Roland C-330 Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the Roland C-330 Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
1
*5100009124 - 01*
Notice of New Functionality
New functionality has been added to the C-330. Please read this in conjunction with the owner's manual.
Page 44 “Saving or Loading Songs or Settings”
Sound settings (registration) stored in the C-330's internal memory, on USB memory, or in the factory-set can be copied into internal memory in units of
individual memory banks.
1. As a precaution, save the internal memory banks to USB
memory. (Refer to p. 45 of the owner's manual.)
In this case, choose a number that indicates (Empty).
2. To the USB connector, connect the USB memory that
contains the memory bank you want to load.
3. From the main screen, press the [Select/Menu] knob.
fig.D-Save-1.eps
4. Turn the [Select/Menu] knob to select “11 Save/Load
(USB).”
fig.Tremulant2.eps
5. Press the [Select/Menu] knob.
The “Save/Load (USB)” screen will appear.
ave-1.eps
6. Turn the [Select/Menu] knob to select “Copy General
Piston, “ and press the [Select/Menu] knob.
The “Copy General Piston” screen will appear.
7. Turn the [Select/Menu] knob to select the “Copy from,”
and turn the [Value/Exit Menu] knob to select “USB.”
8. Turn the [Select/Menu] knob to select the “No.,” and turn
the [Value/Exit Menu] knob to select the number of the
sound settings that you want to load.
9. Turn the [Select/Menu] knob to select the “Bank,” and
turn the [Value/Exit Menu] knob to select the bank that
you want to copy.
10. Turn the [Select/Menu] knob to select “INT,” and then
turn the [Value/Exit Menu] knob to choose M01–M20 as
the internal bank into which the data will be copied.
11. Press the [SET] piston.
A confirmation screen will appear.
When you copy the Memory Bank from USB memory, the internal
Bank will be deleted.
If you decide to cancel, press the [Value/Exit Menu] knob.
12. Press the [SET] piston; the sound settings of the specified
bank will be copied.
Copying the sound settings (registration) in units of individual memory banks
Setting Explanation
FACTORY
Copy a memory bank from the factory-
set
INTERNAL
Copy a memory bank from a current
internal settings
USB Copy a memory bank from USB memory
Copyright © 2009 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any form without
the written permission of ROLAND CORPORATION.
1
*5100009124 - 01*
©
06_USB_leaflet_01j_kq0610.fm 1 ページ 2009年6月10日 水曜日 午後12時21分
/