Connection/Alexa Indicator
Light – 7
Overview
Remote Control – 8
Wall Mount Bracket Installation – 9
Setup
1. Power – 10
2. Alexa App – 11
3. iLive Wi-Fi App – 11
4. Connect to Wi-Fi – 12
5. Link Your Amazon Account – 15
6. Things to Try with Alexa – 17
iLive Wi-Fi App
Music Player Screen – 18
Menu Screen – 19
Device List Screen – 20
Multi-room Play – 21
Multi-channel Play with Multiple
Speakers – 21
Internet Music Services – 22
Spotify Connect
Listen Out Loud with Spotify
Connect – 23
Other Ways to Play
Connecting HDMI – 24
Optical Input – 24
Aux In (Stereo RCA Inputs) – 24
Line In – 26
Troubleshooting
Troubleshooting Guide – 27
Customer Support
Contact Information – 28
International Support – 28
Warranty Information – 28
5
INTRODUCTION
Specications, software updates, and third party content are subject to change without prior notice.
Make your home smarter with the Wireless 2.1 Sound Bar with Amazon Alexa. Link
Amazon Alexa with the speaker and ask Alexa to play music, read the news, check
weather, control your smart home and more. Pair up to 6 speakers together on
Wi-Fi for whole home audio or connect it to your TV for seamless integration with
your entertainment center.
Features
» Voice-activated Amazon Alexa cloud-based voice service
» Multi-room and multi-user capable
» Free iLive Wi-Fi app download
» Built-in Wi-Fi
» 2 Built-in microphones for far-eld voice recognition
» 37” length
» HDMI Input (ARC supported)
» Optical Audio Input
» RCA Stereo Audio Input (Aux In)
» 3.5mm Audio Input (Line In)
» Remote with pre-installed CR 2025 battery
Includes
» AC/DC power adapter
» RCA Stereo Audio cable
» Wall Mounting hardware and instructions
» User’s guide
» Warranty
6
Speaker Controls & Inputs
OVERVIEW
Power Standby
Red Light
Wi-Fi
White Light
Optical
Orange Light
HDMI
Yellow Light
Aux/Line In
Green Light
IR Remote Sensor
Connection/Alexa Indicator Light
Front
Top
Rear
Mode Indicator Lights
7
Control Functions
Connection/Alexa Indicator Light
» Alexa Indicators
No Light - Amazon Alexa standing by
Alternating Light & Dark Blue - Amazon Alexa listening/responding
Red - Amazon Alexa and microphones muted
» Connection Indicators
Flashing White (fast) - Connecting to Wi-Fi
No Light - Wi-Fi Standby Mode (Mode Indicator Light will display white for Wi-Fi)
» Press and hold to power the speaker ON or OFF.
Press to switch between Wi-Fi and Aux modes.
» In Wi-Fi Mode (white Mode LED), press and hold to begin
connecting to a Wi-Fi network.
Short press to play or pause audio playing in the iLive app.
» Press to activate Amazon Alexa and say a command. You
can also just say, “Alexa..”, within range of the speaker’s
microphones.
» Press to mute the microphones and disable Amazon Alexa.
Press and hold for 10 seconds to reset the speaker.
» Press to adjust the volume up or down. You can also ask
Alexa to set the volume level by saying, “Alexa, set volume
to...”
8
Remote Control
OVERVIEW
Power
Press to power ON/OFF.
Mute
Press to mute audio.
WiFi
Press to select Wi-Fi Mode.
Optical
Press to select Optical Audio
Mode.
HDMI
Press to select HDMI Mode.
Aux
Press to select Aux In Mode.
Line In
Press to select Line In Mode.
Music/Movie/Dialog
Press to select equalizer prole.
Skip Back/Fwd
Press to skip the selected track.
Play/Pause
Press to play or pause the
selected track
Volume −/+
Battery CompartmentBattery Replacement Diagram
9
Wall Mount Bracket Installation
Step 1
Find the mounting bracket holes on the
rear of the sound bar, 4 per side.
Step 2
Using a
screwdriver,
attach the
mounting
brackets to the
sound bar.
Installation Complete
10
1. Power
Use an AC/DC Power adapter (included) to connect to a standard wall outlet.
SETUP
DC Power port on the rear of the sound bar
11
2. Alexa App
Download the Amazon Alexa app to your device by scanning the appropriate QR
code below or search for the Amazon Alexa app in the Google Play™ Store, or
Apple App Store
®
.
The Amazon Alexa app connects your sound bar to Alexa’s voice services. It’s
also where you can see an overview of your requests and manage your contacts,
lists, news, music, and settings.
Once downloaded, open the Alexa app and log into your Amazon account. If you
do not already have an Amazon account, choose “Create a new Amazon account
and enter the requested info. Once logged in, the app will prompt you for setup.
You cannot use Alexa Voice Services if you aren’t logged into an Amazon
account. The speaker must be in Wi-Fi Mode/Cloud Play to use Alexa
Voice Services.
3. iLive Wi-Fi App
Download the iLive app to your device by scanning the QR codes below or search
for the iLive Wi-Fi app in the Google Play™ Store, or Apple App Store
®
.
The iLive Wi-Fi app lets you play music and audio from streaming services like
Spotify, iHeartRadio and others. It also controls the speaker’s other functions,
such as Multi-room play, Multi-channel play, etc.
Note: This app is designed for mobile devices only, such as
smartphones or Wi-Fi enabled tablets. It is not available for use on
regular desktop or laptop computers.
AppleAndroid
AppleAndroid
12
4. Connect to Wi-Fi
To use the sound bar’s Wi-Fi features, the sound bar and your mobile device
must both be connected to a Wi-Fi network. The app will guide you through the
process, follow the on-screen instructions and have your network password ready.
After the initial connection, the speaker will remember the Wi-Fi network and
automatically connect to it when it is in Wi-Fi Mode. If the speaker should become
disconnected or will not connect normally, repeat the steps below.
Initial Wi-Fi Connection
Note: If you have a dual band wireless router, be sure to connect to the 2.4GHz
band, not the 5GHz band.
1. Press and hold the Power button to power on the sound bar. A voice will
announce, “Power On, Wi-Fi Mode”. Following this, you’ll hear a chime and the
voice will announce, “Entering Setup Mode”. It may take the speaker a minute or
two to run through this process, please be patient.
2. The speaker is now ready for setup. Open the iLive Wi-Fi app on your device
and press “Search”, then “Add Device” (Image A, B, below).
SETUP
A. B.
13
3. From the drop down menu, select the ITWFV678 speaker, then press “Connect
Speaker” (Image C, below).
4. The app will direct you to your mobile device’s Wi-Fi Settings Menu to connect
directly to the speaker. Press “Settings” (Image D, below) to go to your mobile
device’s Wi-Fi settings menu, then select ITWFV678_XXXX and return to the app
when you are connected.
C. D.
Setup instructions continued on the next page.
14
SETUP
E. F.
4. Connect to Wi-Fi
Initial Wi-Fi Connection (continued)
5. Once you have returned to the app, select your Wi-Fi network/router and enter
the password, then press “Continue”. This will connect your mobile device and
the speaker to your Wi-Fi (Image E, below).
6. The app will display its progress as it congures the speaker and your Wi-Fi
network. When this is complete, a voice will announce the successful connection
and the Connection LED will turn off. Press “Next” to proceed to Amazon
Alexa Setup (Image F, below).
15
G. H.
5. Link Your Amazon Account
1. When the Wi-Fi connection is complete, the app will prompt you to link the
speaker with the Amazon Alexa app on your device (Image G, below). If you do
not have the Amazon Alexa app on your device, refer to the instructions
on pg. 11. NOTE: If you do not want to login to your Amazon account and link
Alexa to the speaker at this time, press “Cancel”. You can complete it later by
following the steps on the next page.
2. Enter your Amazon account information to complete setup and begin using
Amazon Alexa with your speaker (Image H, below).
16
SETUP
5. Link Your Amazon Account
Amazon Alexa Manual Setup
1. From the Music Player Screen, swipe right to access the Menu Screen (Image I,
below).
2. Select Amazon Alexa from the list (Image J, below).
3. Sign into your Amazon account when prompted.
Swipe right
for Menu
Screen
I. J.
17
6. Things to Try with Alexa
Note: Amazon Alexa Voice Services are only accessible when the sound
bar is in Wi-Fi Mode, also known as Cloud Play. The Mode Indicator Light
will shine white when it is in Wi-Fi Mode.
Now that you’re connected, try interacting with Alexa. Start by saying “Alexa,
followed by a command or question. Here are some examples:
» “Alexa, tell me a joke.”
» “Alexa, what’s in the news?”
» “Alexa, what can you do?”
While the speaker is on (in Wi-Fi mode) and the Connection LED is white, Alexa is
in standby mode, awaiting a command or question from you. All you need to do
is say “Alexa..., within range of the speaker’s microphones and she will respond.
When Alexa is listening and responding to your commands, the Connection LED
on the speaker will change from white to blue. You can also press the
button on
the speaker to manually activate Alexa.
You can mute Alexa and disable the microphones by pressing the
button. The
Connection LED will change to red while muted. In this mode, the speaker’s audio
functions will still work normally.
Setting Time Zone & Location
To get the most accurate information from Alexa for things like weather, movie
times, etc. you need to make sure your current location is correct. Alexa should
automatically sync to your location and time zone, however, if you encounter
problems, you can manually adjust your location/time zone from the Alexa App
» Open the Alexa App and press the
Menu icon on the Home page, then select
Alexa Devices > ITWFV678 > Device Location.
18
Music Player Screen
ILIVE WI-FI APP
Swipe right
for Device
Menu
Swipe right for
Menu Screen
1. Music Directory
2. Connection Mode
3. Repeat/Shufe
4. Volume
5. Play Controls
5
3
2
4
1
19
Menu Screen
1. Search
Search for songs, albums and artists.
2. Favorites
Open songs, artists, albums, or
stations that you have saved.
3. My Music
Open music that is stored on your
mobile device.
4. Internet Music Services
Available third-party music apps.
5. Cloud Play (Wi-Fi)
Press to enable Wi-Fi Mode
(MUST BE ON TO USE ALEXA).
6. Audio Inputs
Select different audio input sources.
1
3
2
4
6
5
20
Device List Screen
1
3
2
1. Add Device
Add more speakers to the list of
available devices.
2. Speaker Settings
Rename a speaker, set preset
stations, and nd additional
information on a speaker.
3. Audio Channel
Press to set audio channels for the
speaker: L / R / LR (left/right/stereo).
4. Play All
Play music on all connected
speakers.
4
ILIVE WI-FI APP
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28

iLive ITWFV678 v2096-01 User manual

Category
Supplementary music equipment
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI