Desa Tech C50B Owner's manual

Type
Owner's manual

Desa Tech C50B is a 50,000 BTU kerosene-powered forced-air heater designed for use in well-ventilated areas that are free of flammable vapors or high dust content. It features an electric ignition system, a flame-out control system, and an adjustable thermostat (if used) for maintaining a desired temperature. The heater has a 4-gallon fuel tank and a fuel consumption rate of approximately 0.37 gallons per hour. It requires a 120V, 60Hz electrical outlet and has a 2.90 amp draw during normal operation. The heated air output is 106 CFM, and the air pump pressure is 3.60.

Desa Tech C50B is a 50,000 BTU kerosene-powered forced-air heater designed for use in well-ventilated areas that are free of flammable vapors or high dust content. It features an electric ignition system, a flame-out control system, and an adjustable thermostat (if used) for maintaining a desired temperature. The heater has a 4-gallon fuel tank and a fuel consumption rate of approximately 0.37 gallons per hour. It requires a 120V, 60Hz electrical outlet and has a 2.90 amp draw during normal operation. The heated air output is 106 CFM, and the air pump pressure is 3.60.

  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19

Desa Tech C50B Owner's manual

Type
Owner's manual

Desa Tech C50B is a 50,000 BTU kerosene-powered forced-air heater designed for use in well-ventilated areas that are free of flammable vapors or high dust content. It features an electric ignition system, a flame-out control system, and an adjustable thermostat (if used) for maintaining a desired temperature. The heater has a 4-gallon fuel tank and a fuel consumption rate of approximately 0.37 gallons per hour. It requires a 120V, 60Hz electrical outlet and has a 2.90 amp draw during normal operation. The heated air output is 106 CFM, and the air pump pressure is 3.60.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI