Lightolier C4P30D User manual

Lightolier
Brand
Lightolier
Model
C4P30D
Category
Work lights
Type
User manual

Lightolier C4P30D is a 4 1/2" Aperture PAR30 Reflector Trim that is part of the Calculite® Evolution Incandescent Open Downlight series. It features a 16-gauge Alzak® aluminum trim with a 50° visual cutoff to lamp and lamp image. The trim is removable from below for bottom relamping and is available with either a painted white or polished flange. The reflector housing snaps into the frame for easy tool-less installation and provides friction spring clips to secure the aperture cone.

Lightolier C4P30D is a 4 1/2" Aperture PAR30 Reflector Trim that is part of the Calculite® Evolution Incandescent Open Downlight series. It features a 16-gauge Alzak® aluminum trim with a 50° visual cutoff to lamp and lamp image. The trim is removable from below for bottom relamping and is available with either a painted white or polished flange. The reflector housing snaps into the frame for easy tool-less installation and provides friction spring clips to secure the aperture cone.

14 1/4"
Adjustment
(mounting bars
included)
13 3/4" to 24"
(IC AirSeal
®
)
C4AIC
10"
Adjustment
(mounting bars
included)
13 3/4" to 24"
O.A.
20 1/4"
8 1/2"
9 1/2" Dia.
O.A.
14 3/8"
7 3/4"
9 1/2" Dia.
O.A.
12 3/8"
7 3/4"
(Non-IC)
C4120
12 1/2"
(Non-IC AirSeal
®
)
C4A120
Calculite
®
Evolution Incandescent Open Downlight C4P30D
Page 1 of 2 4 1/2” Aperture PAR30 Reflector Trim
Features
1. Trim: 16 ga. Alzak
®
aluminum, 50° visual cutoff to lamp and lamp image.
Removable from below for bottom relamping. Available with painted white
or polished flange.
2. Reflector Housing: Snaps into frame for easy tool-less installation.
Provides friction spring clips to secure aperture cone. Interchangeable with
other Evolution 4" line voltage trims.
3. Socket Harness: Bracket mounted to reflector housing insuring correct
optical alignment. Medium base porcelain socket with nickel plated screw
shell, No. 18 SF-1 leads to keyed plug-in quick connector for power connec-
tion to junction box.
4. Frame-In Kit: Compatible Frame-In Kits are listed above.
Non-IC and Non-IC AirSeal
®
- Thermal insulation shall not be installed above
a recessed luminaire (fixture) or within 3 in. (75 mm) of the recessed lumi-
naire’s (fixture’s) enclosure or wiring compartment.
IC-AirSeal
®
- Fixture may be in direct contact with insulation.
Options and Accessories
Reflector Finishes
1
Champaign Bronze CCZ
Specular Clear CL
Specular Gold GD
Specular Black BK
Pewter CPW
White WH
1
Specify desired flange
W White, P Polished
Labels
UL Listed (suitable for damp locations).
Alzak
®
is a registered trademark of ALCOA.
US and Foreign Patents Pending.
Ceiling Cutout: 5 1/16" (129 mm) Dia.
Reflector Trim Frame-In Kit
C4P30D CCDW Comfort Clear Diffuse, White Flange Non-IC Non-IC AirSeal
®
IC-AirSeal
®
Non-IC
C4P30D CCDP Comfort Clear Diffuse, Polished Flange Remodeler
C4P30D Add suffix. See options for other finishes.
C4120 C4A120 C4AIC C4120RM
75W PAR30 75W PAR30 75W PAR30 75W PAR30
Short Neck Short Neck Short Neck
1-1/4" Max. Ceiling Thk.
* 7-3/4" min. is for up to 3/4" thick ceiling
7-3/4" min.*
8-1/4" max.
7"
5-3/4" Dia.
4-1/2" Dia.
C4P30DCCDW / C4120 or
C4P30DCCDW / C4A120
3
2
4
1
C4P30DCCDW / C4AIC
1/2" to 1" Thk. Ceiling
9-1/4"
5-3/4" Dia.
4-1/2" Dia.
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier a Genlyte Thomas Company www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2003 Genlyte Thomas Group LLC (Lightolier Division) • A0303
CCD is the recommended finish.
Shorth Neck
Date: Oct. 22, 2002
Prepared for
Lightolier, Fall River, MA
Tested According To IES Procedures. Test Distance Exceeds Five
Times The Greatest Luminous Opening Of Luminaire.
Coefficients of Utilization
% Effective Ceiling Cavity Reflectance
80 70 50 30 10 0
% Wall Reflectance
50 30 10 50 30 10 50 30 10 50 30 10 50 30 10 0
0 .92 .92 .92 .90 .90 .90 .86 .86 .86 .82 .82 .82 .79 .79 .79 .77
1 .88 .87 .86 .87 .85 .84 .83 .82 .82 .80 .80 .79 .78 .77 .77 .76
2 .85 .83 .81 .83 .82 .80 .81 .80 .79 .79 .78 .77 .77 .76 .75 .74
3 .82 .80 .78 .81 .79 .78 .79 .78 .77 .78 .77 .75 .76 .75 .74 .73
4 .80 .78 .76 .79 .77 .75 .78 .76 .74 .76 .75 .74 .75 .74 .73 .72
5 .78 .75 .73 .77 .75 .73 .76 .74 .72 .75 .73 .72 .74 .72 .71 .71
6 .76 .73 .72 .76 .73 .71 .75 .73 .71 .74 .72 .71 .73 .71 .70 .70
7 .74 .72 .70 .74 .72 .70 .73 .71 .69 .72 .70 .69 .72 .70 .69 .68
8 .72 .70 .68 .72 .70 .68 .71 .69 .68 .71 .69 .68 .70 .69 .67 .67
9 .71 .69 .67 .71 .69 .67 .70 .68 .67 .70 .68 .66 .69 .67 .66 .66
10 .70 .67 .65 .69 .67 .65 .69 .67 .65 .68 .66 .65 .68 .66 .65. .64
20% Floor Cavity Reflectance
Room Cavity Ratio
Calculite
®
Evolution Incandescent Open Downlight C4P30D
Page 2 of 2 4 1/2” Aperture PAR30 Reflector Trim
Candlepower Summary
Angle Mean CP Lumens
0 3308
5 3035 278
10 2259
15 1159 361
20 514
25 224 122
30 91
35 36 28
40 16
45 4 5
50 0
55 0 0
60 0
65 0 0
70 0
75 0 0
80 0
85 0 0
90 0
Zonal Lumens And Percentages
Zone Lumens % Lamp %Luminaire
0-30 760 73.82 95.86
0-40 788 76.54 99.39
0-60 793 77.01 100.00
0-90 793 77.01 100.00
40-90 4 .47 .61
60-90 0 .00 .00
90-180 0 .00 .00
0-180 793 77.01 100.00
** Efficiency = 77.0% **
Lightolier a Genlyte Thomas Company www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2003 Genlyte Thomas Group LLC (Lightolier Division) • A0303
Job Information Type:
CERTIFIED TEST REPORT NO. 2001FR
COMPUTED BY LSI PROGRAM **TEST-LITE**
CALCULITE 4 1/2" DIA. APERTURE OPEN DOWNLIGHT
CAT. # C4P30DCLP, SPECULAR CLEAR FINISH REFLECTOR
75W PAR30 FLOOD GE LAMP. LUMEN RATING = 1030 LMS.
  • Page 1 1
  • Page 2 2

Lightolier C4P30D User manual

Lightolier
Brand
Lightolier
Model
C4P30D
Category
Work lights
Type
User manual

Lightolier C4P30D is a 4 1/2" Aperture PAR30 Reflector Trim that is part of the Calculite® Evolution Incandescent Open Downlight series. It features a 16-gauge Alzak® aluminum trim with a 50° visual cutoff to lamp and lamp image. The trim is removable from below for bottom relamping and is available with either a painted white or polished flange. The reflector housing snaps into the frame for easy tool-less installation and provides friction spring clips to secure the aperture cone.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents