Owner's Manual
201b
206j
* Windows® is known officially as: “Microsoft® Windows® operating system.”
207
* Apple and Macintosh are registered trademarks of Apple Computer, Inc.
209
* Mac OS is a trademark of Apple Computer, Inc.
220
* All product names mentioned in this document are trademarks or registered trademarks of their
respective owners.
237
* V-LINK ( ) is a trademark of Roland Corporation.
202
Copyright © 2005 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any form without
the written permission of ROLAND CORPORATION.
Before using this unit, carefully read the sections entitled:“USING THE UNIT SAFELY” (p. 4), and
“IMPORTANT NOTES” (p. 6). These sections provide important information concerning the proper
operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of
every feature provided by your new unit, Owner’s manual should be read in its entirety. The manual
should be saved and kept on hand as a convenient reference.
03672723 ’05-1-3KS
Owner’s Manual
To resize thickness, move all items on the front cover
and center registration marks to left or right
2
To resize thickness, move all items on the front cover
and center registration marks to left or right.
Information
When you need repair service, call your nearest EDIROL/Roland Service Center or authorized EDIROL/Roland distributor
in your country as shown below.
As of August 20, 2004 (EDIROL-2)
ASIA
TAIWAN
ROLAND TAIWAN
ENTERPRISE CO., LTD.
Room 5, 9fl. No. 112 Chung Shan
N.Road Sec.2, Taipei, TAIWAN,
R.O.C.
TEL: (02) 2561 3339
CHINA
Roland Shanghai Electronics Co.,Ltd.
5F. No.1500 Pingliang Road
Shanghai 200090, CHINA
TEL: (021) 5580-0800
Roland Shanghai Electronics Co.,Ltd.
(BEIJING OFFICE)
10F. No.18 Anhuaxili
Chaoyang District, Beijing 100011
CHINA
TEL: (010) 6426-5050
Roland Shanghai Electronics Co.,Ltd.
(GUANGZHOU OFFICE)
2/F., No.30 Si You Nan Er Jie Yi
Xiang, Wu Yang Xin Cheng,
Guangzhou 510600, CHINA
TEL: (020) 8736-0428
AUSTRALIA
Roland Corporation
Australia Pty., Ltd.
38 Campbell Avenue
Dee Why West. NSW 2099
AUSTRALIA
TEL: (02) 9982 8266
CENTRAL/LATIN
AMERICA
CZECH REP.
K-AUDIO
Kardasovska 626.
CZ-198 00 Praha 9,
CZECH REP.
TEL: (2) 666 10529
DENMARK
Roland Scandinavia A/S
Nordhavnsvej 7, Postbox 880,
DK-2100 Copenhagen
DENMARK
TEL: 3916 6200
FINLAND
Roland Scandinavia As,
Filial Finland
Elannontie 5
FIN-01510 Vantaa, FINLAND
TEL: (0)9 68 24 020
GERMANY
Roland Elektronische
Musikinstrumente HmbH.
Oststrasse 96, 22844 Norderstedt,
GERMANY
TEL: (040) 52 60090
GREECE
STOLLAS S.A.
Music Sound Light
155, New National Road
Patras 26442, GREECE
TEL: 2610 435400
HUNGARY
Roland East Europe Ltd.
Warehouse Area ‘DEPO’ Pf.83
H-2046 Torokbalint, HUNGARY
TEL: (23) 511011
BRAZIL
Roland Brasil Ltda
Rua San Jose, 780 Sala B
Parque Industrial San Jose
Cotia - Sao Paulo - SP, BRAZIL
TEL: (011) 4615 5666
OTHERS incl. MEXICO
Roland Audio Development
Corp.
14830 Desman Rd.
La Mirada, CA 90638
U.S.A.
Tel: 1-714-521-8000
email : [email protected]
AUSTRIA
Roland Elektronische
Musikinstrumente HmbH.
Austrian Office
Eduard-Bodem-Gasse 8,
A-6020 Innsbruck, AUSTRIA
TEL: (0512) 26 44 260
BELGIUM/FRANCE/
HOLLAND/
LUXEMBOURG
Roland Central Europe N.V.
Houtstraat 3, B-2260, Oevel
(Westerlo) BELGIUM
TEL: (014) 575811
EUROPE
IRELAND
Roland Ireland
G2 Calmount Park, Calmount
Avenue, Dublin 12
Republic of IRELAND
TEL: (01) 4294444
ITALY
Roland Italy S. p. A.
Viale delle Industrie 8,
20020 Arese, Milano, ITALY
TEL: (02) 937-78300
NORWAY
Roland Scandinavia Avd.
Kontor Norge
Lilleakerveien 2 Postboks 95
Lilleaker N-0216 Oslo
NORWAY
TEL: 2273 0074
POLAND
MX MUSIC SP.Z.O.O.
UL. Gibraltarska 4.
PL-03664 Warszawa POLAND
TEL: (022) 679 44 19
PORTUGAL
Roland Iberia, S.L.
Portugal Office
Cais das Pedras, 8/9-1 Dto
4050-465, Porto, PORTUGAL
TEL: 22 608 00 60
ROMANIA
FBS LINES
Piata Libertatii 1,
535500 Gheorgheni, ROMANIA
TEL: (266) 364 609
RUSSIA
MuTek
3-Bogatyrskaya Str. 1.k.l
107 564 Moscow, RUSSIA
TEL: (095) 169 5043
SPAIN
Roland Iberia, S.L.
Paseo García Faria, 33-35
08005 Barcelona SPAIN
TEL: 93 308 10 00
SWEDEN
Roland Scandinavia A/S
SWEDISH SALES OFFICE
Danvik Center 28, 2 tr.
S-131 30 Nacka SWEDEN
TEL: (0)8 702 00 20
SWITZERLAND
Roland (Switzerland) AG
Landstrasse 5, Postfach,
CH-4452 Itingen,
SWITZERLAND
TEL: (061) 927-8383
UKRAINE
TIC-TAC
Mira Str. 19/108
P.O. Box 180
295400 Munkachevo, UKRAINE
TEL: (03131) 414-40
UNITED KINGDOM
Roland (U.K.) Ltd.
Atlantic Close, Swansea
Enterprise Park, SWANSEA
SA7 9FJ,
UNITED KINGDOM
TEL: (01792) 702701
U. S. A. / CANADA
EDIROL Corporation
North America
425 Sequoia Drive, Suite 114
Bellingham, WA 98226
U. S. A.
TEL: (360) 594-4273
FAX: (360) 594-4271
http://www.edirol.com/
EUROPE
EDIROL (Europe) Ltd.
Studio 3.4 114 Power Road
London W4 5PY
U. K.
TEL: +44 (0)20 8747 5949
FAX:+44 (0)20 8747 5948
http://www.edirol.com/europe
Deutschland
TEL: 0700 33 47 65 20
France
TEL: 0810 000 371
Italia
TEL: 02 93778329
AUSTRALIA
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
ATTENTION: RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the product.
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS.
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
WARNING - When using electric products, basic precautions should always be followed, including the following:
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any of the ventilation openings. Install in
accordance with the manufacturers instructions.
8. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. When the provided
plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
WARNING:
IMPORTANT:
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying
the terminals in your plug, proceed as follows:
The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the plug which is marked by the
letter E or by the safety earth symbol or coloured GREEN or GREEN-AND-YELLOW.
The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED.
THIS APPARATUS MUST BE EARTHED
THE WIRES IN THIS MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE.
GREEN-AND-YELLOW: EARTH, BLUE: NEUTRAL, BROWN: LIVE
For the U.K.
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
11. Only use attachments/accessories specified by the
manufacturer.
12. Never use with a cart, stand, tripod, bracket,
or table except as specified by the
manufacturer, or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination to
avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when
unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
For the USA
DECLARATION OF CONFORMITY
Compliance Information Statement
Model Name :
Type of Equipment :
Responsible Party :
Address :
Telephone :
DV-7DL PRO
VIDEO EDITING SYSTEM
Edirol Corporation North America
425 Sequoia Drive, Suite 114, Bellingham, WA 98226
(360) 594-4276
3
This product complies with the requirements of European Directives EMC 89/336/EEC and LVD 73/23/EEC.
For EU Countries
For EU Countries
Apparatus containing
Lithium batteries
ADVARSEL!
Lithiumbatteri - Eksplosionsfare ved
fejlagtig håndtering.
Udskiftning må kun ske med batteri af
samme fabrikat og type.
Levér det brugte batteri tilbage til
leverandøren.
VARNING
Explosionsfara vid felaktigt batteribyte.
Använd samma batterityp eller en
ekvivalent typ som rekommenderas av
apparattillverkaren.
Kassera använt batteri enligt
fabrikantens instruktion.
CAUTION
Danger of explosion if battery is
incorrectly replaced.
Replace only with the same or
equivalent type recommended by the
manufacturer.
Discard used batteries according to the
manufacturer’s instructions.
ADVARSEL
Eksplosjonsfare ved feilaktig skifte av
batteri.
Benytt samme batteritype eller en
tilsvarende type anbefalt av
apparatfabrikanten.
Brukte batterier kasseres i henhold til
fabrikantens instruks joner.
VAROITUS
Paristo voi räjähtää, jos se on
virheellisesti asennettu.
Vaihda paristo ainoastaan
laitevalmistajan suosittelemaan
tyyppiin. Hävitä käytetty paristo
valmistajan ohjeiden mukaisesti.
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.
NOTICE
AVIS
For the USA
FEDERAL COMMUNICATIONS COMMISSION
RADIO FREQUENCY INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Unauthorized changes or modification to this system can void the users authority to operate this equipment.
This equipment requires shielded interface cables in order to meet FCC class B Limit.
For Canada
DV-7DL_PRO_e2.book 3 ページ ２００５年１月７日 金曜日 午後１２時２分
4
USING THE UNIT SAFELY
001
•
Before using this unit, make sure to read the
instructions below, and the Owner’s Manual.
..........................................................................................................
001-50
•
Connect mains plug of this model to a mains
socket outlet with a protective earthing
connection.
..........................................................................................................
002a
•
Do not open or perform any internal modifica
-
tions on the unit.
..........................................................................................................
003
•
Do not attempt to repair the unit, or replace parts
within it (except when this manual provides
specific instructions directing you to do so). Refer
all servicing to your retailer, the nearest Roland
Service Center, or an authorized Roland
distributor, as listed on the “Information” page.
..........................................................................................................
004
•
Never use or store the unit in places that are:
•
Subject to temperature extremes (e.g., direct
sunlight in an enclosed vehicle, near a heating
duct, on top of heat-generating equipment); or
are
• Damp (e.g., baths, washrooms, on wet floors);
or are
• Humid; or are
• Exposed to rain; or are
• Dusty; or are
• Subject to high levels of vibration.
..........................................................................................................
007
•
Make sure you always have the unit placed so it is
level and sure to remain stable. Never place it on
stands that could wobble, or on inclined surfaces.
..........................................................................................................
008a
•
The unit should be connected to a power supply
only of the type described in the operating instruc
-
tions, or as marked on the rear side of unit.
..........................................................................................................
008e
•
Use only the attached power-supply cord. Also,
the supplied power cord must not be used with
any other device.
..........................................................................................................
009
•
Do not excessively twist or bend the power cord,
nor place heavy objects on it. Doing so can
damage the cord, producing severed elements and
short circuits. Damaged cords are fire and shock
hazards!
..........................................................................................................
010
•
This unit, either alone or in combination with an
amplifier and headphones or speakers, may be
capable of producing sound levels that could
cause permanent hearing loss. Do not operate for
a long period of time at a high volume level, or at
a level that is uncomfortable. If you experience
any hearing loss or ringing in the ears, you should
immediately stop using the unit, and consult an
audiologist.
..........................................................................................................
011
•
Do not allow any objects (e.g., flammable material,
coins, pins); or liquids of any kind (water, soft
drinks, etc.) to penetrate the unit.
..........................................................................................................
Used for instructions intended to alert
the user to the risk of injury or material
damage should the unit be used
improperly.
* Material damage refers to damage or
other adverse effects caused with
respect to the home and all its
furnishings, as well to domestic
animals or pets.
Used for instructions intended to alert
the user to the risk of death or severe
injury should the unit be used
improperly.
The ● symbol alerts the user to things that must be
carried out. The specific thing that must be done is
indicated by the design contained within the circle. In
the case of the symbol at left, it means that the power-
cord plug must be unplugged from the outlet.
The symbol alerts the user to important instructions
or warnings.The specific meaning of the symbol is
determined by the design contained within the
triangle. In the case of the symbol at left, it is used for
general cautions, warnings, or alerts to danger.
The symbol alerts the user to items that must never
be carried out (are forbidden). The specific thing that
must not be done is indicated by the design contained
within the circle. In the case of the symbol at left, it
means that the unit must never be disassembled.
DV-7DL_PRO_e2.book 4 ページ ２００５年１月７日 金曜日 午後１２時２分
5
012a:
•
Immediately turn the power off, remove the
power cord from the outlet, and request servicing
by your retailer, the nearest Roland Service
Center, or an authorized Roland distributor, as
listed on the “Information” page when:
• The power-supply cord, or the plug has been
damaged; or
• If smoke or unusual odor occurs
• Objects have fallen into, or liquid has been
spilled onto the unit; or
• The unit has been exposed to rain (or otherwise
has become wet); or
• The unit does not appear to operate normally or
exhibits a marked change in performance.
..........................................................................................................
013
•
In households with small children, an adult
should provide supervision until the child is
capable of following all the rules essential for the
safe operation of the unit.
..........................................................................................................
014
•
Protect the unit from strong impact.
(Do not drop it!)
..........................................................................................................
015
•
Do not force the unit’s power-supply cord to share
an outlet with an unreasonable number of other
devices. Be especially careful when using
extension cords—the total power used by all
devices you have connected to the extension
cord’s outlet must never exceed the power rating
(watts/amperes) for the extension cord. Excessive
loads can cause the insulation on the cord to heat
up and eventually melt through.
..........................................................................................................
016
•
Before using the unit in a foreign country, consult
with your retailer, the nearest Roland Service
Center, or an authorized Roland distributor, as
listed on the “Information” page.
..........................................................................................................
017
•
The Voltage Selection Switch permits you to
operate the unit with a number of different line
voltages. You must never change the switch
setting unless you are absolutely sure of what is
appropriate for the region you are located. Always
consult with your dealer, or qualified Roland
service personnel before touching the switch.
..........................................................................................................
023
•
DO NOT play a CD-ROM disc on a conventional
audio CD player. The resulting sound may be of a
level that could cause permanent hearing loss.
Damage to speakers or other system components
may result.
..........................................................................................................
026
•
Do not put anything that contains water (e.g.,
flower vases) on this unit. Also, avoid the use of
insecticides, perfumes, alcohol, nail polish, spray
cans, etc., near the unit. Swiftly wipe away any
liquid that spills on the unit using a dry, soft cloth.
..........................................................................................................
101a
•
The unit should be located so that its location or
position does not interfere with its proper venti
-
lation.
..........................................................................................................
102b
•
Always grasp only the plug on the power-supply
cord when plugging into, or unplugging from, an
outlet or this unit.
..........................................................................................................
103a:
•
At regular intervals, you should unplug the power
plug and clean it by using a dry cloth to wipe all
dust and other accumulations away from its
prongs. Also, disconnect the power plug from the
power outlet whenever the unit is to remain
unused for an extended period of time. Any
accumulation of dust between the power plug and
the power outlet can result in poor insulation and
lead to fire.
..........................................................................................................
104
•
Try to prevent cords and cables from becoming
entangled. Also, all cords and cables should be
placed so they are out of the reach of children.
..........................................................................................................
106
•
Never climb on top of, nor place heavy objects on
the unit.
..........................................................................................................
107b
•
Never handle the power cord or its plugs with wet
hands when plugging into, or unplugging from,
an outlet or this unit.
..........................................................................................................
108a
•
Before moving the unit, disconnect the power
plug from the outlet, and pull out all cords from
external devices.
..........................................................................................................
109a
•
Before cleaning the unit, turn off the power and
unplug the power cord from the outlet (
p. 30
).
..........................................................................................................
110a
•
Whenever you suspect the possibility of lightning
in your area, pull the plug on the power cord out
of the outlet.
DV-7DL_PRO_e2.book 5 ページ ２００５年１月７日 金曜日 午後１２時２分
6
IMPORTANT NOTES
291a
In addition to the items listed under “USING THE UNIT SAFELY” on p. 3 , please read and observe the following:
Power Supply
301
•
Do not connect this unit to same electrical outlet that is
being used by an electrical appliance that is controlled by
an inverter (such as a refrigerator, washing machine,
microwave oven, or air conditioner), or that contains a
motor. Depending on the way in which the electrical
appliance is used, power supply noise may cause this unit
to malfunction or may produce audible noise. If it is not
practical to use a separate electrical outlet, connect a
power supply noise filter between this unit and the
electrical outlet.
307
•
Before connecting this unit to other devices, turn off the
power to all units. This will help prevent malfunctions
and/or damage to speakers or other devices.
308
•
Although the LCD and LEDs are switched off when the
POWER switch is switched off, this does not mean that the
unit has been completely disconnected from the source of
power. If you need to turn off the power completely, first
turn off the POWER switch, then unplug the power cord
from the power outlet. For this reason, the outlet into
which you choose to connect the power cord’s plug
should be one that is within easy reach.
Placement
351
•
Using the unit near power amplifiers (or other equipment
containing large power transformers) may induce hum.
To alleviate the problem, change the orientation of this
unit; or move it farther away from the source of inter-
ference.
352a
•
This device may interfere with radio and television
reception. Do not use this device in the vicinity of such
receivers.
352b
•
Noise may be produced if wireless communications
devices, such as cell phones, are operated in the vicinity of
this unit. Such noise could occur when receiving or initi-
ating a call, or while conversing. Should you experience
such problems, you should relocate such wireless devices
so they are at a greater distance from this unit, or switch
them off.
354a
•
Do not expose the unit to direct sunlight, place it near
devices that radiate heat, leave it inside an enclosed
vehicle, or otherwise subject it to temperature extremes.
Excessive heat can deform or discolor the unit.
355b
•
When moved from one location to another where the
temperature and/or humidity is very different, water
droplets (condensation) may form inside the unit. Damage
or malfunction may result if you attempt to use the unit in
this condition. Therefore, before using the unit, you must
allow it to stand for several hours, until the condensation
has completely evaporated.
Maintenance
401a
•
For everyday cleaning wipe the unit with a soft, dry cloth
or one that has been slightly dampened with water. To
remove stubborn dirt, use a cloth impregnated with a
mild, non-abrasive detergent. Afterwards, be sure to wipe
the unit thoroughly with a soft, dry cloth.
402
•
Never use benzine, thinners, alcohol or solvents of any
kind, to avoid the possibility of discoloration and/or
deformation.
Repairs and Data
•
Please be aware that all data contained in the unit’s
memory may be lost when the unit is sent for repairs.
Important data should always be backed up a DV tape, or
written down on paper (when possible). During repairs,
due care is taken to avoid the loss of data. However, in
certain cases (such as when circuitry related to memory
itself is out of order), we regret that it may not be possible
to restore the data, and Roland assumes no liability
concerning such loss of data.
Additional Precautions
551
•
Please be aware that the contents of memory can be
irretrievably lost as a result of a malfunction, or the
improper operation of the unit. To protect yourself against
the risk of loosing important data, we recommend that
you periodically save a backup copy of important data
you have stored in the unit’s memory on a DV tape.
552
•
Unfortunately, it may be impossible to restore the contents
of data that was stored on a hard disk once it has been
lost. Roland Corporation assumes no liability concerning
such loss of data.
553
•
Use a reasonable amount of care when using the unit’s
buttons, sliders, or other controls; and when using its jacks
and connectors. Rough handling can lead to malfunctions.
556
•
When connecting / disconnecting all cables, grasp the
connector itself—never pull on the cable. This way you
will avoid causing shorts, or damage to the cable’s
internal elements.
557
•
A small amount of heat will radiate from the unit during
normal operation.
558a
•
To avoid disturbing your neighbors, try to keep the unit’s
volume at reasonable levels. You may prefer to use
headphones, so you do not need to be concerned about
those around you (especially when it is late at night).
DV-7DL_PRO_e2.book 6 ページ ２００５年１月７日 金曜日 午後１２時２分
7
559a
•
When you need to transport the unit, package it in the box
(including padding) that it came in, if possible. Otherwise,
you will need to use equivalent packaging materials.
562
•
Use a cable from Roland to make the connection. If using
some other make of connection cable, please note the
following precautions.
• Some connection cables contain resistors. Do not use
cables that incorporate resistors for connecting to this
unit. The use of such cables can cause the sound level
to be extremely low, or impossible to hear. For infor-
mation on cable specifications, contact the manufac-
turer of the cable.
• Due to the structural design of this instrument, small pets
or other animals could end up getting trapped inside it. If
such a situation is encountered, you must immediately
switch off the power and disconnect the power cord from
the outlet. You should then consult with the retailer from
whom the instrument was purchased, or contact the
nearest Roland Service Center.
Handling CD-ROMs
801
•
Avoid touching or scratching the shiny underside
(encoded surface) of the disc. Damaged or dirty CD-ROM
discs may not be read properly. Keep your discs clean
using a commercially available CD cleaner.
Handling Hard Disks
Important Performance and Image
Data
811
•
Once a hard disk fails to function normally, all data that
has been stored on it could be destroyed.
All hard disks eventually wear out.
We recommend that
you consider the hard disk not as a permanent storage
site, but as a place to store data temporarily. We also
recommend that you back up important performance and
image data that cannot be recorded again onto the
external media that is supported by your device. For
instructions on how to make such backups, refer to the
owner’s manual for your device.
Note that Roland assumes no liability whatsoever,
including monetary compensation, for the loss of any
recorded content in the event of the malfunction of, or
physical damage to the hard disk, or for any direct or
incidental damages resulting from the loss of such data.
Precautions Regarding Setup and Use
812
•
Certain hard disk setup procedures and usage conditions
may result in the corruption of recorded data, malfunc-
tioning, or physical damage to the disk, so be sure to
observe the following precautions.
• Do not subject the hard disk to vibration or shock,
especially while the unit is in operation.
• Do not set up the unit in any location where it may be
affected by vibration from external sources, or on any
surface that is not stable and level.
• If the device includes a cooling fan, ensure that the fan
and the side panel air vents remain unobstructed.
• Do not leave the unit in any environment subject to
temperature extremes; for example, in a closed
automobile in summer or outdoors during winter.
• Do not use the unit in conditions of high temperature
and humidity or in any location subject to rapid
temperature changes.
• Do not unplug the power cord or switch off any circuit
breakers in the circuit to which the unit is connected
while the power is turned on.
• Do not move the unit while the power is turned on or
immediately after turning off the power. When trans-
porting the unit, first turn off the power and confirm
that the display screen has gone off, disconnect the
power plug, then wait at least two minutes before
moving the device.
Emergency Procedures
813
*
The following procedures are to be used as emergency
measures only, and are not recommended for normal
operation.
• If the device fails to respond to operational commands or
does not complete operations, turn off the power. If the
power does not shut off following normal shutdown
procedures, disconnect the power plug.
If the unit does not operate normally when the power is
turned on again, it may mean that the hard disk has been
damaged. In such instances, consult your dealer or the
nearest Roland Service Center. Note, however, that it may
not be possible to recover any data from the hard disk
once it has been lost.
If your device features drive check capabilities, use the
drive check function to regularly confirm that there are no
problems, even when the device is operating normally.
For more detailed information on the shutdown and drive
check procedures, refer to the Owner’s Manual.
Copyright
851
•
Unauthorized recording, distribution, sale, lending, public
performance, broadcasting, or the like, in whole or in part,
of a work (musical composition, video, broadcast, public
performance, or the like) whose copyright is held by a
third party is prohibited by law.
852a ----
•
When exchanging video signals with an external device
via a digital connection, this unit can perform recording
without being subject to the restrictions of the Copy
Generation Management System (CGMS). This is because
this unit is intended expressly for video production, and is
designed not to be subject to restrictions for the
production of works that do not infringe on copyrights
held by others (such as video sequences you create
yourself). (CGMS is a system designed to prevent
recording of copies.)
853
•
Do not use this unit for purposes that could infringe on a
copyright held by a third party. We assume no responsi-
bility whatsoever with regard to any infringements of
third-party copyrights arising through your use of this
unit.
DV-7DL_PRO_e2.book 7 ページ ２００５年１月７日 金曜日 午後１２時２分
8
Contents
USING THE UNIT SAFELY
......................................................................
4
IMPORTANT NOTES
...............................................................................
6
Contents
..................................................................................................
8
Conventions Used in This Manual
......................................................
15
Introduction
...........................................................................................
16
Direct Linear Editing
....................................................................................................................
16
A Simple, Easy-to-understand Digital-video Editing Unit
.....................................................
16
Nonstop Editing Features
............................................................................................................
16
Enhanced Effects
...........................................................................................................................
16
Convenient Audio-editing Features
...........................................................................................
17
Create Sophisticated Titles with Ease
........................................................................................
17
Other Features
...............................................................................................................................
17
Names of Things and What They Do
...................................................
18
DV-7DL PRO Unit
.......................................................................................................
18
Front Panel
.....................................................................................................................................
18
Rear Panel
.......................................................................................................................................
19
Accessories
....................................................................................................................
20
Mouse
..............................................................................................................................................
20
Installing the Unit
..................................................................................
22
Making the Connections
.............................................................................................
23
Connection Sequence
....................................................................................................................
24
Connecting the Video Equipment
..............................................................................................
26
Connecting Audio Equipment
....................................................................................................
28
Starting Up / Shut Down
.......................................................................
30
Starting Up
.....................................................................................................................................
30
Shutting Down
...............................................................................................................................
31
Using the Mouse
...................................................................................
32
Getting Ready to Edit
...........................................................................
34
What Is a Project?
..........................................................................................................................
34
Creating a New Project
...............................................................................................
35
Opening an Existing Project
.......................................................................................
36
Name and Functions of Editing Screen Features
..............................
38
Capturing Video Material
.....................................................................
40
Capturing Video Material
...........................................................................................
40
Get ready to perform capture.
.....................................................................................................
40
Name and Function of Capture Screen
......................................................................................
41
Capturing Video Material from DV
...........................................................................................
42
Using DV Auto Split After Capture
...........................................................................................
48
Capturing from Analog Jacks (S-VIDEO or VIDEO Jacks)
.....................................................
49
Using the One-frame Record Feature
.........................................................................................
52
Making Advanced Settings for Captured Video Material
.....................................
54
About the Material Window .......................................................................................................54
DV-7DL_PRO_e2.book 8 ページ ２００５年１月７日 金曜日 午後１２時２分
9
Contents
Displaying the Detailed View Window
.....................................................................................
54
Names and Features of the Detailed View Window
................................................................
55
Playing Back Material on the Material Palette
..........................................................................
56
Setting the Length of Material (In Point/Out Point)
...............................................................
58
Color Correction Feature
.............................................................................................................
61
Naming Captured Material
.........................................................................................................
63
Adding a Note to Captured Material
.........................................................................................
65
Editing Video
.........................................................................................
66
Basic of Editing
.............................................................................................................
66
Storyboard Palette & Timeline Palette
.......................................................................................
66
Selecting Material
..........................................................................................................................
67
Redo (Undo) Feature
....................................................................................................................
67
Performing Editing on the Storyboard Palette
........................................................
68
Names and Features of Components on the Storyboard Palette
...........................................
68
Changing to the Storyboard Palette
...........................................................................................
69
Basic Operation of Storyboard
...................................................................................
70
Arranging Video Material (Storyboard)
....................................................................................
70
Making Advanced Settings for Arranged Video Material (Storyboard Palette)
.................
71
Changing the Order of Material (Storyboard)
..........................................................................
72
Copying the Order of Material (Storyboard)
............................................................................
73
Playing Back a Sequence (Storyboard)
.......................................................................................
74
Applying Effects When Video Material Changes (Storyboard Palette)
................................
75
Performing Editing on the Timeline Palette
............................................................
78
Names and Features of Components on the Timeline Palette
...............................................
78
Changing to the Timeline Palette
................................................................................................
79
Basic Operation of Timeline Palette
..........................................................................
80
Position Bar
....................................................................................................................................
80
Audio Scrub
...................................................................................................................................
81
Playing Back the Sequence (Timeline Palette)
..........................................................................
82
Enlarging or Reducing the Timeline Palette
.............................................................................
84
Arranging Video Material (Timeline)
........................................................................................
85
Copying Video Material (Timeline Palette)
..............................................................................
86
Edit Mode Referenced to the Main Track
..................................................................................
87
Removing Placed Material (Timeline)
.......................................................................................
88
Moving Placed Material (Timeline)
............................................................................................
90
Replacing Placed Material (Timeline)
........................................................................................
91
Copying Material (Timeline)
.......................................................................................................
92
Changing the Length of Material on the Timeline Palette
......................................................
94
Finding Material in the Material palette from the Timeline
...................................................
95
Making Advanced Settings for Arranged Video Material (Timeline Palette)
......................
95
How to Apply Transition Effects (Transition FX)
....................................................................
96
Using the Insert Track
................................................................................................................
100
Capturing Audio Material
...................................................................
102
Capturing Audio Material
........................................................................................
102
Capturing Audio from a Cassette Tape or Other Audio Device
..........................................
102
Capturing Audio from CD
........................................................................................................
106
Capturing Sounds Created on a Computer
.............................................................................
109
Making Advanced Settings for Captured Audio Material .................................. 110
About the Material Window ..................................................................................................... 110
Displaying the Detailed View Window................................................................................... 110
Names and Features of the Detailed View Window.............................................................. 111
Playing Back Material on the Material Palette........................................................................ 112
Setting the Length of Material (In Point/Out Point) ............................................................. 114
Naming Captured Material ....................................................................................................... 117
Adding a Note to Captured Material....................................................................................... 119
DV-7DL_PRO_e2.book 9 ページ ２００５年１月７日 金曜日 午後１２時２分
10
Contents
Editing Audio
.......................................................................................
120
Editing Captured Audio
...........................................................................................
120
Arranging Audio Material
.........................................................................................................
120
Expanded View of the Audio Tracks
.......................................................................................
121
Using Multiple Pieces of Audio Material at One Time
.........................................................
122
Inserting Audio While Playing Back a Sequence (Punch-In Feature)
.................................
123
Inserting Narration
....................................................................................................
125
Deleting Placed Audio Material
................................................................................................
127
Moving Placed Audio Material
.................................................................................................
127
Copying Placed Audio Material
...............................................................................................
127
Replacing Placed Audio Material
.............................................................................................
127
Adjusting the Length of Placed Audio Material
....................................................................
127
Adjusting the Volume
...............................................................................................
128
Normalizing the Volume of Different Tracks in Advance
....................................................
128
Making the Volume Level Rise and Fall Gradually
...............................................................
129
Applying Partial Volume Changes
...........................................................................................
131
Creating Titles
.....................................................................................
132
Names and Features of the Components of the Titler
...........................................................
132
Display the Titler.
.......................................................................................................
134
Close the Titler.
............................................................................................................................
134
Creating a Title
...........................................................................................................
135
Displaying on the Monitor
.........................................................................................................
135
Saving a Created Title
...............................................................................................
136
Saving a Created Title by Overwriting
....................................................................................
136
Saving a Created Title Under a Different Name
....................................................................
137
Creating Text
..............................................................................................................
138
Changing the Typeface (Font)
...................................................................................................
140
Adjusting the Size of Text
..........................................................................................................
142
Adjusting the Angle of Text
......................................................................................................
143
You can make the setting for either vertical or horizontal text.
...........................................
144
Changing the Text Spacing (Pitch)
...........................................................................................
145
Using Foreign Characters and Special Symbols
.....................................................................
146
Drawing Shapes
.........................................................................................................
148
Drawing Lines
............................................................................................................
150
Drawing Straight Lines
..............................................................................................................
150
Drawing Curves
..........................................................................................................................
152
User defined Text and Shapes
..................................................................................
154
Simple User Defined Styles
.......................................................................................................
154
Text/Shape Embellishment Palette
..........................................................................................
156
Applying Color
............................................................................................................................
158
Applying Gradation to Text and Shapes
.................................................................................
162
Pasting Textures into Text and Shapes
....................................................................................
164
Applying Edge
.............................................................................................................................
166
Applying Shadow
.......................................................................................................................
169
Types of Pictures
........................................................................................................
172
Using Built-in Pictures
................................................................................................................
172
Making Part of a Title into a Picture......................................................................................... 175
Modifying Pictures...................................................................................................................... 176
Capturing External Title Material............................................................................................. 178
Creating a Picture from Video on the Timeline...................................................................... 180
Replacing Pictures....................................................................................................................... 181
Layout the Text / Shapes / Pictures....................................................................... 182
Adjust the position...................................................................................................................... 182
DV-7DL_PRO_e2.book 10 ページ ２００５年１月７日 金曜日 午後１２時２分
11
Contents
Adjust the size.
............................................................................................................................
183
Deleting Text and Shapes
...........................................................................................................
184
Copying Object
............................................................................................................................
185
Overlapping Objects
...................................................................................................................
186
How to Select Overlapping Shapes
..........................................................................................
187
Grid View
.....................................................................................................................................
188
Arranging Text and Shapes Using the Guide
.........................................................................
188
Auto Layout Feature
...................................................................................................................
189
Making See-through Titles with Text and Shapes
..................................................................
190
Create Background
....................................................................................................
192
Use Background Built in
............................................................................................................
192
Making the Setting for a Monochrome Background
..............................................................
196
Making Video Material into a Still Picture
..............................................................................
197
Creating Rolling Titles
..............................................................................................
198
Entering Text Spanning Multiple Lines at One Time
............................................................
202
Importing Text from a Computer
.............................................................................................
206
Aligning Text and Shapes with a Specified Location
............................................................
208
Moving Text Strings As a Group (Inserting Blank Lines/Removing Unneeded Space
Between Lines)
.............................................................................................................................
209
Creating a Crawling Title
.........................................................................................
210
Setting the Length of a Title, and How It Appears and Disappears
..................
214
Making Settings for How Titles Appear and Disappear
......................................
215
Changing the Settings for the Titler
........................................................................
216
Editing Title
.........................................................................................
218
Inserting Titles into a Sequence
...............................................................................
218
Deleting a Placed Title
................................................................................................................
220
Moving a Placed Title
.................................................................................................................
220
Copying a Placed Title
................................................................................................................
220
Replacing a Placed Title
.............................................................................................................
220
Adjusting the Length (Duration) of a Placed Title
.................................................................
220
Inserting Title While Playing Back a Sequence
(Punch-In Feature)
......................................................................................................................
221
Modifying a Title Placed on the Timeline Palette
..................................................................
223
Effects
..................................................................................................
226
Transition Effects (Transition FX)
............................................................................
226
Applying Transition Effects (Transition FX)
...........................................................................
226
Bridges
..........................................................................................................................................
228
Rendering
.....................................................................................................................................
229
Making Settings for Transition Effects (Transition FX)
.........................................................
230
Filter Effects (Filter FX)
.............................................................................................
232
Applying Filter Effects (Filter FX)
.............................................................................................
232
Making Settings for Filter Effects (Filter FX)
...........................................................................
233
Composition Effects (Composition FX)
..................................................................
234
Applying Composition Effects (Composition FX)
.................................................................
234
Making Settings for Composition Effects (Composition FX)
...............................................
235
Audio Effects (Audio FX)
.........................................................................................
236
Changing the Settings for Audio Effects (Audio FX)
.............................................................
237
Saving Created Effects in the Material palette....................................................... 239
Using the Motion Feature to Make Settings for Movement ................................ 240
Creating a Moving Inset Screen ................................................................................................ 241
Moving Mosaic or Blur............................................................................................................... 246
DV-7DL_PRO_e2.book 11 ページ ２００５年１月７日 金曜日 午後１２時２分
12
Contents
Creating Material
.................................................................................
252
Creating Video Material with Effects
......................................................................
252
Slow Motion
.................................................................................................................................
254
Fast Motion
..................................................................................................................................
255
Reverse Motion
............................................................................................................................
256
Strobe Motion
..............................................................................................................................
257
Video with Afterimages (Image Trailer)
..................................................................................
258
Creating Video Inverted Vertically or Horizontally
..............................................................
259
Creating Audio Material with Effects
.....................................................................
260
Raising the Volume Level with Normalize
.............................................................................
260
Applying Voice Arranger
..........................................................................................................
262
Creating Still Video
....................................................................................................
264
Creating Still Video Material from Video Material
................................................................
264
Create Video Material from Still image
..................................................................
266
Create "Dynamic" Video Material from Still Image
...............................................................
266
Creating Still Video from Material on a CD-ROM or Card Reader
.....................................
272
Performing Detailed Editing on the Timeline Palette
......................
276
Names and Features of Components on the Timeline Palette
............................
276
Changing to the Timeline Palette
..............................................................................................
277
Basic Operation of Storyboard
.................................................................................
278
Various Methods for Moving the Position Bar
.......................................................................
278
Scrub Feature
...............................................................................................................................
279
Timeline Palette +/- Memory Buttons
.....................................................................................
280
Selecting Material
.......................................................................................................
281
Selecting Material on Multiple Tracks
.....................................................................................
281
Setting In points and Out points in a Sequence
....................................................
282
Using Timeline Markers
...........................................................................................
283
Add a Timeline Marker
..............................................................................................................
283
Delete a marker.
..........................................................................................................................
284
Arranging Video Material (Timeline)
.....................................................................
285
Removing Placed Material (Timeline)
....................................................................
286
Removing All Material in a Specified Range
..........................................................................
287
Moving Placed Material (Timeline)
.........................................................................
288
Overwrite Mode
.........................................................................................................
289
Insert Mode
.................................................................................................................
289
Copying Material
.......................................................................................................
290
Changing the Length of Material on the Timeline Palette
...................................
292
Moving the Seam for Material (Rolling Feature)
....................................................................
293
Splitting Material on a Track
....................................................................................
294
Making Advanced Settings for Arranged Video Material
...................................
295
Shifting Subsequent Material After Reducing the Length of a Piece of Material
..............
295
A/B Roll Editing
........................................................................................................
296
Switching the Video with the On-screen T-bar
......................................................................
298
Performing A/B Roll Editing for Only a Specific Range
......................................................
299
Modifying the Results of A/B Roll Editing............................................................................. 300
Editing Tracks............................................................................................................. 304
Packing Tracks Toward the Beginning .................................................................................... 304
Inserting a Blank Space in a Track............................................................................................ 306
Copying and Pasting Tracks...................................................................................................... 308
Temporarily Hiding the Video on the Insert Track (Mute) ................................. 309
DV-7DL_PRO_e2.book 12 ページ ２００５年１月７日 金曜日 午後１２時２分
13
Contents
Extracting Synchronized Audio Recording
...........................................................
310
Feature for Grouping Part of a Sequence As a Single Piece of Video Material
312
About Rendering
........................................................................................................
314
Deleting a Sequence
...................................................................................................
315
Management Materials
.......................................................................
316
About the Material Palette
.........................................................................................................
316
Changing the Material Palette
.................................................................................
316
Naming Captured Material
......................................................................................
317
Using the Fixed Thumbnail View Feature
..............................................................................
318
Feature for Changing the Audio-material Icons
.....................................................................
319
Finding the Material You Need in the Material palette
.......................................
320
Changing the Appearance of the Material Palette
.................................................................
320
Change the way material is arranged to find what you’re looking for.
..............................
321
Deleting Material in the Material palette
...............................................................
322
Deleting Material Not in Use in a Sequence
..........................................................
324
Extracting Material
....................................................................................................
325
Recording the Sequence
....................................................................
328
Getting Ready to Record a Sequence
......................................................................
328
Connecting Equipment for Recording
.....................................................................................
328
Adjusting the Volume Level
......................................................................................................
328
Recording a Sequence
...............................................................................................
330
Using the Library
................................................................................
334
Saving to the Library
.................................................................................................
334
Importing from the Library
......................................................................................
336
Deleting Material from the Library
.........................................................................
337
Using Projects
.....................................................................................
338
Creating a New Project
.............................................................................................
338
Open the project.
........................................................................................................
339
Saving a Project
..........................................................................................................
340
Copying a Project
.......................................................................................................
341
Changing the Name of a Project
..............................................................................
342
Deleting a Project
.......................................................................................................
342
Feature for Listing and Managing Projects
............................................................
343
Customizing System Settings
...........................................................
345
Other Features
....................................................................................
346
Offset Display Feature
...............................................................................................
346
Loop Play Feature
......................................................................................................
347
Feature for Synchronizing with an External Device
.............................................
348
Feature for Capturing Computer-generated Data
................................................
350
Capturing Computer-generated Still-picture Data
................................................................
350
Exchanging Video with a Computer Through a DV Jack
.....................................................
354
Using Editing Data from a DV-7/DV-7R/DV-7PR .............................................. 355
DV-7DL_PRO_e2.book 13 ページ ２００５年１月７日 金曜日 午後１２時２分
14
Contents
Using Data from the DV-7DL PRO on a DV-7/DV-7R
.........................................................
355
Feature for Resolving Data Errors, Etc.
..................................................................
356
Feature for Eliminating Audio Popping
..................................................................................
356
Feature for Checking the Hard Disk
........................................................................................
357
Feature for Checking Video Material
.......................................................................................
358
If a Problem Occurs
.....................................................................................................................
359
Trouble Shooting
................................................................................
360
If a Message Is Displayed
.........................................................................................
362
Glossary
...............................................................................................
363
Specifications
......................................................................................
366
Index
.....................................................................................................
368
DV-7DL_PRO_e2.book 14 ページ ２００５年１月７日 金曜日 午後１２時２分
15
Conventions Used in This Manual
New Features on the DV-7DL PRO
Features indicated by __ are newly added with the DV-7DL PRO. This symbol appears in the
descriptions of features added since the DV-7DL.
Explanations of Operations
The explanations in this manual are based on the operations of the mouse and keyboard
included with the DV-7DL PRO, as well as the DV-7DLC and the DL-CR1.
- For information on mouse operation, refer to
p. 32
.
- For information on the operation of the DV-7DLC, refer to the "DV-7DLC Owner's Manual."
- For information on the operation of the DL-CR1, refer to the "DL-CR1 Owner's Manual."
Important Notes
You should give particular attention to the explanations marked with a " *," since they contain
important cautionary information that you should be aware of. Be sure to read them carefully.
This manual uses graphic representations of the display to explain features, but please be
aware that the factory-default settings (the values for various setting items) may not always
match what is portrayed by the graphic representations.
DV-7DL_PRO_e2.book 15 ページ ２００５年１月７日 金曜日 午後１２時２分
16
Introduction
Direct linear video editing lets you create sequences just the way you want, offering
immediate expression of your creative aspirations. You can carry out operations intuitively,
without interrupting your creative thinking processes. All you need to create great sequences
is sensitive expressiveness---it's almost like playing a musical instrument.The DV-7DL PRO is
provided with the following features, making it possible to achieve direct linear editing. A
dedicated video editing units that let you start editing right away, edit by feel rather than by
frames.
A Dedicated Video-editing Unit That Lets You Start Editing Right Away
This is a dedicated video-editing unit, so you can start editing as soon as you turn the unit on.
A Simple, Easy-to-use Operating Environment
This unit is designed expressly for video editing, so you can start using it productively right
away, even if you're a first-time user. Non-editing tasks take up very little time or trouble. You
can plunge right into the realm of editing immediately, without having to learn or remember
any difficult computer operations.
Intuitive A/B Roll Editing
The unit features an A/B roll editor, which lets you switch intuitively between the video
captured from two video cameras. You can use the DV-7DLC to switch the video any way you
want.
A Robust System
This unit boasts a stable system that remains completely reliable even during long editing
sessions. You can carry out editing without worry, even when working on lengthy sequences.
The unit also features built-in data protection, which backs up your data during editing. This
protects important data even if the power is inadvertently switched off.
Operations with a Linear Feel
This unit is equipped with nonstop editing features, which let you edit a sequence as you play
it back. For instance, you can perform such editing operations as inserting video, titles, and
narration while sequence playback is in progress. This lets you make well-timed edits, much
like linear editing.
Punch-In and Punch-Out Features
You can paste in titles and audio material at just the right timing as you play back a sequence.
You can perform pasting in a single step, so you don't have to make any troublesome settings.
Newly developed real-time processing features let you carry out video editing with versatile
effects (dissolve and wipe), titles, and even two-picture compositing, such as picture-in-picture
and double exposure, without having to perform rendering.
Added Effects
Eight new effects have been added to the effects available with the DV-7DL PRO. included are
in real-time effects, such as Luminance Key and Chroma Key, which formerly required
rendering.
Direct Linear Editing
A Simple, Easy-to-understand Digital-video Editing Unit
Nonstop Editing Features
Enhanced Effects
DV-7DL_PRO_e2.book 16 ページ ２００５年１月７日 金曜日 午後１２時２分
17
Introduction
Narration Features
You can add narration directly using a microphone as you play back a sequence. This lets you
insert narration at the scenes you want as you view sequence playback, just like professional
post-recording. And of course you can redo the operation as many times as you like.
Scrub Audio
The scrub audio lets you perform edits of your sequences that are referenced to subtle changes
in the sound. This makes it possible to perform editing at just the right places where the vocals
and music change.
High-quality Audio Processing
Roland's audio-processing technology lets you perform high-quality audio processing. You
can apply such audio effects as a four-band equalizer and compressor, enabling you to enhance
the audio in your sequence.
A Rich Array of Text Embellishments
You can enhance text with such embellishments as edge, shadow, and see-through text. The
unit also comes with 22 font styles, enabling you to create titles perfectly matched to the mood
and atmosphere.
A Wide Range of Shape-drawing Features
In addition to creating text, you can also draw circles, squares, and other shapes, as well as lines
and curves. By combining these shapes, you can create titles that are even more expressive.
Capture Video from External Sources
You can capture photographs and graphics from external sources by using CD-ROMs. This lets
you use your own original material to create your very own titles.
Create Rolling and Crawling Titles
You can easily use the Titler to create rolling and crawling titles, like the ending credits for
movies. It's also possible to capture text from a computer.
A Rich Array of Expansion Options
You can increase DV storage dramatically by purchasing additional removable hard disk.
Removable hard disks are easy to install and remove, allowing you to organize your work by
using a different disk for each project. A variety of other additional features are also available,
including picture-material collections which are useful for making titles, as well as video-
material collections.
External Synchronization Features
You can operate the unit in sync with a VS-2000/2400/2480 series audio multitrack recorder
from Roland. Synchronization with an external recorder capable of offering a rich variety of
audio capabilities lets you achieve sophisticated audio editing.
Convenient Audio-editing Features
Create Sophisticated Titles with Ease
Other Features
DV-7DL_PRO_e2.book 17 ページ ２００５年１月７日 金曜日 午後１２時２分
18
Names of Things and What They Do
1
CD-ROM drive
This is where a CD-ROM is inserted.
2
EJECT button
This lets you open the CD-ROM drive.
3
CD-ROM access light
This indicates when the CD-ROM drive is in
operation.
4
CD forced-eject hole
Use this hole if the CD-ROM drive does not open
because of some problem.
5
Removable hard-disk bay
This can be used to hold an optional removable
hard disk.
6
Headphones volume
This adjusts the volume level for the headphones.
7
PHONES jack
This is for connecting headphones.
8
MIC IN jack
This is for connecting a microphone.
9
Mic volume
This adjusts the volume level for the microphone.
10
DV 2 jack
This can be used to connect equipment that has a
DV jack, such as a digital video camera.
11
USB connector
This can be used to connect optional equipment
such as a memory-card reader.
12
Hard-disk light
This indicates when the hard disk is in use.
13
Power light
This indicates when the DV-7DL PRO is running.
14
Power switch
This switches on the DV-7DL PRO.
DV-7DL PRO Unit
Front Panel
1
5
234
6789
12
10 11
13 14
DV-7DL_PRO_e2.book 18 ページ ２００５年１月７日 金曜日 午後１２時２分
19
Names of Things and What They Do
1
Output connectors
These output video and audio to television
monitors and audio equipment.
2
Input connectors
These can be used to input video and audio from
video and audio equipment.
3
AC IN
This is for connecting the AC connector.
4
MOUSE connector
This is for connecting the mouse.
5
KEYBOARD connector
This is for connecting the keyboard.
6
USB connector
This is for connecting the mouse and the DV-
7DLC.
7
VGA connector
This is for connecting the display.
8
DV 1 jack
This can be used to connect equipment that has a
DV jack, such as a digital video camera.
*
In the interest of product improvement, the specifications and/or appearance of this unit are
subject to change without prior notice.
Rear Panel
12
35 7684
DV-7DL_PRO_e2.book 19 ページ ２００５年１月７日 金曜日 午後１２時２分
20
Names of Things and What They Do
1
Left button
This is used for operations such as confirming, selecting, and manipulating on-
screen items.
2
Right button
This is used to make settings for on-screen options.
Accessories
Mouse
12
Use the mouse on the included mouse pad or on a commercially available
optical mouse pad. Place the mouse pad on a flat and level surface.
Using the mouse on any surface without a pad may result in unintended
operation. Be sure to use a mouse pad.
DV-7DL_PRO_e2.book 20 ページ ２００５年１月７日 金曜日 午後１２時２分
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/