Pulsar SF116-CRB Operating instructions

Pulsar
Brand
Pulsar
Model
SF116-CRB
Category
Network switches
Type
Operating instructions

Pulsar SF116-CRB is a 16-port switch with a buffer power supply for 16 IP cameras and a recorder, offering uninterruptible power supply for both. It features PoE (Power over Ethernet) ports, allowing for network connectivity and reduced installation costs by eliminating the need for separate power cables. The switch supports auto-learning and auto-aging of MAC addresses, and provides LED indication for operation status. Its metal housing accommodates 4x17Ah/12V batteries and offers space for a recorder.

Pulsar SF116-CRB is a 16-port switch with a buffer power supply for 16 IP cameras and a recorder, offering uninterruptible power supply for both. It features PoE (Power over Ethernet) ports, allowing for network connectivity and reduced installation costs by eliminating the need for separate power cables. The switch supports auto-learning and auto-aging of MAC addresses, and provides LED indication for operation status. Its metal housing accommodates 4x17Ah/12V batteries and offers space for a recorder.

SF116-CRB v.1.0/II
SF116-CRB 16-ports switch with buffer power supply
and recorder, with recorder space.
for 16 IP cameras
CODE
TYPE
:
:
DESCRIPTION
The SF116-CRB is a complete solution for uninterruptible power supply of 16 IP cameras 52VDC power supply
and uninterruptible power supply of the DVR (12VDC power supply). The enclosure has a battery compartment for
4x17Ah/12V batteries (connected in series) and a recorder.
The main elements of this system include:
- 16 ports PoE switch
our batteries (4 x 17Ah/12V, connected in series), 54 VDC uninterruptible power supply unit
- 12VDC (DC/DC50HV) buck converter (DVR power supply)
In case of power decay, a battery back-up is activated immediately.
The approximate backup time is given assuming that all output ports are used (using typical devices and 17Ah
batteries). The electricity consumption for own needs and the energy efficiency of the power intake track were taken into
account. The exact description of how to perform the calculations can be found at:
.
Automatic detection of any devices powered in the PoE standard is enabled at the 1 – 16 ports of the switch. The
G1/TP, G2/TP ports is used for connection of another network device via RJ45 connector. The switch is fitted with SFP
slots; the use of fiber optic module (GBIC) allows fiber optic transmission. The LEDs at the front panel indicate the
operation status.
The switch is housed in a metal enclosure (color RAL 9003) which can accommodate 4x17Ah/12V battery. The
enclosure features a micro switch tamper indicating door opening (front panel). The SF116-CRB is fitted with two LEDs on
the front panel (red LED – indicates 230VAC power supply of the PSU, green LED indicates the presence of DC voltage).
The PoE technology ensures a network connection and reduces installation costs by eliminating the need to
supply a separate power cable for each device. This method allows supplying other network devices, such as IP
phone, wireless access point or router.
- f
"Approximate backup time -
assumptions for calculations"
EN**
wyjście TAMPER : przewody 30cm
Tel. +48-14-610-19-40, fax: +48-14- 610-19-50, www.pulsar.pl, e-mail: [email protected]
SF116-CRB 16-ports switch with buffer power supply for 16 IP cameras
and recorder, with recorder space
Features:
· PoE uninterruptible power supply of 16 IP cameras
· uninterruptible power supply of the recorder (12VDC)
· Switch 16 ports
16 PoE ports 10/100Mb/s, (1÷16 ports) (data and
power supply)
2 port 10/100/1000Mb/s (G1/TP, G2/TP2 ports)
2 porty 10/100/1000Mb/s SFP (G1/SFP, G2/SFP ports)
· 15,4W for each PoE port, supports devices complaint
with the IEEE802.3af standard
· Approximate backup time: 4h 03min
· LED indication
· Metal housing - color white RAL 9003, which
can accommodate 4x 17Ah/12V batteries
and offers the possibility of recorder
installation
· Supports auto-learning and auto-aging of
MAC addresses (1K size)
· Space for a recorder with the following
dimensions max. 400×345×80 W×H×D
· warranty – 2 year from the production date
Pulsar
®
W
H
D
W
1
H
1
D
1
Recorder space
W x H
2 2
D
2
wyjście TAMPER : przewody 30cm
Tel. +48-14-610-19-40, fax: +48-14- 610-19-50, www.pulsar.pl, e-mail: [email protected]
PARAMETERS OF THE SWITCH
Ports
16 x PoE (10/100Mb/s) (RJ-45)
2 x UPLINK (10/100/1000Mb/s) (RJ-45)
2 x UPLINK (10/100/1000Mb/s) (SFP)
with connection speed auto-negotiation and MDI/MDIX Auto Cross)
PoE power supply
IEEE 802.3af (1÷16 ports), 54V DC / 15,4W at each port *
Used pairs 4/5 (+), 7/8 (-)
Protocols, Standards
IEEE802.3, 802.3u, 802.3x CSMA/CD, TCP/IP
Forwarding rate
10BASE-T: 14880pps/port
100BASE-TX: 148800pps/port
Bandwidth
1,6Gbps
Transmission method
Store-and-Forward
Optical indication of
operation
Switch power supply;
Link/Act;
PoE Status
Mains supply
176÷264V AC
Current up to
1,5A@230VAC max.
Supply power
267W
Output current at the PoE ports (RJ45)
16 x 0,2A ΣI=3,2A (max.)
Output voltage at the PoE ports (RJ45)
44÷54VDC
Power supply output current of the recorder
4A
Power supply output voltage of the recorder
12VDC
Battery charge current
0,5A max. (+/-5%)
Approximate backup time
4h 03min
Short-circuit protection SCP and overload
protection OLP
electronic, automatic recovery
PSU current consumption
0,25A
Battery circuit protection SCP and reverse
polarity connection
melting fuse
Deep discharge battery protection UVP
U<38V (± 5%) – disconnect of connection battery
* The given value of 15,4W per port is the maximum value. The total power consumption should not exceed 192W when all PoE ports
are being used.
ELECTRICAL PARAMETERS
MECHANICAL PARAMETERS
Dimensions
The dimensions of the recorder
compartment
The dimensions of the battery
compartment
Gross/Net weight
Enclosure
Closing
Warranty
Connectors
SF116-CRB 16-ports switch with buffer power supply for 16 IP cameras
and recorder, with recorder space
Pulsar
®
  • Page 1 1
  • Page 2 2

Pulsar SF116-CRB Operating instructions

Pulsar
Brand
Pulsar
Model
SF116-CRB
Category
Network switches
Type
Operating instructions

Pulsar SF116-CRB is a 16-port switch with a buffer power supply for 16 IP cameras and a recorder, offering uninterruptible power supply for both. It features PoE (Power over Ethernet) ports, allowing for network connectivity and reduced installation costs by eliminating the need for separate power cables. The switch supports auto-learning and auto-aging of MAC addresses, and provides LED indication for operation status. Its metal housing accommodates 4x17Ah/12V batteries and offers space for a recorder.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers