3
driver iNStallatioN
Insert the included driver CD in the computer’s CD-ROM drive.
For Windows 2000 / XP / Server 2003
1. On the Windows desktop, click "Start," then "Run."
2. Enter "D:\PCIe\MCS9901\XP\PCIeSetup32.exe," then click "OK."
3. Click “Install” to install the drivers.
4. Click “Exit” to complete the driver installation.
5. Shut down the PC.
6. Place the PCIe card into PCIe slot, then power on the system.
7. Once the system is booted, Windows will automatically start installing the device driver software.
For Windows XP-x64 / Server 2003-x64
1. On the Windows desktop, click "Start," then "Run."
2. Enter "D:\PCIe\MCS9901\XP64\PCIeSetup64.exe," then click "OK."
3. Click “Install” to install the drivers.
4. Click “Exit” to complete the driver installation.
5. Shut down the PC.
6. Place the PCIe card into PCIe slot, then power on the system.
7. Once the system is booted, Windows will automatically start installing the device driver software.