AEG F88082M0P User manual

FAVORIT 88082 W0P

FAVORIT 88082 M0P

NL Gebruiksaanwijzing 2

EN User manual 19

FR Notice d'utilisation 35

DE Benutzerinformation 53

Page is loading ...

CONTENTS

1. SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

2. PRODUCT DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

3. CONTROL PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

4. PROGRAMMES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

5. OPTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

6. BEFORE FIRST USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

7. DAILY USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

8. HINTS AND TIPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

9. CARE AND CLEANING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

10. TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

11. TECHNICAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

FOR PERFECT RESULTS

Thank you for choosing this AEG product. We have created it to give you impeccable

performance for many years, with innovative technologies that help make life simpler –

features you might not find on ordinary appliances. Please spend a few minutes reading to get

the very best from it.

Visit our website for:

Get usage advice, brochures, trouble shooter, service information:

www.aeg.com

Register your product for better service:

www.aeg.com/productregistration

Buy Accessories, Consumables and Original spare parts for your appliance:

www.aeg.com/shop

CUSTOMER CARE AND SERVICE

We recommend the use of original spare parts.

When contacting Service, ensure that you have the following data available.

The information can be found on the rating plate. Model, PNC, Serial Number.

Warning / Caution-Safety information

General information and tips

Environmental information

Subject to change without notice.

ENGLISH 19

1.

SAFETY INSTRUCTIONS

Before the installation and use of the ap-

pliance, carefully read the supplied in-

structions. The manufacturer is not re-

sponsible if an incorrect installation and

use causes injuries and damages. Always

keep the instructions with the appliance

for future reference.

1.1 Children and vulnerable

people safety

WARNING!

Risk of suffocation, injury or per-

manent disability.

• Do not let persons, children included,

with reduced physical sensory, re-

duced mental functions or lack of ex-

perience and knowledge use the ap-

pliance. They must have supervision or

instruction for the operation of the ap-

pliance by a person who is responsible

for their safety.

• Do not let children play with the appli-

ance.

• Keep all packaging away from chil-

dren.

• Keep all detergents away from chil-

dren.

• Keep children and pets away from the

appliance door when it is open.

1.2 Installation

• Remove all the packaging.

• Do not install or use a damaged appli-

ance.

• Do not install or use the appliance

where the temperature is less than 0

°C.

• Obey the installation instruction sup-

plied with the appliance.

Electrical connection

WARNING!

Risk of fire and electrical shock.

• The appliance must be earthed.

• Make sure that the electrical informa-

tion on the rating plate agrees with

the power supply. If not, contact an

electrician.

• Always use a correctly installed shock-

proof socket.

• Do not use multi-plug adapters and

extension cables.

• Make sure not to cause damage to the

mains plug and to the mains cable.

Should the appliance power supply

cable need to be replaced, this must

be carried out by our Service Centre.

• Connect the mains plug to the mains

socket only at the end of the installa-

tion. Make sure that there is access to

the mains plug after the installation.

• Do not pull the mains cable to discon-

nect the appliance. Always pull the

mains plug.

• Do not touch the mains cable or the

mains plug with wet hands.

• This appliance complies with the

E.E.C. Directives.

Water connection

• Make sure not to cause damage to the

water hoses.

• Before you connect the appliance to

new pipes or pipes not used for a long

time, let the water flow until it is clean.

• The first time you use the appliance,

make sure that there is no leakage.

• The water inlet hose has a safety valve

and a sheath with an inner mains ca-

ble.

WARNING!

Dangerous voltage.

• If the water inlet hose is damaged, im-

mediately disconnect the mains plug

20

www.aeg.com

from the mains socket. Contact the

Service to replace the water inlet hose.

1.3 Use

• This appliance is intended to be used

in household and similar applications

such as:

– Staff kitchen areas in shops, offices

and other working environments

– Farm houses

– By clients in hotels, motels and oth-

er residential type environments

– Bed and breakfast type environ-

ments.

WARNING!

Risk of injury, burns, electrical

shock or fire.

• Do not change the specification of this

appliance.

• Put knives and cutlery with sharp

points in the cutlery basket with the

points down or in a horizontal posi-

tion.

• Do not keep the appliance door open

without supervision to prevent to fall

on it.

• Do not sit or stand on the open door.

• Dishwasher detergents are dangerous.

Obey the safety instructions on the

detergent packaging.

• Do not drink and play with the water in

the appliance.

• Do not remove the dishes from the

appliance until the programme is

completed. There can be detergent

on the dishes.

• The appliance can release hot steam if

you open the door while a programme

operates.

• Do not put flammable products or

items that are wet with flammable

products in, near or on the appliance.

• Do not use water spray and steam to

clean the appliance.

1.4 Disposal

WARNING!

Risk of injury or suffocation.

• Disconnect the appliance from the

mains supply.

• Cut off the mains cable and discard it.

• Remove the door catch to prevent

children and pets to get closed in the

appliance.

ENGLISH 21

2. PRODUCT DESCRIPTION

1

2

3

4

5

6

9

11

7

8

13

10

12

1

Worktop

2

Top spray arm

3

Upper spray arm

4

Lower spray arm

5

Filters

6

Rating plate

7

Salt container

8

Water hardness dial

9

Rinse aid dispenser

10

Detergent dispenser

11

Cutlery basket

12

Lower basket

13

Upper basket

22

www.aeg.com

3. CONTROL PANEL

1

2 3

4

5

6

8 7

Delay

Option

AUTO

AU TO

SENSE

SE NS E

45°-70°

Extra

SILENT

SI LE NT

50°

Quick

30MIN

60°

ECO

50°

PRO

PR O

70°

45°

ProZone

30

M

IN

AUT

O

PR

O

S

ILEN

T

Program

Option

Delay

Start

1

On/off button

2

Program touchpad

3

Programme indicators

4

Display

5

Delay touchpad

6

Option touchpad

7

Indicators

8

Start touchpad

Indicators Description

Rinse aid indicator. It is always off while the programme oper-

ates.

Salt indicator. It is always off while the programme operates.

Washing phase indicator. It comes on when the washing phase

operates.

Rinsing phase indicator. It comes on when the rinsing phases

operate.

Drying phase indicator. It comes on when the drying phase op-

erates.

AutoOpen indicator.

TimeSaver indicator.

Delay indicator.

ExtraHygiene indicator.

Multitab indicator.

ENGLISH 23

4. PROGRAMMES

Programme Degree of soil

Type of load

Programme

phases

Options

1)

All

Crockery, cutlery,

pots and pans

Prewash

Wash from 45 °C to

70 °C

Rinses

Dry

ExtraHygiene

2)

Heavy soil

Crockery, cutlery,

pots and pans

Prewash

Wash 70 °C

Rinses

Dry

TimeSaver

3)

Normal soil

Crockery and cut-

lery

Prewash

Wash 50 °C

Rinses

Dry

4)

Fresh soil

Crockery and cut-

lery

Wash 60 °C

Rinse

ExtraHygiene

5)

Normal soil

Crockery and cut-

lery

Prewash

Wash 50 °C

Rinses

Dry

ExtraHygiene

6)

TimeSaver

7)

AutoOpen

8)

Mixed soil

Crockery, cutlery,

pots and pans

Prewash

Wash 70 °C

Rinses

Dry

TimeSaver

Normal or light soil

Delicate crockery

and glassware

Wash 45 °C

Rinses

Dry

9)

All Prewash

1)

The appliance senses the degree of soil and the quantity of items in the baskets. It

automatically adjusts the temperature and quantity of the water, the energy

consumption and the programme duration.

2)

This programme has a high temperature rinsing phase for better hygiene results. During

the rinsing phase, the temperature stays at 70 °C for at least 10 minutes.

3)

This is the most silent programme. The pump works at a very low speed to decrease the

level of noise. Because of the low speed, the programme duration is long.

4)

With this programme you can wash a load with fresh soil. It gives good washing results

in a short time.

5)

With this programme you have the most efficient use of water and energy consumption

for crockery and cutlery with normal soil. (This is the standard programme for test

institutes).

6)

It is not possible to set ExtraHygiene if AutoOpen is active. Deactivate AutoOpen.

7)

It is not possible to set TimeSaver if AutoOpen is active. Deactivate AutoOpen.

8)

With this programme you can wash a load with mixed soil. Very heavy soil in the lower

basket and normal soil in the upper basket. The water pressure and the water

temperature in the lower basket are higher than in the upper basket.

24

www.aeg.com

9)

Use this programme to quickly rinse the dishes. This prevents the remaining food to

bond on the dishes and bad odours to come out from the appliance.

Do not use detergent with this programme.

Consumption values

Programme

1)

Duration

(min)

Energy

(kWh)

Water

(l)

40 - 150 0.6 - 1.4 7 - 14

150 - 160 1.4 - 1.6 13 - 15

200 - 220 1.1 - 1.2 9 - 11

30 0.8 9

195 0.82 10.2

130 - 140 1.3 - 1.5 14 - 15

70 - 80 0.8 - 0.9 11 - 12

14 0.1 4

1)

The pressure and the temperature of the water, the variations of the mains supply, the

options and the quantity of dishes can change the programme duration and the

consumption values.

Information for test institutes

For all the necessary information for test performance. send an email to:

info.test@dishwasher-production.com

Write down the product number (PNC) that is on the rating plate.

5. OPTIONS

Activate or deactivate the op-

tions before the start of a pro-

gramme. You cannot activate or

deactivate the options while a

programme operates.

If one or more options are set,

make sure that the related indi-

cators are on before the pro-

gramme starts.

5.1 TimeSaver

This option increases the pressure and

the temperature of the water. The wash-

ing and drying phases are shorter. The

total programme duration decreases by

approximately 50%.

The washing results are the same as with

the normal programme duration. The

drying results can decrease.

How to activate the TimeSaver option

1. Press Option until the TimeSaver in-

dicator comes on. In the display you

can see the update of the pro-

gramme duration.

• If the option is not applicable to

the programme, the related indica-

tor does not come on.

5.2 ExtraHygiene

With this function you have better hy-

giene results. During the rinsing phase,

the temperature stays at 70 °C for at

least 10 minutes.

ENGLISH 25

How to activate the ExtraHygiene

option

1. Press Option until the ExtraHygiene

indicator comes on. In the display

you can see the update of the pro-

gramme duration.

• If the option is not applicable to

the programme, the related indica-

tor does not come on.

5.3 Multitab

Activate this option only when you use

the combi detergent tablets.

This option deactivates the use of rinse

aid and salt. The related indicators stay

off.

The programme duration can increase.

How to activate the Multitab option

1. Press the on/off button to activate

the appliance.

2. Press Option until the Multitab indi-

cator comes on.

The option stays on until you deactivate

it. Press Option until the Multitab indica-

tor goes off.

If you stop to use the combi

detergent tablets, before you start to

use separately detergent, rinse aid

and dishwasher salt, do these steps:

1. Deactivate the Multitab option.

2. Set the water softener to the highest

level.

3. Make sure that the salt container and

the rinse aid dispenser are full.

4. Start the shortest programme with a

rinsing phase, without detergent and

without dishes.

5. Adjust the water softener to the wa-

ter hardness in your area.

6. Adjust the released quantity of rinse

aid.

5.4 AutoOpen

This option gives good drying results

with less energy consumption.

This option is automatically activated

when you set the programme

.

The AutoOpen indicator comes on.

It is not possible to set this option with

other programmes.

• While the drying phase operates, a

device opens the appliance door and

keeps it ajar.

• At the end of the programme, the de-

vice and the appliance door retract.

The appliance automatically deacti-

vates.

CAUTION!

Do not try to close the appliance

door while the device keeps the

door ajar. This can cause dam-

age to the appliance.

If you want to deactivate the AutoOpen

option, press Option until the related in-

dicator goes off.

In this condition, the energy consump-

tion of the programme increases.

6. BEFORE FIRST USE

1. Make sure that the set level of the

water softener agrees with the water

hardness in your area. If not, adjust

the water softener. Contact your local

water authority to know the water

hardness in your area.

26

www.aeg.com

2. Fill the salt container.

3. Fill the rinse aid dispenser.

4. Open the water tap.

5. Processing residues can stay in the

appliance. Start a programme to re-

move them. Do not use detergent

and do not load the baskets.

If you use the combi detergent

tablets, activate the Multitab op-

tion.

6.1 Adjusting the water softener

Water hardness

Water softener

adjustment

German

degrees

(°dH)

French

degrees

(°fH)

mmol/l Clarke

degrees

Manual Elec-

tronic

51 - 70 91 - 125 9.1 - 12.5 64 - 88

2

1)

10

43 - 50 76 - 90 7.6 - 9.0 53 - 63

2

1)

9

37 - 42 65 - 75 6.5 - 7.5 46 - 52

2

1)

8

29 - 36 51 - 64 5.1 - 6.4 36 - 45

2

1)

7

23 - 28 40 - 50 4.0 - 5.0 28 - 35

2

1)

6

19 - 22 33 - 39 3.3 - 3.9 23 - 27

2

1)

5

1)

15 - 18 26 - 32 2.6 - 3.2 18 - 22 1 4

11 - 14 19 - 25 1.9 - 2.5 13 - 17 1 3

4 - 10 7 - 18 0.7 - 1.8 5 - 12 1 2

< 4 < 7 < 0.7 < 5

1

2)

1

2)

1)

Factory position.

2)

Do not use salt at this level.

You must adjust the water soft-

ener manually and electronically.

Manual adjustment

Turn the water hardness dial to the posi-

tion 1 or 2.

Electronic adjustment

1. Press the on/off button to activate

the appliance. Make sure that the ap-

pliance is in setting mode.

2. Press and hold, at the same time, De-

lay and Option until the indicators of

, and

start to flash.

3. Press Program,

•

The indicators of and

go off.

•

The indicator of

contin-

ues to flash.

ENGLISH 27

• The display shows the current set-

ting of the water softener. E.g.

= level 5.

4. Press Program again and again to

change the setting.

5. Press the on/off button to deactivate

the appliance and to confirm the set-

ting.

6.2 Filling the salt container

1.

Turn the cap counterclockwise and

open the salt container.

2.

Put 1 litre of water in the salt con-

tainer (only for the first time).

3.

Fill the salt container with dishwash-

er salt.

4.

Remove the salt around the opening

of the salt container.

5.

Turn the cap clockwise to close the

salt container.

CAUTION!

Water and salt can come out

from the salt container when you

fill it. Risk of corrosion. To pre-

vent it, after you fill the salt con-

tainer, start a programme.

6.3 Filling the rinse aid dispenser

M

A

X

1

2

3

4

+

-

A

B

D

C

1.

Press the release button (D) to open

the lid (C).

2.

Fill the rinse aid dispenser (A), no

more than the mark 'max'.

3.

Remove the spilled rinse aid with an

absorbent cloth to prevent too much

foam.

4.

Close the lid. Make sure that the re-

lease button locks into position.

You can turn the selector of the

released quantity (B) between

position 1 (lowest quantity) and

position 4 (highest quantity).

7. DAILY USE

1. Open the water tap.

2. Press the on/off button to activate

the appliance. Make sure that the ap-

pliance is in setting mode.

• If the salt indicator is on, fill the salt

container.

• If the rinse aid indicator is on, fill

the rinse aid dispenser.

28

www.aeg.com

3. Load the baskets.

4. Add the detergent.

5. Set and start the correct programme

for the type of load and the degree

of soil.

7.1 Using the detergent

20

30

M

A

X

1

2

3

4

+

-

A

B

C

1.

Press the release button (B) to open

the lid (C).

2.

Put the detergent in the compart-

ment (A) .

3.

If the programme has a prewash

phase, put a small quantity of deter-

gent on the inner part of the appli-

ance door.

4.

If you use detergent tablets, put the

tablet in the compartment (A).

5.

Close the lid. Make sure that the re-

lease button locks into position.

7.2 Setting and starting a

programme

Setting mode

For some settings it is necessary that the

appliance is in setting mode.

Press the on/off button to activate the

appliance. The appliance is in setting

mode when all the programme indica-

tors come on and the display shows 2

horizontal status bars. If the control pan-

el does not show this condition, press

and hold, at the same time Delay and

Option until the appliance is in setting

mode.

Starting a programme without

delay start

1. Open the water tap.

2. Press the on/off button to activate

the appliance. Make sure that the ap-

pliance is in setting mode.

3. Close the appliance door.

4. Press Program again and again until

the indicator of the programme you

want to set comes on. You can also

set the applicable options.

• The duration of the programme

flashes in the display.

• The indicators of the phases that

are foreseen for the programme

come on.

5. Press Start to start the programme.

• When the programme starts, only

the indicator of the running phase

stays on.

• The programme duration starts to

decrease with steps of 1 minute.

Starting a programme with

delay start

1. Set the programme.

2. Press Delay again and again until the

display shows the delay time you

want to set (from 1 to 24 hours).

• The Delay indicator comes on.

• The delay time flashes in the dis-

play.

• The indicators of the phases that

are foreseen for the programme

go off.

When the countdown is completed, the

programme starts. The indicator of the

running phase comes on.

Opening the door while the

appliance operates

If you open the door, the appliance

stops. When you close the door, the ap-

pliance continues from the point of inter-

ruption.

ENGLISH 29

Cancelling the delay start

while the countdown operates

When you cancel the delay start, also the

programme is cancelled.

1. Press and hold, at the same time, De-

lay and Option until all the pro-

gramme indicators come on and the

display shows 2 horizontal status

bars.

2. Set the programme again.

Cancelling the programme

1. Press and hold, at the same time, De-

lay and Option until all the pro-

gramme indicators come on and the

display shows 2 horizontal status

bars.

Make sure that there is detergent

in the detergent dispenser be-

fore you start a new programme.

At the end of the programme

The display shows 0.

1. Press the on/off button to deactivate

the appliance.

2. Close the water tap.

If you do not press the on/off

button, the AUTO OFF function

automatically deactivates the ap-

pliance a few minutes after the

end of the programme.

This helps to decrease the ener-

gy consumption,

Important

• Let the dishes become cold before

you remove them from the appliance.

Hot dishes can be easily damaged.

• First remove the items from the lower

basket, then from the upper basket.

• There can be water on the sides and

on the door of the appliance. Stainless

steel becomes cool more quickly than

the dishes.

8. HINTS AND TIPS

8.1 The water softener

Hard water contains a high quantity of

minerals that can cause damage to the

appliance and bad washing results. The

water softener neutralises these miner-

als.

The dishwasher salt keeps the water

softener clean and in good conditions. It

is important to set the right level of the

water softener. This makes sure that the

water softener uses the correct quantity

of dishwasher salt and water.

8.2 Using salt, rinse aid and

detergent

• Only use salt, rinse aid and detergent

for dishwasher. Other products can

cause damage to the appliance.

• The rinse aid helps, during the last

rinsing phase, to dry the dishes with-

out streaks and stains.

• Combi detergent tablets contain de-

tergent, rinse aid and other added

agents. Be sure that these tablets are

applicable to the water hardness in

your area. Refer to the instructions on

the packaging of the products.

If you want to use these tablets out of

the applicable water hardness, you

must also use dishwasher salt. First ac-

tivate the Multitab option, then adjust

the water softener to the water hard-

ness in your area and use dishwasher

salt.

• Detergent tablets do not fully dissolve

with short programmes. To prevent

detergent residues on the tableware,

we recommend that you use the tab-

lets with long programmes.

Do not use more than the correct

quantity of detergent. Refer to

the instructions on the detergent

packaging.

30

www.aeg.com

8.3 Loading the baskets

Refer to the supplied leaflet with

examples of the load of the bas-

kets.

• Only use the appliance to wash items

that are dishwasher-safe.

• Do not put in the appliance items

made of wood, horn, aluminium, pew-

ter and copper.

• Do not put in the appliance items that

can absorb water (sponges, household

cloths).

• Remove remaining food from the

items.

• To remove easily remaining burned

food, soak pots and pans in water be-

fore you put them in the appliance.

• Put hollow items (cups, glasses and

pans) with the opening down.

• Make sure that cutlery and dishes do

not bond together. Mix spoons with

other cutlery.

• Make sure that glasses do not touch

other glasses.

• Put the small items in the cutlery bas-

ket.

• Put the light items in the upper bas-

ket. Make sure that they do not move.

• Make sure that the spray arms can

move freely before you start a pro-

gramme.

8.4 Before starting a

programme

Make sure that:

• The filters are clean and correctly in-

stalled.

• The spray arms are not clogged.

• The position of the items in the bas-

kets is correct.

• The programme is applicable for the

type of load and for the degree of soil.

• The correct quantity of detergent is

used.

• There is dishwasher salt and rinse aid

(unless you use combi detergent tab-

lets).

• The cap of the salt container is tight.

9. CARE AND CLEANING

WARNING!

Before maintenance, deactivate

the appliance and disconnect the

mains plug from the mains sock-

et.

Dirty filters and clogged spray

arms decrease the washing re-

sults.

Make a check regularly and, if

necessary, clean them.

9.1 Cleaning the filters

A

B

C

1.

Turn the filter (A) counterclockwise

and remove it.

ENGLISH 31

A1

A2

2.

To disassemble the filter (A), pull

apart (A1) and (A2).

3.

Remove the filter (B).

4.

Wash the filters with water.

5.

Put the filter (B) to its initial position.

Make sure that it assembles correct-

ly under the two guides (C).

6.

Assemble the filter (A) and put it in-

to position in filter (B). Turn it clock-

wise until it locks.

An incorrect position of the filters

can cause bad washing results

and damage to the appliance.

9.2 Cleaning the spray arms

Do not remove the spray arms.

If the holes in the spray arms are clog-

ged, remove remaining parts of soil with

a thin pointed object.

9.3 External cleaning

Clean the appliance with a moist soft

cloth.

Only use neutral detergents. Do not use

abrasive products, abrasive cleaning

pads or solvents.

10. TROUBLESHOOTING

The appliance does not start or it stops

during operation.

Before you contact the Service, refer to

the information that follows for a solu-

tion to the problem.

With some problems, the display

shows an alarm code:

•

- The appliance does not fill with

water.

•

- The appliance does not drain

the water.

•

- The anti-flood device is on.

WARNING!

Deactivate the appliance before

you do the checks.

Problem Possible solution

You cannot activate the appli-

ance.

Make sure that the mains plug is connected

to the mains socket.

Make sure that there is not a damaged fuse

in the fuse box.

32

www.aeg.com

Problem Possible solution

The programme does not start. Make sure that the appliance door is closed.

Press Start.

If the delay start is set, cancel the setting or

wait for the end of the countdown.

The appliance does not fill with

water.

Make sure that the water tap is open.

Make sure that the pressure of the water

supply is not too low. For this information,

contact your local water authority.

Make sure that the water tap is not clogged.

Make sure that the filter in the inlet hose is

not clogged.

Make sure that the inlet hose has no kinks or

bends.

The appliance does not drain

the water.

Make sure that the sink spigot is not clog-

ged.

Make sure that the drain hose has no kinks

or bends.

The anti-flood device is on. Close the water tap and contact the Service.

After the checks are completed, activate

the appliance. The programme contin-

ues from the point of interruption.

If the problem occurs again, contact the

Service.

If the display shows other alarm codes,

contact the Service.

10.1 If the washing and drying

results are not satisfactory

Whitish streaks or bluish layers on

glasses and dishes

• The released quantity of rinse aid is

too much. Adjust the rinse aid selector

to a lower position.

• The quantity of detergent is too much.

Stains and dry water drops on glasses

and dishes

• The released quantity of rinse aid is

not sufficient. Adjust the rinse aid se-

lector to a higher position.

• The quality of the detergent can be

the cause.

Dishes are wet

• The programme is without a drying

phase or with a low temperature dry-

ing phase.

• The rinse aid dispenser is empty.

• The quality of the rinse aid can be the

cause.

• The quality of the combi detergent

tablets can be the cause. Try a differ-

ent brand or activate the rinse aid dis-

penser and use rinse aid together with

the combi detergent tablets.

Refer to ‘HINTS AND TIPS’ for

other possible causes.

10.2 How to activate the rinse

aid dispenser

The activation of the rinse aid dispenser

can occur only with the Multitab option

activated.

1. Press the on/off button to activate

the appliance. Make sure that the ap-

pliance is in setting mode.

2. Press and hold, at the same time, De-

lay and Option until the indicators of

ENGLISH 33

, and

start to flash.

3. Press Start .

•

The indicators of

and

go off.

•

The indicator continues to

flash.

• The display shows the current set-

ting.

Rinse aid dis-

penser off

Rinse aid dis-

penser on

4. Press Start to change the setting.

5. Press the on/off button to deactivate

the appliance and to confirm the set-

ting.

6. Adjust the released quantity of rinse

aid.

7. Fill the rinse aid dispenser.

11. TECHNICAL INFORMATION

Dimensions Width / Height / Depth

(mm)

596 / 850 / 610

Electrical connection Refer to the rating plate.

Voltage 220-240 V

Frequency 50 Hz

Water supply pressure Min. / max. (bar / MPa) (0.5 / 0.05 ) / (8 / 0.8 )

Water supply

1)

Cold water or hot water

2)

max. 60 °C

Capacity Place settings 12

Power consumption Left-on mode 0.10 W

Off-mode 0.10 W

1)

Connect the water inlet hose to a water tap with a 3/4'' thread.

2)

If the hot water comes from alternative sources of energy, (e.g. solar panels, aeolian

energy), use the hot water supply to decrease energy consumption.

12. ENVIRONMENT CONCERNS

Recycle the materials with the

symbol

. Put the packaging in

applicable containers to recycle it.

Help protect the environment and

human health and to recycle waste

of electrical and electronic

appliances. Do not dispose

appliances marked with the symbol

with the household waste. Return the

product to your local recycling

facility or contact your municipal

office.

34

www.aeg.com

Page is loading ...

www.aeg.com/shop

117914610-A-362012

AEG F88082M0P User manual

This manual is also suitable for

AEG F88082M0P User manual

in other languages

Related papers

Other documents