AWZ585
v1.1
LB2/1A/PTC
Fuse module
Edition: 3 from 12.02.2013
Supersedes the edition: 2 from 22.06.2012
1. Technical description.
The fuse module is intended for dividing power in low-voltage alarm systems (power distribution) that require
voltage within the range of: 10 V ÷ 30 V DC. It contains two power inputs: a screw connector and a DC 5,5/2,1 outlet and
two power outputs AUX1÷AUX2 which are independently secured with PTC 1A polymer fuses. An activation of the PTC
fuse is indicated by an appropriate LED going out: L1 for AUX1, L2 for AUX2. Additionally, each output is secured by
a varistor which protects the PSU and the receivers against surges in the power circuit.
Fig.1. Drawing of the module.
Fig.2. Electrical diagram.
Table 1. Description of components and
connectors of the PSU.
Table 2. Specifications.
Pulsar K.Bogusz Sp.j.
Siedlec 150, 32-744 Łapczyca, Polska
Tel. (+48) 14-610-19-40, Fax. (+48) 14-610-19-50
e-mail: [email protected], [email protected]
http:// www.pulsar.pl, www.zasilacze.pl
EN*
WEEE MARKING
According to the EU WEE Directive – It is required not to dispose of electric or electronic waste as unsorted municipal waste and to collect
such WEEE separately.
Element
no. [fig. 1]
Description
[1] L1, L2 green LEDs
[2]
F1, F2 fuses in the AUX (+)
circuits
[3]
AUX1, AUX2 independently
secured outputs,
common terminal COM (-)
[4]
DC 5,5/2,1 outlet – module’s
power input
[5]
Screw connector – module’s
power input
[6]
Mounting strip
Supply voltage
10 V÷ 30 V DC
Output voltage
U
AUX
= U
IN
(equal to supply voltage)
Current consumption
5 mA÷ 30 mA @ U
IN
= 10 V ÷ 30 V DC
Number of power inputs 2: a DC 5,5/2,1 outlet or a screw connector
Number of power outputs
2x 2 (AUX terminals)
Protections against:
- a short circuit SCP
- an overload OLP
- a surge
- 2 x 1A PTC
- 2 x 1A PTC
- varistors
LED indication
Green LEDs L1, L2 – AUX1÷AUX2 outputs
status
F1, F2 fuses
2 x 1A PTC
Operating conditions
II environmental class, -10°C ÷50°C
Dimensions
60 x 43 x 23 (WxHxD)
Fixing
a mounting tape with an adhesive tape
or dowel pins x2 (holes∅3mm)
Connectors:
- of power output
- of power input
- screw connectors Ф0,41÷1,63
(AWG 26-14)
- a DC 5,5/2,1 outlet or a screw connector
Ф0,41÷1,63 (AWG 26-14)
Net/gross weight
0,03kg / 0,05kg
WARRANTY
Pulsar K. Bogusz Sp.j. (the manufacturer) grants a two-year
warranty for the equipment, counted from the device’s production
date.
/