www.acti.com
PMAX-1604 Quick Installation Guide
PMAX-1604 is basically used to cover R11C-30 devices in indoor applications. If the device is
installed in a semi-outdoor environment, you MUST apply waterproofing methods to protect
the device.
After mounting the device and the cover, use silicone glue around the acrylic cover to ensure
moisture do not enter.
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Greenlee CM-900, CM-950 Clamp-on Meter, AC/DC (Europe) User manual
-
Beta 1760/RMS Operating instructions
-
-
-
Pyle PDMT25 Operating instructions
-
Extech Instruments EX810 User manual
-
-
Bosch MMD 540H User manual
-
-