Aaeon ETX-A55E User manual

  • Hello! I am an AI chatbot trained to assist you with the Aaeon ETX-A55E User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
ETX CPU Module ETX- A55E
ETX-A55E
AMD G-Series Processors
DDR3L Memory
SATA x 2, PATA x 2, PCI x 4
USB 2.0 x 4, COM x 2, 8/16-bit ISA
CRT, HD Audio, I2C
18/24-bit Dual-Channel LVDS
ETX-A55E Rev. A Manual 1
st
Ed.
July 28, 2015
ETX CPU Module ETX- A55E
Copyright Notice
This document is copyrighted, 2015. All rights are reserved. The
original manufacturer reserves the right to make improvements to the
products described in this manual at any time without notice.
No part of this manual may be reproduced, copied, translated, or
transmitted in any form or by any means without the prior written
permission of the original manufacturer. Information provided in this
manual is intended to be accurate and reliable. However, the original
manufacturer assumes no responsibility for its use, or for any in-
fringements upon the rights of third parties that may result from its
use.
The material in this document is for product information only and is
subject to change without notice. While reasonable efforts have been
made in the preparation of this document to assure its accuracy,
AAEON assumes no liabilities resulting from errors or omissions in
this document, or from the use of the information contained herein.
AAEON reserves the right to make changes in the product design
without notice to its users.
i
ETX CPU Module ETX- A55E
Acknowledgments
All other products’ name or trademarks are properties of their
respective owners.
AMD is trademark of Advanced Micro Devices.
Microsoft Windows
®
is a registered trademark of Microsoft Corp.
ITE is a trademark of Integrated Technology Express, Inc.
IBM, PC/AT, PS/2, and VGA are trademarks of International
Business Machines Corporation.
All other product names or trademarks are properties of their
respective owners.
ii
ETX CPU Module ETX- A55E
Packing List
Before you begin installing your card, please make sure that the
following materials have been shipped:
DVD-ROM for manual (in PDF format) and drivers
ETX-A55E Module
If any of these items are missing or damaged, please contact your
distributor or sales representative immediately.
iii
ETX CPU Module ETX- A55E
China RoHS Requirements
产品中有毒有害物质或元素名称及含量
AAEON Main Board/ Daughter Board/ Backplane
部件名称
有毒有害物质或元
(Pb)
(Hg)
(Cd)
六价铬
(Cr(VI))
多溴联苯
(PBB)
多溴二苯醚
(PBDE)
印刷电路板
及其电子组件
×
外部信号
连接器及线材
×
SJ/T 11363-2006
X
SJ/T 11363-2006
iv
ETX CPU Module ETX- A55E
China RoHS Requirements
Poisonous or Hazardous Substances or Elements in Products
AAEON Main Board/ Daughter Board/ Backplane
Component
Poisonous or Hazardous Substances or Elements
Lead
(Pb)
Mercury
(Hg)
Cadmium
(Cd)
Hexavalent
Chromium
(Cr(VI))
Polybrominated
Biphenyls
(PBB)
Polybrominated
Diphenyl Ethers
(PBDE)
PCB & Other
Components
X O O O O O
Wires &
Connectors
for External
Connections
X O O O O O
O
The quantity of poisonous or hazardous substances or elements found in each of the
component's parts is below the SJ/T 11363-2006-stipulated requirement.
X: T
he quantity of poisonous or hazardous substances or elements found in at least one
of the component's parts is beyond the SJ/T 11363-2006-stipulated requirement.
Note: The Environment Friendly Use Period as labeled on this product is
applicable under normal usage only
v
ETX CPU Module ETX- A55E
Contents
Chapter 1 General Information
1.1 Introduction ....................................................................1-2
1.2 Features ........................................................................1-3
1.3 Specifications ................................................................1-4
Chapter 2 Quick Installation Guide
2.1 Safety Precautions ........................................................2-2
2.2 Mechanical Drawing ......................................................2-3
2.3 Block Diagram ...............................................................2-5
2.4 List of Connectors .........................................................2-6
2.4.1 RTC Battery Connector (CN1) .............................2-7
2.4.2 SPI ROM Flash Connector (CN2) .......................2-7
2.4.3 Fan Connector (CN4) ..........................................2-8
2.4.4 SATA Connector (CN5) .......................................2-8
2.4.5 SATA Connector (CN6) .......................................2-9
2.4.6 LCP Debug Port Connector (CN7) ....................2-10
2.4.7 ETX X1 Connector (X1A)................................2-11
2.4.8 ETX X2 Connector (X1B)................................2-11
2.4.9 ETX X3 Connector (X1C) ...............................2-15
2.4.10 ETX X4 Connector (X1D) .............................2-17
2.4.11 DDR3L SODIMM Connector (DIMM1) ...........2-19
2.5 List of Switches ..........................................................2-19
2.5.1 ATX/AT Mode & Clear CMOS Switch ..............2-21
vi
ETX CPU Module ETX- A55E
Chapter 3 AMI BIOS Setup
3.1 System Test and Initialization. ......................................3-2
3.2 AMI BIOS Setup ............................................................3-3
Chapter 4 Driver Installation
4.1 Installation .....................................................................4-3
Appendix A Programming The Watchdog Timer
A.1 Programming ............................................................... A-2
A.2 W83627DHG Watchdog Timer Initial Program ............ A-8
Appendix B I/O Information
B.1 I/O Address Map ....................................................... B-2
B.2 Memory Address Map ............................................... B-4
B.3 IRQ Mapping Chart ................................................... B-5
B.4 DMA Channel Assignment ........................................ B-6
Appendix C AHCI Settings
C.1 Setting AHCI ............................................................. C-2
vii
ETX CPU Module ETX- A55E
General
Information
Chapter
1
Chapter 1 General Information 1- 1
ETX CPU Module ETX- A55E
1.1 Introduction
This Users Manual contains all the essential information, such as
detailed descriptions and explanations on the products hardware
and software features (if any), its specifications, dimensions,
jumper/connector settings/definitions, and driver installation
instructions (if any), to facilitate users in setting up their product.
Users may refer to the AAEON.com for the latest version of this
document.
Chapter 1 General Information 1- 2
ETX CPU Module ETX- A55E
1.2 Features
AMD G-Series T-16R/T56N Processor
A55E Chipset
204-pin DDR3L 1066/1333 SODIMM Memory (up to 8 GB for
Windows
®
7 64-bit)
10/100 Ethernet x 1
CRT, 18/24-bit Dual-Channel LVDS
SATA x 2, PATA x 2, PCI x 4, SMBus x 5, PCI x 4, I2C
8/16-bit ISA
USB 2.0 x 4, COM x 2
Chapter 1 General Information 1- 3
ETX CPU Module ETX- A55E
1.3 Specifications
System
Form Factor
ETX
Processor
System Memory
Chipset
AMD G-Series T16R Single-core 615 MHz
AMD G-Series T56N Dual-core 1.65 GHz
204-pin DDR3L 1066/1333 MHz SODIMM
up to 8 GB
AMD A55E
Ethernet
Realtek
®
for 10/100 Base-TX
BIOS
AMI UEFI BIOS
Wake On LAN
Yes
Watchdog Timer
Super I/O
H/W Status Monitoring
Super I/O
Expansion Interface 32-bit PCI x 4
SMBus x 1
I2C x 1
8/16-bit ISA
Power Requirement
DC 5V
Power Consumption (Typical) 10.7 W (T16R)
Chapter 1 General Information 1- 4
ETX CPU Module ETX- A55E
24.2 W (T56N)
Board Size ETX, 114 x 95mm (4.5" x 3.74")
Gross Weight
0.2 kg (1.4 lb)
Operating Temperature
0 °C ~ 60 °C (32 °F ~ 140 °F)
Storage Temperature
-20°C ~ 70°C (-4°F ~ 158°F)
Operation Humidity
10 ~ 80% Relative Humidity,
Non-Condensing
Display
Chipset
AMD G-Series Integrated Graphics Engine
Memory
Shared Memory: 256 MB/ UMA
Resolution
CRT up to 1920 x 1200
LVDS up to 1920 x 1200
LCD Interface
18/24-bit Dual-Channel LVDS
I/O
Storage
PATA x 2 (supports 2 devices)
SATA 6.0 Gb/s x 2
USB
USB 2.0 x 4
Serial Port
RS-232 x 2
DI/O -
Chapter 1 General Information 1- 5
ETX CPU Module ETX- A55E
PS/2 Port PS/2 Keyboard x 1
Mouse x 1
Audio HD Audio x 1
Chapter 1 General Information 1- 6
ETX CPU Module
E T X - A 5 5 E
Chapter 2 Quick Installation Guide 2-1
Quick
Installation
Guide
Chapter
2
ETX CPU Module
E T X - A 5 5 E
Chapter 2 Quick Installation Guide 2-2
2.1 Safety Precautions
Always completely disconnect the power cord
from your board whenever you are working on
it. Do not make connections while the power is
on, because a sudden rush of power can
damage sensitive electronic components.
Always ground yourself to remove any static
charge before touching the board. Modern
electronic devices are very sensitive to static
electric charges. Use a grounding wrist strap at
all times. Place all electronic components on a
static-dissipative surface or in a static-shielded
bag when they are not in the chassis
ETX CPU Module
E T X - A 5 5 E
Chapter 2 Quick Installation Guide 2-3
2.2 Mechanical Drawing
Component Side
Component Side
Solder Side
ETX CPU Module
E T X - A 5 5 E
Chapter 2 Quick Installation Guide 2-4
Solder Side
Component Side
Solder Side
ETX CPU Module
E T X - A 5 5 E
Chapter 2 Quick Installation Guide 2-5
2.3 Block Diagram
ETX CPU Module
E T X - A 5 5 E
Chapter 2 Quick Installation Guide 2-6
2.4 List of Connectors
The board has a number of connectors that allow you to configure your
system to suit your application.
The table below shows the function of each of the board's jumpers:
Label
Function
CN1
RTC Battery Connector
CN2
BIOS SPI Rom Flash Connector
CN4
FAN Connector
CN5
SATA Connector
CN6
SATA Connector
CN7
LPC Debug Port Connector
X1A
ETX - X1 Connector
X1B
ETX - X2 Connector
X1C
ETX - X3 Connector
X1D
ETX - X4 Connector
DIMM1
DDR3 SODIMM connector
/