Chevrolet Venture Owner's manual

Seats and Restraint Systems

........................... 1-1

Front Seats

............................................... 1-3

Rear Seats

............................................... 1-6

Safety Belts

............................................. 1-30

Child Restraints

....................................... 1-57

Air Bag Systems

...................................... 1-94

Restraint System Check

.......................... 1-103

Features and Controls

..................................... 2-1

Keys

........................................................ 2-3

Doors and Locks

....................................... 2-9

Windows

................................................. 2-24

Theft-Deterrent Systems

............................ 2-27

Starting and Operating Your Vehicle

........... 2-32

Mirrors

.................................................... 2-45

OnStar

®

System

...................................... 2-46

HomeLink

®

Transmitter

............................. 2-47

Storage Areas

......................................... 2-51

Vehicle Personalization

............................. 2-60

Instrument Panel

............................................. 3-1

Instrument Panel Overview

.......................... 3-4

Climate Controls

...................................... 3-26

Warning Lights, Gages and Indicators

......... 3-36

Message Center

....................................... 3-50

Driver Information Center (DIC)

.................. 3-57

Audio System(s)

....................................... 3-60

Driving Your Vehicle

....................................... 4-1

Your Driving, the Road, and Your Vehicle

..... 4-2

Towing

................................................... 4-33

Service and Appearance Care

.......................... 5-1

Service

..................................................... 5-3

Fuel

......................................................... 5-4

Checking Things Under the Hood

................. 5-9

All-Wheel Drive

........................................ 5-51

Bulb Replacement

.................................... 5-52

Windshield Wiper Blade Replacement

......... 5-59

Tires

...................................................... 5-61

Appearance Care

..................................... 5-96

Vehicle Identiﬁcation

............................... 5-105

Electrical System

.................................... 5-106

Capacities and Speciﬁcations

................... 5-113

Maintenance Schedule

..................................... 6-1

Maintenance Schedule

................................ 6-2

Customer Assistance and Information

.............. 7-1

Customer Assistance and Information

........... 7-2

Reporting Safety Defects

........................... 7-12

Index

................................................................ 1

2004 Chevrolet Venture Owner Manual M

GENERAL MOTORS, GM, the GM Emblem,

CHEVROLET, the CHEVROLET Emblem and the name

VENTURE are registered trademarks of General

Motors Corporation.

This manual includes the latest information at the time it

was printed. We reserve the right to make changes

after that time without further notice. For vehicles ﬁrst

sold in Canada, substitute the name “General Motors of

Canada Limited” for Chevrolet Motor Division whenever

it appears in this manual.

Please keep this manual in your vehicle, so it will be

there if you ever need it when you’re on the road. If you

sell the vehicle, please leave this manual in it so the

new owner can use it.

Litho in U.S.A.

Part No. 10336276 A First Edition

©

Copyright General Motors Corporation 06/20/03

Canadian Owners

You can obtain a French copy of this manual from your

dealer or from:

Helm, Incorporated

P.O. Box 07130

Detroit, MI 48207

How to Use This Manual

Many people read their owner’s manual from beginning

to end when they ﬁrst receive their new vehicle. If

you do this, it will help you learn about the features and

controls for your vehicle. In this manual, you will ﬁnd

that pictures and words work together to explain things.

Index

A good place to look for what you need is the Index in

back of the manual. It is an alphabetical list of what

is in the manual, and the page number where you will

ﬁnd it.

ii

Safety Warnings and Symbols

You will ﬁnd a number of safety cautions in this book.

We use a box and the word CAUTION to tell you about

things that could hurt you if you were to ignore the

warning.

{CAUTION:

These mean there is something that could hurt

you or other people.

In the caution area, we tell you what the hazard is.

Then we tell you what to do to help avoid or reduce the

hazard. Please read these cautions. If you don’t, you

or others could be hurt.

You will also ﬁnd a circle

with a slash through it in

this book. This safety

symbol means “Don’t,”

“Don’t do this” or “Don’t let

this happen.”

iii

Vehicle Damage Warnings

Also, in this book you will ﬁnd these notices:

Notice: These mean there is something that could

damage your vehicle.

A notice will tell you about something that can damage

your vehicle. Many times, this damage would not be

covered by your warranty, and it could be costly. But the

notice will tell you what to do to help avoid the damage.

When you read other manuals, you might see CAUTION

and NOTICE warnings in different colors or in different

words.

You’ll also see warning labels on your vehicle. They use

the same words, CAUTION or NOTICE.

Vehicle Symbols

Your vehicle has components and labels that use

symbols instead of text. Symbols, used on your vehicle,

are shown along with the text describing the operation

or information relating to a speciﬁc component, control,

message, gage or indicator.

If you need help ﬁguring out a speciﬁc name of a

component, gage or indicator, reference the following

topics:

• Seats and Restraint Systems in Section 1

• Features and Controls in Section 2

• Instrument Panel Overview in Section 3

• Climate Controls in Section 3

• Warning Lights, Gages and Indicators in Section 3

• Audio System(s) in Section 3

• Engine Compartment Overview in Section 5

iv

These are some examples of symbols you may ﬁnd on your vehicle:

v

✍ NOTES

vi

Front Seats ......................................................1-3

Manual Seats ................................................1-3

Six-Way Power Seats .....................................1-4

Reclining Seatbacks ........................................1-4

Head Restraints .............................................1-6

Rear Seats .......................................................1-6

Rear Seat Operation .......................................1-6

Second Row Safety Belt Stowage .....................1-6

Flip and Fold Feature .....................................1-7

Split Bench Seats ...........................................1-8

Bucket Seats ...............................................1-15

Captain Chairs .............................................1-21

Stowable Seat ..............................................1-26

Safety Belts ...................................................1-30

Safety Belts: They Are for Everyone ................1-30

Questions and Answers About Safety Belts ......1-34

How to Wear Safety Belts Properly .................1-35

Driver Position ..............................................1-36

Safety Belt Use During Pregnancy ..................1-45

Right Front Passenger Position .......................1-46

Center Passenger Position

(Bucket Seat) ............................................1-46

Center Passenger Position

(Bench Seat) ............................................1-48

Rear Seat Passengers ..................................1-50

Rear Safety Belt Comfort Guides for Children

and Small Adults .......................................1-53

Safety Belt Pretensioners ...............................1-56

Safety Belt Extender .....................................1-56

Child Restraints .............................................1-57

Older Children ..............................................1-57

Infants and Young Children ............................1-59

Child Restraint Systems .................................1-63

Where to Put the Restraint .............................1-66

Top Strap ....................................................1-66

Top Strap Anchor Location .............................1-68

Lower Anchorages and Top Tethers for

Children (LATCH System) ...........................1-70

Securing a Child Restraint Designed for the

LATCH System (Rear) ...............................1-72

Securing a Child Restraint in a Rear Outside

Seat Position ............................................1-72

Securing a Child Restraint in a Center Seat

Position

(Third Row Bench Seat) .............................1-76

Section 1 Seats and Restraint Systems

1-1

Securing a Child Restraint in a Center Seat

Position (Bucket Seat) ................................1-78

Securing a Child Restraint in the Right Front

Seat Position ............................................1-80

Built-In Child Restraint ...................................1-83

Air Bag Systems ............................................1-94

Where Are the Air Bags? ...............................1-97

When Should an Air Bag Inﬂate? ....................1-99

What Makes an Air Bag Inﬂate? ....................1-100

How Does an Air Bag Restrain? ...................1-100

What Will You See After an Air Bag Inﬂates? .....1-101

Servicing Your Air Bag-Equipped Vehicle ........1-103

Restraint System Check ................................1-103

Checking Your Restraint Systems ..................1-103

Replacing Restraint System Parts After

a Crash ..................................................1-104

Section 1 Seats and Restraint Systems

1-2

Front Seats

Manual Seats

Use the lever located on

the front of the seat to

adjust the seat forward or

rearward. Pull up the lever

to unlock the seat. Slide the

seat to where you want it

and release the lever.

{CAUTION:

You can lose control of the vehicle if you try to

adjust a manual driver’s seat while the vehicle

is moving. The sudden movement could startle

and confuse you, or make you push a pedal

when you don’t want to. Adjust the driver’s

seat only when the vehicle is not moving.

To make sure the seat is locked into place, try to move

the seat back and forth with your body.

1-3

Six-Way Power Seats

Your vehicle may have this

feature. If it does, the

six-way power seat control

is located on the outboard

sides of the driver’s and

front passenger’s seats.

• Move the front of the control up or down to adjust the

front portion of the cushion up or down.

• Move the rear of the control up or down to adjust the

rear portion of the cushion up or down.

• Lift up or push down on the whole control to move

the entire seat up or down.

• To move the whole seat forward or rearward, slide

the control forward or rearward.

Reclining Seatbacks

1-4

To adjust a seatback, pull up on the lever located on

the outboard side of the driver’s or front passenger’s

seats. Release the lever to lock the seatback where you

want it. Push and pull on the seat to make sure it’s

locked into position. Pull up on the lever, and the seat

will go to its original upright position.

But don’t have a seatback reclined if your vehicle is

moving.

{CAUTION:

Sitting in a reclined position when your vehicle

is in motion can be dangerous. Even if you

buckle up, your safety belts can’t do their job

when you’re reclined like this.

The shoulder belt can’t do its job because it

won’t be against your body. Instead, it will be

in front of you. In a crash you could go into it,

receiving neck or other injuries.

The lap belt can’t do its job either. In a crash

the belt could go up over your abdomen. The

belt forces would be there, not at your pelvic

bones. This could cause serious internal

injuries.

For proper protection when the vehicle is in

motion, have the seatback upright. Then sit

well back in the seat and wear your safety belt

properly.

1-5

Head Restraints

Adjust your head restraint so that the top of the restraint

is closest to the top of your head. This position

reduces the chance of a neck injury in a crash.

Head restraints are ﬁxed on some models and

adjustable on others. To adjust a head restraint,

slide it up or down.

Rear Seats

Rear Seat Operation

The rear seats in your vehicle have levers and straps

used to adjust, remove, and reinstall the seats. By using

the levers and straps in the correct order, you can

easily remove the seats from the vehicle.

When you put the seats back in the vehicle, follow the

label on the back of the seat for proper location.

Second Row Safety Belt Stowage

If your vehicle has a split bench seat in the second row,

use the clip on the safety belt to secure the belt after

it is disconnected from the mini-buckle. When removing

the second row split bench seat, secure the loose

end of the safety belt in this clip. This will keep the

safety belt from dangling and possibly striking

something.

Do not have the second row outside safety belt stored if

someone is sitting in the second row outside position.

1-6

Flip and Fold Feature

The rear seats in your vehicle can be folded forward.

Use this feature for exiting and entering third row seats.

1. If the seats have the adjustable head restraints,

push them fully down.

2. Fold the seatback ﬂat

on the seat, by either

pulling on the nylon

strap on the rear of the

seat or lifting up on

the lever located on the

front of the seatback.

If the seat adjusts, slide

it all the way back.

3. Release the rear set of

hooks from the ﬂoor

pins by pulling the

nylon strap located at

the base of the

seat; hang on to the

strap as the seat folds

forward.

To return the seat(s) to the normal position, do the

following:

1. Push the seat back and ﬁrmly push the rear hooks

onto the rear ﬂoor pins by pushing down on the

rear of the seat.

2. Try to raise the seat to check that it is locked down.

3. Lift the seatback recliner lever or pull the nylon

strap on the back of the seat and raise the

seatback until it locks upright.

4. Push and pull on the seatback to check that it is

locked.

1-7

Split Bench Seats

If you have the split bench seat (50/50 or 40/60), the

seatbacks can be folded forward or reclined individually

and the seats can be removed individually. The

second row (40/60) sections can also be adjusted

forward or rearward individually.

The second row (40/60) split bench may be equipped

with a built-in child restraint. See Built-In Child Restraint

on page 1-83.

Adjusting the Split Bench Seats

(Second Row)

The second row bench seats are adjustable. There are

two adjustment levers on each section of the split

bench seats to adjust the seat forward or rearward.

One is located below the center, in the front of each

section of the split bench.

1-8

The other lever is located

on the rear of the seat.

Lift up either lever and slide the seat forward or

rearward. Release the lever. Push and pull on the seat

to make sure it is locked into place.

Folding or Reclining the Seatbacks

{CAUTION:

If the seatback isn’t locked, it could move

forward in a sudden stop or crash. That could

cause injury to the person sitting there. Always

press rearward on the seatback to be sure it is

locked.

The seatbacks on each section of the split bench seat

can be either folded forward or reclined. The following

explains how to use the nylon strap or recliner lever

to fold or recline the seatbacks.

1-9

To fold the seatback forward, pull the nylon strap

located on the rear of the seat or lift up on the recliner

lever located on the front of the seatback. The

seatback will lock into place.

To raise a seatback, pull the nylon strap or lift the

recliner lever while raising the seatback until it locks

upright. Push and pull on the seatback to check that it is

locked into place.

To recline the seatback, pull the nylon strap or lift the

recliner lever. Press back on the seatback until you

reach the desired position then let go of the strap

or lever.

To return the seatback to an upright position, pull on the

nylon strap or lift the recliner lever without putting any

pressure on the seatback. Push and pull on the

seatback to be sure it is locked into place.

Removing the Split Bench Seat

Make sure the seatback is in the upright position.

1. For the second row split bench, with the seatback

in the upright position, unhook the side attachment

for the safety belt. This mini-buckle is located

on the right side of the seat.

2. Push the red center of

the buckle with a small

pointed object to

remove the seat belt, if

needed.

3. Lift the seatback recliner lever or pull the nylon

strap on the back of the seat to fold the seatback

forward.

Nylon Strap

Recliner Lever

1-10

4. If the seat is in the second row, lift one of the

adjustment levers and slide the seat fully rearward.

5. From behind the bench seat, pull the nylon strap at

the center of the base of the seat to release the

rear latches from the ﬂoor pins.

Do not let go of the strap until the seat is folded all

the way forward.

6. To unlatch the front latches, squeeze the angled

bar toward the straight crossbar.

7. Remove the seat by rocking it slightly forward,

then toward the rear of the vehicle and then

pulling it out.

Repeat these steps for the other section of the split

bench seat.

1-11

Replacing the Split Bench Seats

{CAUTION:

If the seatback isn’t locked, it could move

forward in a sudden stop or crash. That could

cause injury to the person sitting there. Always

press rearward on the seatback to be sure it is

locked.

{CAUTION:

A seat that isn’t locked into place properly can

move around in a collision or sudden stop.

People in the vehicle could be injured. Be sure

to lock the seat into place properly when

installing it.

{CAUTION:

A safety belt that is improperly routed, not

properly attached, or twisted won’t provide the

protection needed in a crash. The person

wearing the belt could be seriously injured.

After installing the seat, always check to be

sure that the safety belts are properly routed

and attached, and are not twisted.

Make sure the seatback is in the upright position and

the safety belts are on the correct section of the seat.

Don’t put the sections of the bench seat in so they face

rearward because they won’t latch that way. If you

want more storage room behind the second row seat,

adjust each section by sliding it forward.

The split bench seats have seat position labels, located

on the back of each seat, showing where the seat

must go. Follow that diagram.

The seat must be placed in the proper location for the

legs to attach correctly.

Make sure the seat is in the full rear position before

beginning this procedure.

1-12

1. Squeeze the angled bar toward the solid crossbar

while placing the front hooks of the bench seat onto

the front two ﬂoor pins.

2. Make sure the bench

seat is angled so that

the front hooks

clear the ﬂoor pins.

If the front legs are not attached correctly, the rear

legs will not attach to the rear set of ﬂoor pins.

1-13

If the front latches are not attaching correctly, check

that the seat is in the full rear position.

3. Firmly push the rear hooks onto the rear ﬂoor pins

by pushing down on the rear of the seat.

4. Try to raise the seat to check that it is locked down.

5. Lift the seatback recliner lever or pull the nylon

strap on the back of the seat and raise the

seatback until it locks upright.

6. Push and pull on the seatback to check that it is

locked.

7. If you have the 40/60 seat, attach the mini-buckle

so that the safety belt is ready for use when a

passenger uses the seat.

The buckle reattaches by pushing the latch into the

buckle until the red center pops out again.

Repeat these steps for the other section of the split

bench seat.

1-14

Page is loading ...

Chevrolet Venture Owner's manual

This manual is also suitable for

Chevrolet Venture Owner's manual