Hama 00049250 Owner's manual

Brand: Hama

Model: 00049250

Category: Interface cards/adapters

Type: Owner's manual

00049250/06.07

All listed brands are trademarks of the corresponding companies. Errors and omissions excepted,

and subject to technical changes. Our general terms of delivery and payment are applied.

P O Box 80 · 86651 Monheim/Germany

Phone: +49 9091 502-0

Fax: +49 9091 502-458

[email protected]

http://www.hama.com

00049250bda.indd 2

27.07.2007 12:04:24 Uhr

Page is loading ...

Installing Hardware:

You must open your computer to install the

card. Ensure that you have unplugged your

computer from the power supply. If you are

not familiar with the internal layout of your

computer, please consult the manual of your

computer or ask an expert.

1. Switch off all connected devices and your

computer.

2. Unplug your PC from the power supply

before beginning installation.

3. Open the cover of your computer.

Note: Static electricity can damage both

the card and your computer. Discharge

yourself by touching a metal object.

4. Select a free PCI slot. Remove the cover

plate for this slot. Keep the screw – you

will need it to secure the card.

5. Hold the card at the edge of the board and

insert it into the free PCI slot. Carefully

press the card into the slot until the holding

bracket is lined up with the casing and the

gold-plated contacts have disappeared

within the slot.

6. Secure the card using the slot plate screw

you removed earlier.

7. Close the case of your computer and plug it

in to the power supply again.

8. Restart your computer.

Installation of the drivers under Windows

2000/XP and Vista:

The drivers are installed automatically when

restarting your computer. If the card has been

correctly installed, the entry for ‘PCMCIA

Adapter’ in the Device Manager will appear

without a yellow exclamation mark.

Installing Drivers for Windows Me:

After you have restarted your PC, it should

automatically recognise your PCI – PC card

converter. The Driver Assistant requests

a driver for “Ricoh rL5C475(II) CardBus

Controller“. Next select Automatic search for

a better driver (Recommended) -> Next. After

the driver has been installed, click=> Finish

to complete the installation process. Restart

your system. You can check whether the

card was correctly integrated in the system

in the Device Manager. The entry “PCMCIA

Adapter” should now appear without a yellow

exclamation mark.

Driver Installation on Windows 98 SE:

After you have restarted your PC, it should

automatically recognize the card and search

for a driver for “Ricoh RL5C475(II) CardBus

Controller“. Click -> Next to proceed. In the

next window, select Automatic search for

a better driver (Recommended) -> Next. ->

Next Click on => Next and Windows will ﬁ nd

the driver under “C:\WINDOWS\INF\PCM-

CIA.INF“ => Next. The PC Card (PCMCIA)

Assistant will now open. Read through the

Assistant Information carefully and select

the option that best suits your system. If you

are not sure which option is most suitable

for your PC, select the standard option. Click

Finish -> Restart your system. You can check

whether the PC card adapter was correctly

integrated in the system in the Device Mana-

ger. The entry “PCMCIA Adapter” should now

appear without a yellow exclamation mark.

Operating Instruction

Card

Slot-metal

00049250bda.indd Abs1:4

27.07.2007 12:04:27 Uhr

Inserting a PC card in the PCI – PC Card

card:

Note: For some PC card/PCMCIA products it

is possible that the corresponding software

and the driver will need to be installed before

the card is inserted. For further informa-

tion, consult your PC card/PCMCIA card

handbook.

Start your PC. Once Windows has started,

you can insert the PC card/PCMCIA card into

a free slot on the back of your PC. After it has

been inserted, Windows should automatically

recognise the card and continue with the

driver installation. Once all drivers have been

installed, the LEDs on the rear of the card will

display the PC card/PCMCIA card’s operating

voltage.

Red: 5V Green: 3.3V

Removing a PC card from the PCI – PC Card

card:

Click on the “Remove Hardware Safely“

symbol in the Information section/ system

tray located in the bottom right-hand corner

of your desktop. Select the corresponding

PC card/PCMCIA card and click => Finish.

Press the eject lever on the rear of the card

and remove the PC card / PCMCIA card from

the slot.

Support and contact information

If products are defective:

Please contact your dealer or Hama Product

Consulting if you have any product claims.

Internet / World Wide Web:

Product support, new drivers or product

information can be found at www.hama.com

Support Hotline – Hama Product Consulting:

Tel. +49 (0) 9091 / 502-115

Fax +49 (0) 9091 / 502-272

E-mail: [email protected]

Safety instructions

• The device is suitable for indoor use only,

not for outdoor use.

• Do not open the device casing.

• Keep the device away from sources of heat.

• Do not operate the device in damp or dusty

environments.

00049250bda.indd Abs1:5

27.07.2007 12:04:28 Uhr

Page is loading ...

Hama 00049250 Owner's manual

Brand: Hama

Model: 00049250

Category: Interface cards/adapters

Type: Owner's manual

Download PDF

report

in other languages

français: Hama 00049250 Le manuel du propriétaire
Deutsch: Hama 00049250 Bedienungsanleitung

Hama 00049250 Owner's manual

Hama 00049250 Owner's manual

in other languages

Related papers

Other documents