Toughpower XT series Toughpower XT series
5. Product Features
- High quality Japanese made capacitors: provide superb
performance and reliability.
- S.P.Tindicator: indicates standby, PG signal and temperature
status of the power supply.
- FanDelayCool: FDC cooling function can be selected to adjust the
amount of time the cooling fans keep running after system shutdown
which effectively cools down parts and hardware inside the PSU and
PC case.
- 12Vin1 rail: powerful single +12V rail provides the best
compatibility for latest components.
- Gold-plated connectors for superior conductivity.
- Meets 80 PLUS efficiency requirement: Eco-design for less
heat and lower energy bills.
- TT5Years Warranty: Thermaltake quality 5-years parts and
labor warranty.
- 14cm ball bearing cooling fan with Japanese made 8mm
bearing system.
- Modular Cable Management: improves internal airflow and
reduces system clutter. (W0227 / W0229 /W0230 Models)
- Compliance with Intel ATX 12V 2.3 & SSI EPS 12V 2.92 standards.
- Supports dual 8-pin PCI-E & dual 6-pin PCI-E connectors for next
generation graphic cards.
- Guaranteed to deliver stable continuous output at 50°C environment.
- Universal AC input 100V~240V and Active PFC (PF value up to 99%).
- DIMENSION: 5.9"(W) x 3.4"(H) x 6.3"(L);150mm(W) x 86mm(H) x
160mm(L)
6. S.P.Tindicator & FanDelayCool
S.P.Tindicator
- The way to survey power supply status
All Toughpower XT Series power
supplies are equipped with
Thermaltake's new S.P.Tindicator
function. S.P.Tindicator enables
the user to check the power supply
status themselves by viewing the
standby, PG signal and temperature
LED. Under abnormal situations, the S.P.Tindicator will display
red colors to warn the user and protect your system.
S.P.Tindicator
PSU Status
Standby
PG Signal
Temperature
LED
Green Light
OFF
Green Light
Red Light
Green Light
Red Light
Information
1. Power supply and system in normal operation
2. Power supply off in standby mode. PSU output +5VSB
only. System turn off without unplug the power cord
and the PSU power switch still set to "I" position
+5VSB output abnormal
Power supply works without problem
Faulty power supply unit
Not over 100 C at secondary side of the power
supply unit
°
Over 100 at secondary side of the power supply unit°C
**When is a red color, we suggested you turn off your system and perform a
system check. If the power supply still displays a "red" LED after the system check, then please
contact your local distributor, Thermaltakeˇs branch office or Thermaltake's headquarters
service department.
S.P.Tindicator
05 06
250x176mm250x176mm250x176mm250x176mm250x176mm250x176mm250x176mm250x176mm250x176mm250x176mm250x176mm250x176mm250x176mm250x176mm250x176mm250x176mm250x176mm250x176mm250x176mm250x176mm250x176mm250x176mm250x176mm250x176mm250x176mm250x176mm250x176mm250x176mm250x176mm250x176mm250x176mm250x176mm250x176mm250x176mm250x176mm250x176mm250x176mm250x176mm250x176mm250x176mm250x176mm250x176mm250x176mm250x176mm250x176mm250x176mm250x176mm250x176mm250x176mm250x176mm250x176mm250x176mm250x176mm250x176mm250x176mm250x176mm250x176mm250x176mm250x176mm250x176mm250x176mm