MODEL T10049
DEEP THROATED
LEVER PRESS
INSTRUCTIONS
COPYRIGHT © JUNE, 2010 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#TS12959 PRINTED IN CHINA
Parts under pressure
could fly apart and cause
impact injuries. Always
wear safety glasses
when using this press.
Keep hands and fingers
away from the ram when
applying downward pres-
sure to avoid pinching
injuries.
Identification
Refer to Figure 1 and the following descriptions to
identify the different parts of the lever press and
their functions.
A. Ball Oiler: Allows oil to be added to the pin-
ion gear.
B. Down Stop: Limits the downward travel of
the ram with an adjustable set screw. This
stop can be positioned anywhere on the
ram.
C. Lever: Controls the travel of the ram.
D. Mounting Holes: Provide access to secure
the lever press to a workbench.
E. Hex Wrenches: Included for adjusting set
screws.
F. Relief Hole: Allows the ram to travel below
the top surface of the base.
G. Up Stop: Limits the upward travel of the ram
and can be positioned anywhere on the ram.
H. Ram: Applies downward pressure when the
lever is used.
Specifications
Ram Travel ....................................................... 5"
Throat ............................................................6
1
⁄4"
Mounting Hole Size .........................................
1
⁄4"
Force Rating ............................. 660 lbs. (300 kg)
Weight .......................................................29 lbs.
If you need help with your new lever press, call our
Tech Support at: (570) 546-9663.
NOTICE
The Model T10049 is designed to be used
ONLY as a lever press for small parts. It is
NOT intended to be used as a punch press
or modified for increased leverage.
Figure 1. Model T10049 identification.
B
G
H
C
F
E
D
A
-2-
T10049 Deep-Throated Lever Press
Parts
1
2
3
4
5
6
7
8
10
11
9
12
13
14
15
16
17
18
19
REF PART # DESCRIPTION REF PART # DESCRIPTION
1 PCAP16M CAP SCREW M4-.7 X 16 11 PT10049011 READ MANUAL LABEL
2 PT10049002 CLAMP 12 PT10049012 PRESS ARM
3 PT10049003 LOCK COLLAR 13 PT10049013 MACHINE ID LABEL
4 PCAP16M CAP SCREW M4-.7 X 16 14 PCAP47M CAP SCREW M10-1.5 X 40
5 PT10049005 RAM KEY 15 PRP106M ROLL PIN 10 X 40
6 PT10049006 RAM 16 PT10049016 BASE
7 PLUBE001M BALL OILER 6MM 17 PRP30M ROLL PIN 5 X 50
8 PT10049008 LEVER HUB 18 PT10049018 CASTING PLUG
9 PT10049009 LEVER 19 PSS25M SET SCREW M6-1 X 20
10 PT10049010 SAFETY GLASSES LABEL
-
1
-
2
