LG Electronics WM2688H*MA User manual

Brand: LG Electronics

Model: WM2688H*MA

Category: Washing machines

Type: User manual

Designed specially to use only

HE (High-Efﬁciency) detergent

Diseñada especíﬁcamente para

usar con el detergente tipo HE

(Alta eﬁciencia)

To contact LG Electronics, 24 hours a day,

7 days a week:

1-800-243-0000

Or visit us on the Web at: us.lge.com

Número telefónico de LG Electronics, las 24

horas del día, 7 días a la semana:

1-800-243-0000

O visítenos en la Web en: us.lge.com

Before beginning installation, read these

instructions carefully. This wll simplify installation

and ensure that the washer is installed correctly

and safely. Leave these instructions near the

washer after installation for future reference.

US ER ’S G UI DE &

IN STALLATI ON I NS TRUCTIONS

Antes de comenzar la instalación, lea atentamente estas

instrucciones. Esto simpliﬁcará la instalación y asegurará

que la lavadora está instalada en forma correcta y segura.

Conserve estas instrucciones cerca de la lavadora luego

de la instalación para futuras consultas.

Model/Modelo

WM2688H*MA

STEAM WA S H E R

GU ÍA D EL U SUAR IO E

IN ST RUC CI ON ES D E IN STA LACIÓN

STEAM WA S H E R

LAVA D O R A

Protocol P172

Sanitization Performance of Residential and

Commercial, Family Sized Clothes Washers

Protocolo P172

Ejecucion de Saneamiento en la zona

residencial y comercial, lavodoras del uso del hogar

I M P O RTA N T S A F E T Y I N S T R U C T I O N S

Congratulations on your purchase

and welcome to the LG family.

Your new LG Steam Washer™

combines the most advanced

washing technology with simple

operation and high efficiency.

By following the operating and care

instructions in this manual, your

washer will provide you with many

years of reliable service.

THANK YOU!

I N T RO D U C T I O N

wWARNING For your safety, the information in this manual must be

followed to minimize the risk of ﬁre or explosion, electric shock, or to prevent

property damage, personal injury, or loss of life.

Your Safety and the safety of others is very important.

We have provided many important safety messages in this manual and on your appliance. Always read

and obey all safety messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word DANGER or WARNING.

These words mean:

wDANGER: You can be killed or seriously injured if you don’t immediately follow instructions.

wWARNING: You can be killed or seriously injured if you don’t follow instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of

injury, and tell you what can happen if the instructions are not followed.

INSTALLATION INSTRUCTIONS

Choose the Proper Location .................................. 9

Clearances ............................................................. 9

Flooring ................................................................ 10

Installations With Optional Pedestal Base

or Stacking Kit ...................................................... 10

Unpacking and Removing Shipping Bolts ........... 11

Connecting the Water Lines ................................. 12

Connecting the Drain Line .................................... 13

Leveling the Washer ............................................. 14

HOW TO USE

Sorting Wash Loads ............................................. 15

Selecting Detergent .............................................. 16

About the Dispenser ............................................. 16

Loading the Dispenser ......................................... 17

Control Panel Features ......................................... 18

Cycle Guide .......................................................... 19

The LCD Display ................................................... 20

Operating the Washer .......................................... 21

Steam Cycles ....................................................... 22

Cycle Setting Buttons .......................................... 23

Cycle Option Buttons .......................................... 24

Special Functions ................................................. 24

PARTS AND FEATURES

Special Features ..................................................... 7

Key Parts and Components ................................... 8

TROUBLESHOOTING

Normal Sounds You May Hear ............................. 30

Before Calling for Service ............................... 30–32

CARE AND CLEANING

Regular Cleaning .................................................. 26

Cleaning the Washer ............................................ 27

Maintenance ................................................... 28–29

SPECIFICATIONS/OPTIONAL ACCESSORIES

IMPORTANT SAFETY INSTRUCTIONS

Basic Safety Precautions .................................. 3–6

Key Dimensions and Speciﬁcations ..................... 33

Optional Accessories ........................................... 33

WARRANTY ................................................... 35

Product Registration Information

Model:

Serial Number:

Date of Purchase:

The model and serial number can be located on

the rating plate on the front of the washer.

READ ALL INSTRUCTIONS BEFORE USE

• Before use, the washer must be properly installed as

described in this manual.

• Do not wash articles that have been previously

cleaned in, washed in, soaked in, or spotted with

gasoline, dry cleaning solvents, or other ﬂammable

or explosive substances, as they give off vapors that

could ignite or explode.

• Do not add gasoline, dry cleaning solvents, or other

ﬂammable or explosive substances to the wash

water. These substances give off vapors that could

ignite or explode.

• Under certain conditions, hydrogen gas may be

produced in a hot water system that has not been

used for 2 weeks or more. HYDROGEN GAS IS

EXPLOSIVE. If the hot water system has not been

used for such a period, before using the washer,

turn on all hot water faucets and let the water ﬂow

from each for several minutes. This will release any

accumulated hydrogen gas. As the gas is ﬂammable,

do not smoke or use an open ﬂame during this time.

• Do not allow children to play on or in the washer.

Close supervision of children is necessary when the

washer is used near children.

• Before the washer is removed from service or

discarded, remove the door to prevent children from

climbing inside.

• Do not install or store the washer where it will be

exposed to the weather or freezing temperatures.

• Do not tamper with controls.

• Do not repair or replace any part of the washer or

attempt any servicing other than as described in this

manual. We strongly recommend that any service be

performed by a qualiﬁed individual.

• See Installation Instructions for grounding

requirements.

• ALWAYS follow the fabric care instructions

supplied by the garment manufacturer.

• Do not place items exposed to cooking oil in your

washer. Items contaminated with cooking oils may

contribute to a chemical reaction that could cause a

load to catch ﬁre.

• Use fabric softeners or products to eliminate static

only as recommended by the manufacturer.

• This washer is not designed for maritime use or for

mobile installations such as in RVs, aircraft, etc.

• Turn off the water taps and unplug the washer if

the machine is to be left for an extended period of

time, such as during vacations.

• Packaging material can be dangerous for children.

There is a risk of suffocation! Keep all packaging

from children.

• Always check the inside of the washer for foreign

objects before loading laundry. Keep the door closed

when not in use.

wWARNING: To reduce the risk of fire, electric shock, or injury to persons when using this

appliance, follow basic precautions, including the following.

BASIC SAFETY PRECAUTIONS

wWARNING For your safety, the information in this manual must be

followed to minimize the risk of ﬁre or explosion, electric shock, or to prevent

property damage, personal injury, or loss of life.

READ ALL INSTRUCTIONS BEFORE USE

• Refer to INSTALLATION INSTRUCTIONS for

detailed grounding procedures. Installation

instructions are packed in the washer for installer

’

reference. If the washer is moved to a new location,

have it checked and reinstalled by a qualiﬁed service

person. Failure to follow this warning can cause

serious injury, ﬁre, electrical shock, or death.

• Do not, under any circumstances cut or remove

the third (ground) prong from the power cord.

Failure to follow this warning can cause serious

injury, ﬁre, electrical shock, or death.

• For personal safety, this appliance must be

properly grounded. Failure to follow this warning

can cause serious injury, ﬁre, electrical shock,

or death.

• The power cord of this appliance is equipped

with a 3-prong (grounding) plug which mates

with a standard 3-prong (grounding) wall outlet to

minimize the possibillty of electric shock hazard from

this appliance.

• This washer must be plugged into a 120VAC, 60Hz

grounded outlet. Failure to follow this warning can

cause serious injury, ﬁre, electrical shock, or death.

• Have the wall outlet and circuit checked by a

qualiﬁed electrician to make sure the outlet is

properly grounded. Failure to follow this warning

can cause serious injury, ﬁre, electrical shock,

or death.

• Where a standard 2-prong wall outlet is

encountered, it is your personal responsibility

and obligation to have it replaced with a properly

grounded 3-prong wall outlet. Failure to follow

this warning can cause serious injury, ﬁre, electrical

shock, or death.

• Do not install on carpet. Install washer on a solid

ﬂoor. Failure to follow this warning can cause serious

leak damage.

• Do not remove ground prong. Do not use an

adapter or extension cord. Plug into a grounded

3-prong outlet. Failure to follow these warnings can

cause serious injury, ﬁre, electrical shock, or death.

• The washer should always be plugged into

its own individual electrical outlet which has a

voltage rating that matches the rating plate. This

provides the best performance and also prevents

overloading house wiring circuits which could cause

a ﬁre hazard from overheated wires.

• Never unplug your washer by pulling on the

power cord. Always grip plug ﬁrmly and pull straight

out from the outlet. Failure to follow this warning can

cause serious injury, ﬁre, electrical shock, or death.

• Repair or replace immediately all power cords

that have become frayed or otherwise damaged.

Do not use a cord that shows cracks or abrasion

damage along its length or at either end. Failure

to follow this warning can cause serious injury, ﬁre,

electrical shock, or death.

• When installing or moving the washer, be careful

not to pinch, crush, or damage the power cord.

Failure to follow this warning can cause serious

injury, ﬁre, electrical shock, or death.

• The washer must be installed and electrically

grounded by a qualiﬁed service person in

accordance with local codes to prevent shock

hazard and assure stability during operation.

• Washer is heavy. Two or more people may be

needed to install and move the appliance. Failure

to do so can result in back or other injury.

• Store and install the washer where it will not

be exposed to temperatures below freezing or

exposed to outdoor weather conditions. Failure to

follow this warning can cause serious leak damage.

• Do not install the washer in humid spaces to

reduce the risk of electric shock. Failure to follow

this warning can cause serious injury, ﬁre, electrical

shock, or death.

wWARNING: To reduce the risk of fire, electric shock, or injury to persons when using this

appliance, follow basic precautions, including the following.

SAFETY INSTRUCTIONS FOR INSTALLATION

wWARNING For your safety, the information in this manual must be

followed to minimize the risk of ﬁre or explosion, electric shock, or to prevent

property damage, personal injury, or loss of life.

READ ALL INSTRUCTIONS BEFORE USE

I M P O RTA N T S A F E T Y I N S T R U C T I O N SI M P O RTA N T S A F E T Y I N S T R U C T I O N S

GROUNDING INSTRUCTIONS

This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of

electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord

having an equipment-grounding conductor and grounding plug. The plug must be plugged into an appropriate

outlet that is properly installed and grounded in accordance with all local codes and ordinances.

wWARNING:

Improper connection of the equipment-grounding conductor can result in risk of electric shock. Check with a

qualiﬁed electrician or serviceman if you are in doubt as to whether the appliance is properly grounded. Do not

modify the plug provided with the appliance if it does not ﬁt the outlet, have a proper outlet installed by a qualiﬁed

electrician. Failure to follow these warnings can cause serious injury, ﬁ re, electrical shock or death.

I M P O RTA N T S A F E T Y I N S T R U C T I O N S

SAFETY INSTRUCTIONS FOR USE, CARE AND CLEANING, AND DISPOSAL

•

Unplug the washer before cleaning to avoid the

risk of electric shock.

•

Never use harsh chemicals, abrasive cleaners,

or solvents to clean the washer. They will

damage the ﬁnish.

•

Do not put oily or greasy rags or clothing on

top of the washer. These substances give off

vapors that could ignite the materials.

•

Do not wash items that are soiled with

vegetable or cooking oil. These items may

contain some oil after laundering. Due to the

remaining oil, the fabric may smoke or catch

ﬁre by itself.

•

Disconnect this appliance from the

power supply before attempting any user

maintenance. Turning the controls to the OFF

position does not disconnect this appliance

from the power supply. Failure to follow this

warning can cause serious injury, ﬁre, electrical

shock, or death.

•

Do not combine laundry products for use in

one load unless speciﬁed on the label.

•

Do not mix chlorine bleach with ammonia

or acids such as vinegar. Follow package

directions when using laundry products.

Incorrect usage can produce poisonous gas

resulting in serious injury or death.

•

Do not reach into the washer while parts are

moving. Before loading, unloading or adding

items, push in the cycle selector knob and

allow the drum to coast to a complete stop

before reaching inside. Failure to follow this

warning can cause serious injury, ﬁre, electrical

shock, or death.

•

Do not allow children to play on or in the

washer. Close supervision of children is

necessary when the washer is used near

children. As children grow, teach them the

proper, safe use of all appliances. Failure to

comply with these warnings could result in

serious personal injuries.

•

Destroy the carton, plastic bag and other

packing materials after the washer is

unpacked. Children might use them for play.

Cartons covered with rugs, bedspreads, or

plastic sheets can become airtight chambers.

Failure to comply with these warnings could result

in serious personal injuries or death.

•

Keep laundry products out of children’s reach.

To prevent personal injury, observe all warnings

on product labels. Failure to comply with these

warnings could result in serious personal injuries.

•

Remove the door to the washing compartment

to avoid the danger of children or small

animals getting trapped inside before your

washer is removed from service or discarded.

Failure to do so can result in serious personal

injury or death.

PA RT S A N D F E AT U R E S

SPECIAL FEATURES

DETERGENT DISPENSER DRAWER

This four-compartment drawer provides separate

dispensers for prewash and main wash detergent,

liquid bleach, and liquid fabric softener.

CONTROL PANEL LCD DISPLAY SCREEN

Simple electronic controls are user-friendly.

The LCD screen shows cycle options and cycle

information and displays status messages

during operation.

EASY-ACCESS LOCKING DOOR

Extra-large door locks during operation and

features a delay to prevent the door from being

opened until the washer interior has cooled and

the water level has lowered.

HIGH-EFFICIENCY STEAM CYCLES

During LG’s unique high-efficiency STEAM cycles,

the steam nozzle injects fabrics with hot steam to

gently remove tough stains.

ROLLERJETS

The RollerJet system enhances wash

performance while reducing fabric wear.

Integrated jets spray clothes to further improve

washing efficiency.

INTERIOR DRUM LIGHT

The drum light illuminates the washer interior for

greater visibility when loading and unloading.

The ultra long-life LED bulbs should never need

replacement.

DIRECT-DRIVE MOTOR

Direct-drive motor eliminates the belt and pulleys

found on most washers to provide improved

performance and reliability while increasing

energy efficiency.

wWARNING: To reduce the risk of fire, electric shock, or injury to persons when using this

appliance, follow basic precautions, including the following.

SAVE THESE INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USE

wWARNING For your safety, the information in this manual must be

followed to minimize the risk of ﬁre or explosion, electric shock, or to prevent

property damage, personal injury, or loss of life.

PA RT S A N D F E AT U R E S I N S TA L L AT I O N I N S T R U C T I O N S

CHOOSE THE PROPER LOCATION

CLEARANCES

Allow at least 24 in. (61.2 cm) in front of the

washer to open the door.

/4"

(75.6 cm)

(10 cm)

51"

(129.5 cm)

/4"

(54 cm)

To ensure sufficient clearance for water lines and

airflow, allow minimum clearances of at least

1 in. (2.5 cm) at the sides and 4 in. (10 cm)

behind the unit. Be sure to allow for wall, door,

or floor moldings that may increase the required

clearances.

• Do not remove ground prong. Do not use

an adapter or extension cord. Plug into a

grounded 3-prong outlet. Failure to follow this

warning can cause serious injury, ﬁre, electrical

shock, or death.

Power Outlet

• The power outlet must be within 60 in. (1.5 m) of

either side of the washer.

• The appliance and outlet must be positioned so

that the plug is easily accessible.

• Do not overload the outlet with more than one

appliance.

• The outlet must be grounded in accordance with

current wiring codes and regulations.

• Time-delay fuse or circuit breaker is

recommended.

NOTE: It is the personal responsibility and

obligation of the product owner to have a

proper outlet installed by a qualified electrician.

HIGH

WASHING

HIGHHOT/

COLD

STEAM

DOOR LOCK

EST. TIME:

REMANING

NORMAL

CHILD LOCKDELAY WASH

1:21

27"

(68.6 cm)

(2.5 cm)

Hot and Cold

Water Inlets

Drain

Hose

Rear of Washer

KEY PARTS AND COMPONENTS

In addition to the special features and

components outlined in the Special Features

section, there are several other important

components that are referenced in this manual.

ULTRA-CAPACITY STAINLESS STEEL DRUM

The ultra-large stainless steel drum offers extreme

durability and is tilted to improve efficiency and

allow easier access for large items.

WATER CIRCULATION AND STEAM

NOZZLES

The water circulation nozzles spray the water/

detergent solution directly onto garments for

super cleaning performance. During LG’s unique

high-efficiency STEAM cycles, the steam nozzle

injects fabrics with hot steam to gently remove

tough stains.

LEVELING FEET

Four leveling feet (two in the front and two in

the back) adjust to improve washer stability on

uneven floors.

DRAIN ACCESS PANEL

Provides access to the drain line and drain

pump filter.

PLC MODEM ACCESS PANEL

This panel covers the PLC modem and

should only be removed by a technician or

servicer, or when installing the optional

Remote Laundry Monitor (purchased separately).

wWARNING

• Washer is heavy! Two or more people

are required when moving and unpacking

the washer. Failure to do so can result in back

or other injury.

• Store and install the washer where it will not

be exposed to temperatures below freezing

or exposed to outdoor weather conditions.

Failure to follow this warning can cause serious

injury, ﬁre, electrical shock, or death.

• Properly ground washer to conform with all

governing codes and ordinances. Failure to

follow this warning can cause serious injury, ﬁre,

electrical shock, or death.

• To reduce the risk of electric shock, do not

install the washer in humid spaces. Failure to

follow this warning can cause serious injury, ﬁre,

electrical shock, or death.

• The base opening must not be obstructed by

carpeting when the washer is installed on a

carpeted ﬂoor.

Included Accessories

Hot and Cold

Water Hoses

Wrench

(for removing

shipping bolts and

adjusting leveling feet)

Tie Strap

(for securing

drain hose)

Elbow Bracket

(for securing

drain hose)

Caps (4)

(for covering

shipping bolt holes)

I N S TA L L AT I O N I N S T R U C T I O N S

FLOORING

I N S TA L L AT I O N I N S T R U C T I O N S

When removing the washer from the carton

base, be sure to remove the foam tub support in

the middle of the carton base.

If you must lay the washer down to remove the

base packaging materials, always lay it carefully

on its side. Do NOT lay the washer on its front

or back.

IMPORTANT: To prevent internal damage

during transport, the washer is equipped with

4 shipping bolts and plastic retainers. These

bolts and retainers MUST be removed before

operating the washer.

• Failure to remove shipping bolts and retainers

may cause severe vibration and noise, which can

lead to permanent damage to the washer. The

cord is secured to the back of the washer with

a shipping bolt to help prevent operation with

shipping bolts in place.

Remove the retainers by turning them slightly

while pulling. Rotate and press the hole caps

into the shipping bolt holes.

Starting with the bottom 2 shipping bolts,

use the included wrench to remove the

4 shipping bolts by turning them

counterclockwise.

Shipping

Bolts

NOTE: Save the bolts and retainers for

future use. To prevent damage to internal

components, the shipping bolts and

retainers must be installed when

transporting the washer.

NOTE: Please note that the floor must be strong

and rigid enough to support the weight of the

washer when fully loaded, without flexing or

bouncing. If your floor has too much flex in it,

you may need to reinforce it to make it more

rigid. A floor that is adequate for a top-loading

washer may not be rigid enough for a front-

loading washer, due to the difference in the spin

speed and direction. If the floor is not solid, your

washer may vibrate and you may hear and feel

the vibration throughout your house.

INSTALLATIONS WITH OPTIONAL

PEDESTAL BASE OR STACKING KIT

IMPORTANT: If you are installing your washer

using an optional pedestal base or stacking kit,

please refer to the instructions for your pedestal

or stacking kit before proceeding with the

installation.

Retainer

Hole Cap

(75.6 cm)

(10 cm)

HIGH

WASHING

HIGHHOT/

COLD

STEAM

DOOR LOCK

EST.TIME:

REMANING

NORMAL

CHILD LOCK DELAYWASH

1:21

27"

(68.6 cm)

(2.5 cm)

/2"

(190.5 cm)

Required Dimensions for Installation

With Pedestal

Required Dimensions for Installation

With Stacking Kit

Carton Base

Foam Tub

Support

• To minimize noise and vibration, the washer

MUST be installed on a solidly constructed ﬂoor.

See the NOTE at right.

• Allowable slope under the entire washer is

1° maximum.

• Carpeting and soft tile surfaces are not

recommended.

• Never install the washer on a platform or weakly

supported structure. Use only an approved

accessory pedestal as described below.

UNPACKING AND REMOVING SHIPPING BOLTS

I N S TA L L AT I O N I N S T R U C T I O N S I N S TA L L AT I O N I N S T R U C T I O N S

CONNECTING THE WATER LINES CONNECTING THE DRAIN LINE

Insert the end of the drain hose into the floor

drain. Secure the hose in place to prevent it

from moving.

Drain Hose

Floor Drain

Option 3: Floor Drain

Stand

Pipe

Tie Strap

Clip the end of the hose into the elbow bracket.

Insert the end of the drain hose into a standpipe.

Use tie strap to secure the drain hose in place.

NOTE: Total height of the hose end should not

exceed 96 in. (244.8 cm) from the bottom of the

washer.

Option 1: Standpipe

Elbow

Bracket

Drain

Hose

Clip the end of the hose into the elbow bracket.

Hang the end of the drain hose over the side of

the laundry tub. Use tie strap to secure the drain

hose in place.

NOTE: Total height of the hose end should not

exceed 96 in. (244.8 cm) from the bottom of the

washer.

Laundry

Tub

Option 2: Laundry Tub

Elbow

Bracket

Tie

Strap

Drain

Hose

Insert a rubber seal into the threaded

ﬁttings on each hose.

Rubber Seal

Water Hose

(to tap)

Rubber Seal

Water Hose

(to water inlet

on washer)

Attach the hot water line to the hot water

tap. Attach the cold water line to the cold

water tap.

Tighten the ﬁttings securely. Open the water

taps fully to check for leaks.

Water Tap

NOTE: Do not cross-thread the hose ﬁttings.

Attach the hot water line to the red hot water

inlet on the back of the washer. Attach the

cold water line to the blue cold water inlet on

the back of the washer. Tighten the fittings

securely.

Water

Inlets

• IMPORTANT: Use new hoses when installing

the washer. Do NOT reuse old hoses.

• IMPORTANT: Use ONLY the inlet hoses

provided by LG with this laundry product.

Aftermarket hoses are not guaranteed to ﬁt or

function correctly. Other hoses may not tighten

correctly and could cause leaks. Subsequent

damage to product or property will not be

covered under the terms of LG's warranty.

• Water supply pressure must be between

14.5 PSI and 116 PSI (100~800 kPa). If the

water supply pressure is more than 116 PSI, a

pressure reducing valve must be installed.

• Periodically check the hose for cracks, leaks,

and wear, and replace the hose if necessary.

• Make sure that the water lines are not stretched,

pinched, crushed, or kinked.

• The washer should never be installed or stored

in a location subject to freezing temperatures.

Damage to the water lines and internal

mechanisms of the washer can result. If the

washer was exposed to freezing temperatures

prior to installation, allow it to stand at room

temperature for several hours before use.

• The drain hose should always be properly

secured. Failure to properly secure the drain

hose can result in ﬂooding and property

damage.

• Do not install the end of the drain hose higher

than 96 in. (244.8 cm) above the bottom of the

washer.

• The drain must be installed in accordance with

any applicable local codes and regulations.

• Make sure that the water lines are not stretched,

pinched, crushed, or kinked.

I N S TA L L AT I O N I N S T R U C T I O N S

SORTING WASH LOADS

H O W TO U S E

LEVELING THE WASHER

Loosen the locknuts on all 4 leveling feet

until you can turn the feet with the included

wrench. Turn clockwise to raise the washer

or counterclockwise to lower it.

Once the washer is level from side to side

and front to back, tighten all locknuts

securely.

Make sure that all 4 leveling feet are in firm

contact with the floor.

NOTE: To make sure that the washer is

properly level, run the washer with a test

load: place approximately 6 pounds of

laundry in the machine. Then, press POWER,

press RINSE+SPIN, and then press the

START/PAUSE button. See the following

sections for additional information on cycle

selection and operation.

Verify that the washer does not rock or

vibrate excessively during the spin cycle.

If the washer vibrates or shakes, adjust

the leveling feet until the washer is stable

and retest.

Fabric Care Labels

Most articles of clothing feature fabric care labels

that include instructions for proper care.

Grouping Similar Items

For best results, sort clothes into loads that can

be washed with the same wash cycle.

Different fabrics have different care requirements.

Always wash dark colors separately from light

colors and whites to prevent discoloration. If

possible, do not wash heavily soiled items with

lightly soiled ones. The chart below shows

recommended groupings.

Bleach

symbols

Any bleach

(when needed)

Only non-chlorine bleach

(when needed)

Do not bleach

Machine

wash

cycle

Normal

Permanent press/

wrinkle resistant

Gentle/

delicate

Hand wash

Do not wash Do not wring

Water

temperature

Hot

(50°C/120°F)

Warm

(40°C/105°F)

Cold/cool

(30°C/85°F)

Fabric Care Labels

Sort Laundry...

by Colors by Soil by Fabric by Lint

Whites Heavy Delicates Lint Producer

Lights Normal Easy Care Lint Collector

Darks Light Sturdy

Loading the Washer

• Check all pockets to make sure that they

are empty. Items such as clips, matches,

pens, coins, and keys can damage both your

washer and your clothes.

• Close zippers, hooks, and drawstrings to

prevent these items from snagging or tangling

on other clothes.

• Pretreat heavily stained areas for best results.

• Combine large and small items in a load. Load

large items ﬁrst.

• Large items should not be more than half of the

total washload.

• The washer can be fully loaded, but the drum

should not be tightly packed with items. The

door of the washer should close easily.

• To prevent an out-of-balance load, do not wash

single items. Add one or two similar items to

the load. Large, bulky items, such as a blanket,

comforter, or bedspread should be washed

individually.

• Do not wash or spin waterproof clothes.

• When unloading the washer, check under the

door seal for small items.

Position the washer in the final location,

taking special care to not pinch, strain, or

crush the water and drain lines. Place a level

across the top of the washer.

Level

Leveling

Feet

Leveling

Feet

The drum of your new washer spins at very high

speeds, up to 1,320 RPM. To minimize vibration,

noise, and unwanted movement, the floor must

be a perfectly level, solid surface.

NOTE: Adjust the leveling feet only as far as

necessary to level the washer. Extending the

leveling feet more than necessary can cause

the washer to vibrate.

• All four leveling feet must rest solidly on the

ﬂoor. Rock the washer gently from corner to

corner to make sure that the washer does

not rock.

If you are installing the washer on the optional

pedestal, you must use the leveling feet on

the pedestal to level the washer. The washer’s

leveling feet should be fully retracted and locked

into position with the locknuts.

Raise

Lower

Tighten all 4

locknuts securely

H O W TO U S E

SELECTING DETERGENT

ABOUT THE DISPENSER

The automatic dispenser consists of four

compartments which hold:

• Liquid chlorine bleach.

• Liquid fabric softener.

• Liquid or powdered detergent for prewash.

• Liquid or powdered detergent and color-safe

bleach for main wash.

All laundry products can be added at once in

their respective dispenser compartments. They

will be dispensed at the appropriate time for the

most effective cleaning.

After adding the laundry products to the

dispenser, close the dispenser drawer.

To add detergent, bleach, and fabric softener to

the automatic dispenser:

Open the dispenser drawer.

Load the laundry products into the

appropriate compartments.

Slowly close the dispenser drawer to

avoid early dispensing of the laundry

products.

NOTE: It is normal for a small amount of water to

remain in the dispenser compartments at the end

of the cycle.

Liquid Chlorine

Bleach

Compartment

Liquid Fabric

Softener

Compartment

Prewash

Detergent

Compartment

Main Wash Detergent

Compartment

Liquid

Detergent

Cup

Insert

LOADING THE DISPENSER

H O W TO U S E

Prewash Detergent Compartment

Add liquid or powered detergent to this

compartment to automatically dispense when

using the Prewash option. Always use HE (High-

Efficiency) detergent with your Steam Washer™.

• The amount of detergent added for the Prewash

option is 1/2 the amount recommended for the

main wash cycle. For example, if the main wash

cycle requires one cup of detergent, add 1/2

cup for the Prewash option.

Main Wash Detergent Compartment

This compartment holds laundry detergent

for the main wash cycle, which is added to

the load at the beginning of the cycle. Always

use HE (High-Efficiency) detergent with your

Steam Washer.

Always follow the manufacturer’s

recommendations when adding detergent.

Using too much detergent can result in

detergent buildup in clothing and the washer.

Either powdered or liquid detergent may be used.

• When using liquid detergent, make sure the

liquid detergent cup and insert are in place.

Do not exceed the maximum ﬁll line.

• When using powdered detergent, remove

the insert and liquid detergent cup from the

compartment. Powdered detergent will not

dispense with the liquid detergent cup and

insert in place.

NOTE: Liquid or powdered color-safe bleach

may be added to the main wash compartment

with detergent of the same type.

Liquid Bleach Compartment

This compartment holds liquid chlorine bleach,

which will be dispensed automatically at the

proper time during the wash cycle.

• Do not add powdered or liquid color-safe bleach

to this compartment.

• Always follow the manufacturer’s

recommendations when adding bleach. Do not

exceed the maximum ﬁll line. Using too much

bleach can damage fabrics.

• Never pour undiluted liquid chlorine bleach

directly onto the load or into the drum. Fabric

damage can occur.

Fabric Softener Compartment

This compartment holds liquid fabric softener,

which will be automatically dispensed during the

final rinse cycle.

• Always follow the manufacturer’s

recommendations when adding fabric softener.

Do not exceed the maximum ﬁll line. Using

too much fabric softener may result in stained

clothes.

• Dilute concentrated fabric softeners with warm

water. Do not exceed the maximum ﬁll line.

• Never pour fabric softener directly onto the load

or into the drum.

IMPORTANT: Do not place or store laundry

products, such as detergent, bleach, or liquid

fabric softener, on top of your washer or dryer.

Wipe up any spills immediately. These products

can damage the finish and controls.

Designed specially to use only

HE (High-Efﬁciency) detergent

Designed specially to use only

HE (High-Efﬁciency) detergent

IMPORTANT: Your Steam Washer™ is

designed for use with only High-Efficiency

(HE) detergents. HE detergents are formulated

specifically for front-load washers and contain

suds-reducing agents. Always look for the HE

symbol when purchasing detergent.

HE detergents produce fewer suds, dissolve

more efficiently to improve washing and rinsing

performance, and help to keep the interior of your

washer clean.

Using a regular detergent may cause oversudsing

and unsatisfactory performance.

H O W TO U S E H O W TO U S E

CYCLE GUIDE

CONTROL PANEL FEATURES

POWER ON/OFF BUTTON

Press to turn the washer ON. Press again to turn

the washer OFF.

NOTE: Pressing the ON/OFF button during a

cycle will cancel that cycle and any load settings

will be lost.

CYCLE SELECTOR KNOB

Turn this knob to select the desired cycle. Once

the desired cycle has been selected, the standard

presets will be shown in the display. These

settings can be adjusted using the cycle setting

buttons anytime before starting the cycle.

START/PAUSE BUTTON

Press this button to START the selected cycle.

If the washer is running, use this button to PAUSE

the cycle without losing the current settings.

NOTE: If you do not press the START/PAUSE

button within 4 minutes of selecting a cycle, the

washer automatically turns off.

STEAM BUTTON

Press the STEAM button to add steam to the

selected cycle for added cleaning power.

NOTE: Steam can only be added to the

following cycles: STEAMFRESH™,

ALLERGIENE

SANITARY, BULKY/LARGE,

COTTON/NORMAL, and PERM PRESS.

CYCLE SETTING BUTTONS

Use these buttons to select the desired cycle

options for the selected cycle. The current

options are shown in the display. Press the

button for that option to view and select

other settings.

DELAY BUTTON

Press this button to delay the start of the wash

cycle. Each press of the button increases the

delay time by one hour, up to 19 hours.

LCD DISPLAY

The display shows the settings, estimated

time remaining, options, and status messages

for your Steam Washer™. The light in the

display will remain on through the cycle.

OPTION BUTTONS

The option buttons allow you to select

additional cycle options and will light when

selected. Certain buttons also allow you to

activate special functions by pressing and

holding the button for 3 seconds.

For detailed information about the individual

options, please see the following pages.

The cycle guide below shows the options and recommended fabric types for each cycle.

NOTE: To protect your garments, not every wash/rinse temperature, spin speed, soil level,

or option is available with every cycle.

H O W TO U S EH O W TO U S E

THE LCD DISPLAY

The LCD display shows the settings, estimated

time remaining, options, and status messages

for your washer. When the washer is turned on,

the light in the display will illuminate.

STATUS/CYCLE DISPLAY

This portion of the display shows the selected

cycle, operating status, and special messages.

If a cycle has special instructions, they will also

be displayed in this area.

ESTIMATED TIME REMAINING

When the START/PAUSE button is pressed, the

washer automatically detects the wash load

(weight) and optimizes the washing time, based

on the selected cycle and options. The display

will then indicate the estimated time remaining

for the selected wash cycle.

NOTE: The cycle time displayed may appear

much longer than that of a top-loading washer.

The displayed time is for the complete cycle,

rather than just the agitation portion of the cycle,

as is typically shown on a top-loading washer.

CYCLE COMPLETION INDICATOR

Shows how much of the current wash cycle has

been completed.

STEAM CYCLE INDICATOR

Indicates that a STEAM cycle has been selected.

DOOR LOCK INDICATOR

Indicates that the door is locked. The washer

door will lock while the washer is operating. The

door can be unlocked by pressing the START/

PAUSE button to stop the washer.

NOTE: If the temperature in the washer is too

high, the door cannot be unlocked until the

washer has cooled. If the water level is too high,

select the DRAIN & SPIN cycle to drain excess

water. Do not try to force open the door.

CHILD LOCK INDICATOR

When CHILD LOCK is set, the Child Lock

indicator will appear and all buttons are

disabled except the ON/OFF button. This

prevents children from changing settings while

the washer is operating.

DELAY WASH INDICATOR

This indicator shows that the washer has

been set for DELAY WASH. The washer will

start automatically after the set delay time

has passed.

CYCLE SETTING INDICATORS

These indicators show the current cycle

settings for WASH/RINSE, SPIN SPEED, SOIL

LEVEL, and BEEPER. To change these settings,

press the appropriate settings button.

NOTE: To protect your garments, not every

wash/rinse temperature, spin speed, soil level,

or option is available with every cycle.

6 7

OPERATING THE WASHER

Press the ON/OFF button to turn on the

washer. The lights around the cycle

selector knob will illuminate.

Turn the cycle selector knob to the desired

cycle. The display will show the

preset Rinse/Wash Temperature,

Spin Speed, Soil Level, and

Option settings for that cycle.

If you would like to change the settings

for that cycle, press the option button(s)

to display additional settings for that option.

Press the button again to cycle through

the settings until the desired setting is

highlighted.

NOTE: To protect your garments, not every

wash/rinse temperature, spin speed, soil

level, or option is available with every cycle.

Select any additional cycle options, such as

STEAM or DELAY

by pressing the

button for that

option.

NOTE: To protect your garments, not every

wash/rinse temperature, spin speed, soil

level, or option is available with every cycle.

Press the START/PAUSE button to begin

the cycle. The door will latch,

the display will change, and

the washer will calculate the

estimated time remaining. Once

the washer has calculated the estimated

total cycle time, the washer will start. To

pause the cycle at any time, press PAUSE.

NOTE: The cycle time displayed may

appear much longer than that of a top-

loading washer. The displayed time is for the

complete cycle, rather than just the agitation

portion of the cycle, as is typically shown on

a top-loading washer.

NOTE: If the temperature in the washer is

too high, the door cannot be unlocked until

the washer has cooled. If the water level is

too high, select the DRAIN & SPIN cycle to

drain excess water. Do not try to force the

door open.

Washing time can be reduced significantly

for small or lightly soiled loads by selecting

the Speed Wash cycle and setting the Soil

Level button to Light.

Once you have loaded the washer and added

laundry products (detergent, bleach, and/or

fabric softener):

When the load is finished, the beeper (if set)

will sound and the door will unlock.

Remove damp clothes from the washer

immediately. Check under the door seal

for small items.

SPIN SPEED

The washer drum spins at up to 1,320

RPM. This reduces drying time and

saves energy.

Press the SPIN SPEED button to select

the maximum spin speed. Some fabrics, such as

delicates, require a slower spin speed.

The Drain & Spin cycle:

The Spin Speed button also activates the Drain

& Spin cycle to drain the tub and spin clothes;

for example, if you want to remove clothes before

the cycle has ended.

To activate the DRAIN & SPIN cycle:

Press the ON/OFF button to turn on

the washer.

Press the SPIN SPEED button.

Select the desired spin speed.

NOTE: If NO SPIN is selected, the washer

will drain only.

Press the START/PAUSE button.

To Use the SteamFresh Cycle:

Turn on the washer and turn the cycle

selector knob to select the SteamFresh cycle.

Load up to 5 items and close the door.

NOTE: If there is any moisture inside the

drum, such as from a previous wash cycle,

wipe the drum dry with a towel before

adding clothes.

Press the STEAM button until the correct

number of items is shown in the display.

No other options need to be set.

Press the START/PAUSE button to start

the cycle.

After the SteamFresh cycle is complete, the

washer will tumble the clothes for up to 30

minutes to prevent rewrinkling.

After removing clothes from the SteamFresh

cycle, they may feel slightly damp. Place

clothes on a hanger for at least 10 minutes to

allow them to dry.

• The SteamFresh cycle is not recommended for

use with 100% cotton clothing.

• Remove stains from clothing before using the

SteamFresh cycle; the high heat could cause

stains to set permanently.

• Do not use SteamFresh with the following items:

wool, blankets, leather jackets, silk, wet clothes,

lingerie, foam products, or electric blankets.

• Best results are achieved when articles are of

similar size and fabric type. Do not overload.

H O W TO U S E

CYCLE SETTING BUTTONS

Each cycle has preset settings that are selected

automatically. You may also customize the

settings using the cycle setting buttons. Press

the button for that option to view and select

other settings.

The washer automatically adjusts the water level

for the type and size of wash load for best results

and maximum efficiency. It may seem there is no

water inside the drum in some cycles, but this is

normal.

NOTE: To protect your garments, not every wash/

rinse temperature, spin speed, soil level, or option

is available with every cycle. See the Cycle Guide

for details.

SOIL LEVEL

Adjusts the selected cycle to allow

more time for heavily soiled clothes or

less time for lightly soiled clothes.

BEEPER

Adjusts the volume of the end-of-cycle

beeper, or turns it off.

WASH/RINSE

Selects the wash and rinse

temperature combination for the

selected cycle. Press the WASH/RINSE

button repeatedly to scroll through

available settings.

• Your washer features a heating element to boost

the hot water temperature for Extra Hot settings.

This provides improved wash performance at

normal water heater settings.

• Select the water temperature suitable for the

type of load you are washing. Follow the fabric

care label for best results.

• Warm rinses leave the loads drier than cold

rinses. Warm rinses can increase wrinkling.

• In cold climates, a warm rinse makes the load

more comfortable to handle.

• Cold rinses use less energy.

H O W TO U S E

Using the SteamFresh

™

Cycle

SteamFresh uses the power of steam alone to

quickly reduce wrinkles and odor in fabrics. It

brings new life to wrinkled clothes that have been

stored for an extended time and makes heavily

wrinkled clothes easier to iron. SteamFresh can

also be used to help reduce odors in fabrics.

STEAM CYCLES

STEAM cycles include the Allergiene

Sanitary, Bulky/Large, Cotton/Normal,

and Perm Press cycles. Adding the

Steam option to these cycles provides

superior cleaning performance while reducing

energy and water consumption. By using a hot

steam spray from above and cooler water below,

fabrics get the cleaning benefits of a super hot

wash, without the energy usage or potential

damage to fabrics.

To Add STEAM to a Standard Cycle:

Turn on the washer and turn the cycle

selector knob to select a cycle with the

STEAM option.

Press the STEAM button. The washer will

automatically adjust the cycle settings.

Set any other desired options.

Press the START/PAUSE button to start the

cycle. The washer will start automatically.

CAUTION:

Do not touch the door during steam cycles.

The door surface can become very hot.

Allow the door lock to release before

opening the door.

Do not attempt to override the door lock

mechanism or reach into the washer during a

steam cycle. Steam can cause severe burns.

IMPORTANT NOTES ABOUT STEAM CYCLES:

• Steam may not be clearly visible during the

steam cycles. This is normal. Too much steam

could damage clothing.

• Do not use steam with delicate fabrics such as

wool, silk, or easily discolored fabrics.

• Do not touch the door.

ALLERGIENE™

The ALLERGIENE™ cycle is a powerful, high temperature cycle

designed specifically to reduce certain allergens.

• Selecting the ALLERGIENE™ cycle automatically incorporates

steam into the wash cycle.

• The ALLERGIENE™ cycle can significantly reduce allergens in

bedding and clothing.

• The ALLERGIENE™ cycle helps reduce dust mite populations

and helps reduce allergens.

• Due to the higher energy and temperatures used, the

ALLERGIENE™ cycle is not recommended for wool, silk, leather,

or any other delicate or temperature sensitive items.

HAND WASH/WOOL

• Only woolen items that are designated as “Machine-Washable”

should be washed in this washing machine

• Wash only small loads for optimum fabric care (less than 8 lbs.)

• Only neutral (wool safe) detergents should be used (Only a small

quantity of detergent is needed due to the small load size and

low volume of water in the cycle.)

• The HANDWASH/WOOL cycle uses a gentle tumble action and

low speed spin for ultimate fabric care

EXTRA RINSE

This option will add an extra rinse

cycle to the selected cycle. Use this

option to help ensure the removal

of detergent or bleach residue from

fabrics.

STAIN CYCLE

Select this option for heavily stained

clothes, such as play clothes or work

clothes. Stain Cycle will add extra

wash time to the selected cycle, as

well as an additional rinse cycle.

WATER PLUS

Select this option to add extra water to

the wash and rinse cycles for superior

results, especially with large or bulky

items.

SPECIAL FUNCTIONS

The option buttons also activate special

functions, including CHILD LOCK, DRUM

LIGHT, TUB CLEAN, and LANGUAGE. Press and

hold the option button marked with the special

function for 3 seconds to activate.

DRUM LIGHT

The drum is equipped with a blue LED

light that illuminates when the washer

is turned on. This light automatically

turns off when the door is closed and

the cycle starts. To turn on the light

during a cycle, press and hold the RINSE

SPIN

button for 3 seconds. The drum light will

illuminate and then turn off automatically after 4

minutes.

TUB CLEAN

A buildup of detergent residue can

occur in the wash tub over time and

can lead to a mildewy or musty smell.

The TUB CLEAN cycle is specially

designed to remove this buildup. Press

and hold the EXTRA RINSE button for 3 seconds

to activate this cycle. The display will show a

message to add liquid bleach to the dispenser.

After the cycle has ended, open the door and

allow the drum interior to dry completely.

NOTE: Do NOT use this cycle with clothes,

and do NOT add detergent or fabric softener.

H O W TO U S E

CYCLE OPTION BUTTONS

Your Steam Washer™ features several additional

cycle options to customize cycles to meet your

individual needs. Certain option buttons also

feature a special function (see the following page

for details) that can be activated by pressing and

holding that option button for 3 seconds.

To Add Cycle Options to a Cycle:

Turn on the washer and turn the cycle

selector knob to select the desired cycle.

Use the cycle setting buttons to adjust the

settings for that cycle.

Press the cycle option button(s) for the

option you would like to add. The cycle

option buttons, except STEAM and DELAY,

will light when selected.

Press the START/PAUSE button to start the

cycle. The washer will start automatically.

NOTE: To protect your garments, not every wash/

rinse temperature, spin speed, soil level or option

is available with every cycle. See the Cycle Guide

for details.

STEAM

Use the STEAM button to add steam

to the cycle for extra cleaning power

and improved efficiency. See Steam

Cycles section for additional details.

NOTE: Not all cycles can be used with

the STEAM option.

DELAY

Once you have selected the cycle and

other settings, press this button to

delay the start of the wash cycle. Each

press of the button increases the delay

time by one hour, up to 19 hours.

PREWASH

Select this option to add a 16-minute

prewash and spin cycle to the chosen

cycle. This is especially useful for

heavily soiled items.

To change the language:

Press the ON/OFF button to turn on

the washer.

Press and hold the WATER PLUS button for

3 seconds, until the following screen appears

in the display.

Press the WATER PLUS button repeatedly

to cycle through “FRANÇAIS” (French),

“ESPAÑOL” (Spanish), and then back to

English.

RINSE

SPIN

Select this option to rinse and spin a

load separately from a regular cycle.

This can be helpful in preventing fresh

stains from setting in fabrics.

To activate the Rinse

Spin cycle:

Press the ON/OFF button to turn on

the washer.

Press the RINSE

SPIN button.

Press the START/PAUSE button.

H O W TO U S E

SPINSENSE™

SPINSENSE can be used to help

reduce or eliminate vibrations,

especially on wood floor installations.

To activate SPINSENSE™:

While the washing machine is running in any

cycle, press and hold the STAIN CYCLE button

for 3 seconds.

The STAIN CYCLE button light will remain lit while

the washer is running to show that SPINSENSE

is active. The SPINSENSE function will remain

active for every cycle, even after a power failure.

To cancel SPINSENSE™:

Press and hold the STAIN CYCLE button for 3

seconds to turn off the SPINSENSE function.

The wool wash cycle of this machine has been

approved by Woolmark for the washing of machine

washable Woolmark products provided that the

products are washed according to the instructions

on the garment label and those issued by the

manufacturer of this washing machine, M0708

SPECIAL FUNCTIONS

CHILD LOCK

Use this option to prevent unwanted

use of the washer or to keep cycle

settings from being changed while the

washer is operating. Press and hold

the PREWASH button for 3 seconds to

activate or deactivate CHILD LOCK.

CHILD LOCK will be shown in the display, and all

controls are disabled. The washer can be locked

during a cycle.

LANGUAGE

This option allows you to change the

language shown in the display. Once

set, the selected language will stay set

even after the power is turned off.

The display language options are English, French,

and Spanish; English is the default language.

Certiﬁed by NSF

Certiﬁcado por NSF

NSF International (formerly the National Sanitation Foundation),

certifies that SANITARY cycle reduces 99.9% of bacteria

on laundry, and none of bacteria will carry over onto the

next laundry load.

CLEANING THE WASHER

C A R E A N D C L E A N I N G

wWARNING:

• Unplug the washer before cleaning to avoid the risk of electric shock. Failure to follow this warning

can cause serious injury, fire, electrical shock, or death.

• Never use harsh chemicals, abrasive cleaners, or solvents to clean the washer.

They will damage the finish.

Cleaning the Dispenser

The dispenser should be cleaned periodically

to remove buildup from detergent and other

laundry products.

Pull out the dispenser drawer until it stops.

Press the button in the center of the drawer

and pull to remove the drawer.

Remove the inserts from the drawer, and

clean them with warm water and a soft cloth

or brush to remove any residue or buildup.

Wipe out the inside of the drawer opening

with a damp cloth. Reassemble the drawer

and reinstall in the drawer opening.

NOTE: Do not use anything other than water

to clean the drawer, inserts, and drawer

opening. If any sort of household cleaner

drains into the interior of the washer, run a

RINSE

SPIN cycle before washing clothes.

C A R E A N D C L E A N I N G

Cleaning the Exterior

Proper care of your washer can extend its life. The

outside of the machine can be cleaned with warm

water and a mild, nonabrasive household detergent.

Immediately wipe off any spills with a soft, damp cloth.

IMPORTANT: Do not use methylated spirits, solvents,

or similar products.

Never use steel wool or abrasive cleansers; they can

damage the surface.

REGULAR CLEANING

Care and Cleaning of the Interior

Use a towel or soft cloth to wipe around the

washer door opening, door seal, and door glass.

These areas should be kept clean to ensure a

watertight seal. Be sure to wipe under the inside

rubber seal to remove any moisture or soil.

Always remove items from the washer as soon

as the cycle is completed. Leaving damp items

in the washer can cause wrinkling, color transfer,

and odor.

Run the TUB CLEAN cycle regularly to remove

detergent buildup and other residue.

Removing Lime Buildup

If you live in an area with hard water, lime scale

can form on internal components of the washer.

Use of a water softener is recommended in areas

with hard water. If a descaler is used, make sure

that it is suitable for use in a washer, and run the

TUB CLEAN cycle before washing clothing.

Lime scale and other spots may be removed

from the stainless steel drum using a stainless

steel cleaner. Do NOT use steel wool or abrasive

cleansers; they can damage the surface.

Storing the Washer

If the washer will not be used for an extended

period of time and is in an area that could be

exposed to freezing temperatures:

Turn off water supply tap.

Disconnect hoses from water supply and

drain water from hoses.

Plug the power cord into a properly grounded

electrical outlet.

Add 1 gallon of nontoxic recreational vehicle

(RV) antifreeze to the empty wash drum.

Close door.

Select the spin cycle and let washer spin

for 1 minute to drain out all the water.

NOTE: Not all of the RV antifreeze will be

expelled.

Unplug the power cord, dry the drum interior

with a soft cloth, and close the door.

Remove the inserts from the dispenser. Drain

any water in compartments and dry the

compartments.

Store the washer in an upright position.

To remove the antifreeze from the washer

after storage, run washer through a complete

cycle using detergent. Do not add laundry!

Cleaning the Steam and Water

Circulation Nozzles

Use a cotton swab to remove lime or detergent

buildup from the inside of the steam and water

circulation nozzles. NEVER use a sharp or

pointed object; you could damage the nozzles.

Removing the Stain in Door Seal

NOTE: Wear rubber gloves and eye protection while

performing the following procedure:

Dilute 3/4 cup (177 ml) liquid chlorine bleach with 1

gallon (3.8 L) of warm/hot water.

Use this solution to wipe down all surfaces of the

gasket to remove the deposits that are causing any

odor. (Be sure to fold back the lip of the gasket to get

under the edge where residue can build up.)

Wipe the gasket with a dry cloth.

Leave the door open to allow the gasket to dry completely.

Do not use undiluted bleach as this will damage the gasket.

Follow the manufacturer’s instructions for proper use of bleach.

If the gasket cannot be cleaned properly, it should be replaced.

Cleaning the Drain Pump Filter

Lint and other objects may accumulate and clog

the drain pump filter. If the washer fails to drain

properly, unplug the washer and allow the water

to cool, if necessary, before proceeding.

Open the drain pump filter access panel.

Unclip the drain hose and pull it out. Place

the end of the drain hose in a pan, bucket, or

floor drain to catch water.

C A R E A N D C L E A N I N G

Remove the plug from the drain hose, and

allow the water to drain completely.

Twist the pump filter counterclockwise to

remove. Remove any lint and foreign objects

from the pump filter.

Reverse the above steps to reinstall the drain

pump filter and drain hose. Be sure to close

the cover panel when finished.

MAINTENANCE (cont.)

Drain Hose

Plug

Pump

Filter

C A R E A N D C L E A N I N G

Cleaning the Water Inlet Filters

If the washer detects that water is not entering

the dispenser, an error message will show on the

display. If you live in an area with hard water, this

may be caused by clogged inlet filters.

Turn off both water taps completely. Unscrew

the hot and cold water lines from the back of

the washer.

Carefully remove the filters from the water

inlets, and soak them in white vinegar

or a lime scale remover, following the

manufacturer’s instructions. Rinse thoroughly

before reinstalling.

Press the filters back into place and reattach

the water lines. Do NOT operate the washer

without the inlet filters.

IMPORTANT: Use extreme care when removing

and cleaning the filters. If the filters cannot be

cleaned or are damaged, do NOT operate the

washer without the inlet filters. Contact LG

Customer Service or a qualified LG servicer.

Inlet Filter

MAINTENANCE

IMPORTANTE: Use ONLY the inlet hoses

provided by LG with this laundry product.

Aftermarket hoses are not guaranteed to fit or

function correctly. Other hoses may not tighten

correctly and could cause leaks. Subsequent

damage to product or property will not be

covered under the terms of LG's warranty.

T RO U B L E S H O OT I N G

NORMAL SOUNDS YOU MAY HEAR

Problem Possible Causes Solutions

Rattling and

clanking noise

Thumping sound

Water leaking

around washer

• Foreign objects, such as

keys, coins, or safety pins,

may be in drum or pump.

• Heavy wash loads may

produce a thumping sound.

• Washer load may be out

of balance.

• Shipping bolts and/or

packaging materials not

removed.

• Wash load may be unevenly

distributed in the drum.

• Not all leveling feet are resting

ﬁrmly on the ﬂoor.

• Floor not rigid enough.

• Fill hose connection is loose

at tap or washer.

• House drain pipes are

clogged.

• Stop washer and check drum and drain ﬁlter for

foreign objects. If noise continues after washer is

restarted, call for service.

• This is normal. If sound continues, washer is

probably out of balance. Stop and redistribute

wash load.

• Stop and redistribute wash load.

• See Installation Instructions for removing shipping

bolts and packaging.

• Stop washer and rearrange wash load.

• Adjust the leveling feet. Make sure all four feet are in

ﬁrm contact with the ﬂoor while the washer is in the

spin cycle with a load.

• Make sure that the ﬂoor is solid and does not ﬂex.

Refer to “Flooring” in the Installation section.

• Check hoses. Check and tighten hose connections.

• Unclog drain pipe. Contact a plumber if necessary.

The following sounds may be heard while the

washer is operating. They are normal.

Clicking:

Door lock relay when the door locks and unlocks.

Spraying or hissing:

Steam or water spraying or circulating during

the cycle.

Humming or gurgling:

Drain pump pumping water from the washer at

the end of a cycle.

Splashing:

Clothes tumbling in the drum during the wash

and rinse cycles.

BEFORE CALLING FOR SERVICE

Your Steam Washer™ is equipped with an automatic error-monitoring system to detect and diagnose

problems at an early stage. If your washer does not function properly or does not function at all, check the

following before you call for service.

Vibrating noise

Excessive sudsing

• Too much detergent or

incorrect detergent.

• Reduce detergent amount or use low-sudsing

detergent.

Only use detergent with the HE

(High-Efﬁciency) logo.

BEFORE CALLING FOR SERVICE (cont.)

Problem Possible Causes Solutions

Washer fills with

water slowly or not

at all, or the display

shows:

Washer will not

turn on

Musty or mildewy

odor in washer

• Water supply taps are not

open fully.

• Water line hoses are kinked,

pinched, or bent.

• Water inlet ﬁlters are clogged.

• Water pressure to tap or

house is too low.

• Power cord is not properly

plugged in.

• House fuse is blown, circuit

breaker has tripped, or power

outage has occurred.

• The door is not closed

properly.

• Incorrect or too much

detergent has been used.

• Inside of tub not cleaned

properly.

• Make sure that the water taps are open fully.

• Make sure the hoses are not kinked or pinched. Be

careful when moving the washer.

• Clean the inlet ﬁlters. See the

Care and Cleaning

section.

• Check another faucet in the house to make sure that

household water pressure is adequate.

• Make sure that the plug is plugged securely into a

grounded, 3-prong, 120-VAC, 60-Hz. outlet.

• Reset circuit breaker or replace fuse. Do not increase

fuse capacity. If the problem is a circuit overload,

have it corrected by a qualiﬁed electrician.

• Make sure that the door is closed properly and press

the START/PAUSE button. After starting a cycle, it

may take a few moments before the drum begins to

turn or spin. The washer will not spin unless the door

is locked (DOOR LOCK will appear in the display).

• If the door is closed and locked and the open door

error message is displayed, call for service.

• Use only HE (High-Efﬁciency) detergent in accordance with

the manufacturer’s instructions.

• Run the TUB CLEAN cycle regularly. Be sure to wipe

around and under the door seal frequently.

• Clean around door seal/glass to prevent odor or mildew:

1. wipe dry the door seal/glass and the door opening area

2. wipe around the inner drum/door seal and the lower door seal

Washer won’t

spin, or the display

shows:

• The washer automatically

adjusts the wash time for

the amount of laundry, water

pressure, water temperature,

and other operating

conditions.

• This is normal. The washer adjusts cycle time

automatically to provide optimal results for the

selected cycle.

Wash cycle time is

longer than usual

Door will not

unlock when cycle

is stopped or

paused

• Interior temperature of

washer is too high.

• Water level in washer is too

high.

• The washer door has a safety lock to prevent burns.

Allow the washer to cool until the DOOR LOCK

indicator turns off in the display.

• Allow the washer to complete the programmed cycle,

or run the DRAIN & SPIN cycle to drain the water.

Steam is not visible

during STEAM cycle

• This is normal.

• Because it uses pressurized steam, the washer

requires very small amounts of steam to achieve

optimal results. Excess steam could damage fabrics

and reduce efﬁciency.

Water in the washer

drains slowly or not

at all, or the display

shows:

• Drain hose is bent, pinched,

or clogged.

• The drain ﬁlter is clogged.

• Make sure the drain hose is free of clogs, kinks, etc.,

and is not pinched behind or under the washer.

• Clean the drain ﬁlter. See the

Care and Cleaning

section.

T RO U B L E S H O OT I N G

Staining

• Add laundry products to the

washer drum.

• Washer not unloaded

promptly.

• Does not properly sort the

clothes.

• Load the laundry products into the dispenser.

• Always remove items from the washer as soon as

the cycle is completed.

• Always wash dark colors separately from light

colors and whites to prevent discoloration. If

possible, do not wash heavily soiled items with

lightly soiled ones.

T RO U B L E S H O OT I N G

BEFORE CALLING FOR SERVICE (cont.)

Problem Possible Causes Solutions

The display shows:

• Load is too small.

• Load is out of balance.

• The washer has an imbalance

detection and correction

system. If individual heavy

articles are loaded (bath

mat, bath robe, etc.) and the

imbalance is too great, the

washer will make several

attempts to restart the spin

cycle. If an imbalance is still

detected, the washer will stop

and the error code will be

displayed.

• Add 1 or 2 similar items to help balance the load.

• Rearrange items to help balance the load.

• Control error.

• Unplug the washer and call for service.

The display shows:

• Water level is too high due to

a faulty water valve.

• Close the water taps, unplug the washer, and call

for service.

The display shows:

• The water level sensor is not

working correctly.

• Close the water taps, unplug the washer, and call

for service.

The display shows:

• Thermal overload protection

circuit in the motor has been

tripped.

• Allow the washer to stand for 30 minutes to allow the

motor to cool; then restart the cycle. If the LE error

code still appears, unplug the washer and call

for service.

The display shows:

• A power failure has occurred.

• Restart the cycle.

The display shows:

Drum light does

not stay on

• This is normal.

• The drum light shuts off automatically when the

washer starts. Press and hold the RINSE

SPIN

button for 3 seconds to turn on the light; it will turn

off automatically after 4 minutes.

Remote Laundry

Monitor (optional

accessory) not

working properly

• Refer to the instruction

manual for the Remote

Laundry Monitor.

• Refer to the instruction manual for the Remote

Laundry Monitor.

KEY DIMENSIONS AND SPECIFICATIONS

Steam Washer

™

Model WM2688H*MA

Description Front-Loading Washer

Electrical Requirements 120 VAC @ 60 Hz.

Max. Water Pressure 14.5~116 PSI (100~800 kPa)

Dimensions 27"(W) X 29

"(D) X 38

/16

"(H), 51"(D with door open)

68.6 cm (W) X 75.6 cm (D) X 98.3 cm (H), 129.5 cm (D with door open)

Net Weight 192 lb. (87 kg)

Max. Spin Speed 1,320 RPM

The appearance and speciﬁcations listed in this guide may vary due to constant product improvements.

S P E C I F I C AT I O N S / O P T I O N A L AC C E S S O R I E S

OPTIONAL ACCESSORIES

For these and other LG products, contact your local LG dealer,

or visit our Web site at ca.lge.com.

Pedestal

Give your LG washer

and dryer a boost with

matching 14-inch high

pedestals. They feature

a storage drawer for

added convenience.

14" Pedestal Color

WDP3W White

WDP3B Black

WDP3S Titanium

WDP3N Navy Blue

WDP3R Wild Cherry Red

Stacking Kit

If space is at a premium,

use this kit to securely

stack your LG front-load

washer and dryer.

Bracket Kit Color

WSTK1 White

BSTK1 Black

SSTK1 Titanium

NSTK1 Navy Blue

RSTK1 Wild Cherry Red

Remote Laundry Monitor

Check the status of a load

of laundry from anywhere in

the house without special

wiring. This unit plugs into any

standard household outlet and

toggles between washer and

dryer status.

Wrinkling

• Washer not unloaded

promptly.

• Washer overloaded.

• Hot and cold water inlet

hoses are reversed.

• Always remove items from the washer as soon as

the cycle is completed.

• The washer can be fully loaded, but the drum

should not be tightly packed with items. The door

of the washer should close easily.

• Hot water rinse can set wrinkles in garments. Check

the inlet hose connections.

N OT E S

Your LG Washing Machine will be will repaired or replaced, at LG’s option, if it proves to be defective in material or work-

manship under normal use, during the warranty period (“Warranty Period”) set forth below, effective from the date (“Date

of Purchase”) of original consumer purchase of the product. This warranty is good only to the original purchaser of the

product and effective only when used in the United States, including Alaska, Hawaii, and U.S. Territories.

THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,

ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT ANY IMPLIED

WARRANTY IS REQUIRED BY LAW, IT IS LIMITED IN DURATION TO THE EXPRESS WARRANTY PERIOD ABOVE.

NEITHER THE MANUFACTURER NOR ITS U.S. DISTRIBUTOR SHALL BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL,

INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY NATURE, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR

PROFITS, OR ANY OTHER DAMAGE WHETHER BASED IN CONTRACT, TORT, OR OTHERWISE. Some states do not allow

the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above

exclusion or limitation may not apply to you. This warranty gives you speciﬁc legal rights and you may also have other rights that vary

from state to state.

THIS LIMITED WARRANTY DOES NOT APPLY TO:

• Service trips to your home to deliver, pick up, and/or install the product, instruct, or replace house fuses or correct wiring, or

correction of unauthorized repairs.

• Damages or operating problems that result from misuse, abuse, operation outside environmental speciﬁcations or contrary to the

requirements of precautions in the Operating Guide, accident, vermin, ﬁre, ﬂood, improper installation, acts of God, unauthorized

modiﬁcation or alteration, incorrect electrical current or voltage, or commercial use, or use for other than intended purpose.

The cost of repair or replacement under these excluded circumstances shall be borne by the consumer.

CUSTOMER INTERACTIVE CENTER NUMBERS

TO CONTACT LG ELECTRONICS

BY MAIL:

LG Customer Interactive Center

P. O. Box 240007

201 James Record Road

Huntsville, Alabama 35824

ATTN: CIC

WARRANTY PERIOD:

LABOR: One Year from the Date of Purchase.

PARTS (except as listed below): One Year from the Date

of Purchase.

Electronic Control Board: Two Years from the Date

of Purchase.

Drum Motor:

Seven Years from the Date of Purchase.

Stainless Steel Drum: Lifetime

Replacement Units and Repair Parts may be new or

remanufactured.

Replacement Units and Repair Parts are warranted for the

remaining portion of the original unit’s warranty period.

LG ELECTRONICS, INC.

LG WASHING MACHINE LIMITED WARRANTY - USA

HOW SERVICE IS HANDLED:

In-Home Service:

Please retain dealer’s dated bill of sale or delivery

ticket as evidence of the Date of Purchase for proof of

warranty, and submit a copy of the bill of sale to the

service person at the time warranty service is provided.

Please call 1-800-243-0000 and choose the

appropriate option to locate your nearest LG

Authorized Service Center.

Or visit our Web site at: http://www.lgservice.com.

Call 1-800-243-0000 (24 hours a day, 365 days a

year), and select the appropriate option from the menu.

Or visit our Web site at: http://www.lgservice.com.

To obtain Customer Assistance, Product

Information, or Dealer or Authorized Service

Center location:

Product Registration Information

Model:

Serial Number:

Date of Purchase:

The model and serial number can be located on the rating

plate on the back of the washer.

Page is loading ...

LG Electronics WM2688H*MA User manual

Brand: LG Electronics

Model: WM2688H*MA

Category: Washing machines

Type: User manual

Download PDF

report

in other languages

español: LG Electronics WM2688H*MA Manual de usuario

LG Electronics WM2688H*MA User manual

LG Electronics WM2688H*MA User manual

in other languages

Related papers

Other documents