MULTIPLEX Condensation Fan Installation guide

Brand: MULTIPLEX

Model: Condensation Fan

Type: Installation guide

Part No. 020000138

Revision 0

Condensation Fan Installation Instructions MD Series

Figure

Installation Instructions

1. Remove Splash Panel and Merchandiser.

2. Locate fan (A), above the valve cap (B).

If the machine has more than 10 valves

you will need to install two fans as the

larger machines have two flex manifolds

(D). (See Figures 1 & 3).

3. Center the fan (A) above the Flex

Manifold (D), and or (Manifolds) as the

application requires. (See Figure 3).

4. Raise fan (A) approximately ½” from its

resting position above the Valve Cap (B).

(See figures 1 & 3)

5. Install the fan (A) using the two #8 x ½

self-drilling screws with the external tooth

lock washers provided in the kit at

location (C). (See figures 1 & 2).

6. To connect the fan. Remove the black

wire connection from switch (E). (See

figure 4). Connect black fan wire with the

piggyback faston to the switch (E), then

attach the earlier removed switch wires to

the piggyback now connected to the

switch (E). When two fans are required

you will need to connect the black wire to

the second fan to the switch on the other

ice chute.

7. To connect the white wire, remove the

white wire connection from the timer (F).

(See figure 4). Connect the white fan wire

with piggyback faston to this timer

position. Now connect the removed timer

wires to the piggyback faston of the white

fan wire. When two fans are required the

white wire from the second fan will still

be piggybacked on the timer where the

other fan wire is connected.

8. Use the wire clip (G), provided in the kit

to secure the fan wires. (See figure 4).

A B

Figure

Bill of Material for High Condensation Fan Kit, #020000133 is as follows:

1. 020000134 - Fan, Hi-Condensation, Assy. Qty. 1 per kit.

2. 020000138 – Installation Instruction Sheet. Qty. 1 per kit.

3. 0901430 – Screw, #8 x ½ Self Drilling, Qty. 2 per each fan installed.

4. 0901915 – Washer, Star #8, Qty. 2 per each fan installed.

5. 0905403 – Wire Clip, Qty. 1 per each fan installed.

(Two kits required in applications where two fans are needed.)

Figure

MULTIPLEX Condensation Fan Installation guide

MULTIPLEX Condensation Fan Installation guide

MULTIPLEX Condensation Fan Installation guide

Other documents