Azio Levetron User guide

Brand: Azio

Model: Levetron

Category: Mice

Type: User guide

Azio Levetron is a gaming mouse designed for precision and customization. With adjustable DPI up to 5000, you can fine-tune the sensitivity for different gaming scenarios. The weight is adjustable between 134g to 164g in 5g increments, so you can find the perfect balance for your grip. Three programmable buttons allow you to create macros for quick actions, giving you an edge in competitive gaming.

GM533U

THE GM533U ADVANTAGE

•Adjustable DPI:

As a general rule of thumb, the higher the DPI on a mouse the more accurate

it is. At a maximum of 5,000dpi, the Levetron GM533U ensures ultra-high precision during those

critical gaming moments. Adjust between 800, 1600, and 5,000dpi right at your ngertips in real

time.

•3 Programmable Buttons: 3 dedicated programmable buttons designed to record single key presses or

complex macros.

•Adjustable Weight:

Like your mouse a little bit lighter or heavier? With the GM533U custom

weight system, you can adjust the weight of your mouse to your preference.

PACKAGE CONTENTS

• Levetron GM533U Gaming Mouse

• Adjustable Weight Cartridge (x6 Ballast Weights)

• Software CD

• User Guide

FEATURES

• 800/1600/5000dpi Adjustment

• Laser tracking for optimal accuracy

• Weight adjustable between 134g to 164g in 5g increments

• 3 Dedicated programmable buttons

SPECIFICATIONS

•Interface:

USB

•OS Support:

Windows XP/Vista/7 (all versions)

•Tracking Method:

Laser

•Sensitivity (DPI): 800/2000/5000

•Buttons:

•Dedicated Programmable Buttons:

3 Buttons

•Cable Length:

6 feet

•Dimensions:

4.72” x 2.95”x 1.58” inches (LxWxH)

•Weight:

164g (adjustable to 134g, in 5g increments)

SYSTEM REQUIREMENTS

• PC with built-in USB ports

• Windows XP, Vista, or 7

• CD ROM for software installation

• At least 35mb of hard disk space

MOUSE LAYOUT

The components of this mouse includes:

Left Mouse Button

Right Mouse Button

DPI Setting Status Light

Tilt/Scroll Wheel

Programmable Macro Buttons

800/2000/5000dpi Toggle Switch

GM533U

GETTING STARTED

Adjusting the Mouse Weight:

1. Open the weight cartridge compartment on the bottom side of the mouse by turning the

cover 90 degrees counter-clockwise.

2. Remove the weight cartridge.

3. Remove the desired amount of ballast weights from the cartridge to reduce the weight of the

mouse.

4. Replace the weight cartridge into the compartment and then replace the cover.

Connecting the Mouse:

Connect the USB plug of the gaming mouse into an available USB port on your computer. For

maximum stability, we recommend connecting it directly to the computer. For maximum stability,

we recommend connecting it directly to the computer (as opposed to through a USB hub). The

operating system will automatically recognize the new hardware and install the required drivers.

This gaming mouse is fully plug & Play and software is not required for basic operation.

However, to access all functions of the mouse including macro button programming, please install

the included software.

GM533U

Changing the DPI (Resolution)

Press the DPI button (6) to toggle between 800/2000/5000dpi. A higher tracking rate will increase

the speed of the mouse pointer on the screen. This function is useful for changing the tracking

rate on-the-y.

Increasing the DPI will also improve the accuracy of the mouse. We recommend using the highest

DPI available on the hardware side and then use the Windows or game mouse sensitivity setting

to decrease the mouse speed to your liking. This will give you the maximum performance from the

mouse.

When changing the resolution, the control light (3) will blink briefly at different frequency as a

visual indicator of the current speed selected.

DPI CONTROL LIGHT

800 Slow Blinks

2000 Medium Blinks

5000 Fast Blink

SOFTWARE INSTALLATION

To install the software, please insert the software CD or visit our website to obtain the latest ver-

sion of the mouse software.

Software Installation Procedure:

Plug the USB cable into a USB port of the PC.

Insert the software CD into the CD or DVD ROM drive (or download from our website).

Follow the on-screen setup wizard to install software.

Click the nish button to complete the software installation.

Software Un-install Procedure:

To un-install, click the “Start menu” and navigate to Control Panel.

Select “Add/Remove Programs”.

Click on “AZiO GM533U Driver”.

Click on Remove or Uninstall.

Accessing the Software Help

• To use the application help, rst double-click the software Icon to launch the software. The help

section is accessed by clicking on the question mark in the upper right corner of the software

interface.

GM533U

USING THE SOFTWARE

The functions of the software can be broken down to 3 sections:

1. ProleSettings:

Create specic proles for all users and applications.

2. Macro Settings:

Create strings of custom Macro functions to program to different buttons.

3. Button Customization:

Select a button and program it to a different key, a special function

or a custom Macro string from step 2.

PROFILE SETTINGS

All user created Macros and user custom-

ized settings are saved to Proles. The in-

formation in each Prole is saved to a cor-

responding le in your computer. “Default

Prole” is the default prole and contains

no customized settings of the mouse. Click

on it to access the Proles Settings page

to add or edit your own proles.

The Proles Settings page is divided into three columns – Active, Name, and Path. Each row

represents one Prole.

Active:

Put a checkmark next to the Prole that you want to make active.

Name:

This column displays the name of the Prole.

Path:

This shows the lename and location of where the Prole is saved to.

If no proles are selected to be active, the system will revert to the default prole. Please note that

the default prole does not contain any customized functions and cannot be programmed. Other

functions on this page include:

New:

Click here to create a new Prole. Enter the le name. The lename will also be the name of

the Prole. This information is displayed under the “Name” column of this page.

Load:

Load a previously saved Prole.

Delete:

Delete a Prole.

WARNING:

After making any changes, remember to click on “OK”, “Cancel” or “Apply”. “OK” will

save all setting and exit Prole Settings interface. “Cancel” will exit without saving any changes.

Clicking “Apply” will save the changes without exiting the interface.

GM533U

CreateaNewProle

Click “New” from the Proles Settings interface to create a new Prole. Type a name in the “Save

as” pop-up window and click “Save.” Please note that the le name will also be used as the Prole

name. This prole will be saved in the “AZiO” folder within the “Documents” folder.

After saving, the software will return to the Prole Settings window. The newly added Prole will

appear in the Prole list. Tick the “Active” checkbox on the left to active it and “apply” to save the

settings without exiting. To nish the setup and return to the main interface, click the “OK” button.

LoadanExistingProle

To load a previously created or downloaded prole, click “Load” and select the le from the pop-

up window. The software will automatically return to the Prole Settings window. To activate it,

please tick the checkbox next to the respective Prole name.

DeleteaProle

Unwanted Proles can be deleted in the Prole Settings window by selecting it and clicking on

“Delete”. Click “OK” or “Apply.” This operation will only delete the Prole data from this software,

it will not delete the physical saved le of the Prole. To delete the save le, please use Windows

Explorer and go to the “AZiO” folder within the “Documents” folder.

MACRO SETTINGS

Macro functions allow players to create

short, long and complex command se-

quences for their applications and games.

This section will illustrate how to create or

edit a Macro function. After which, please

see the next section for assigning keys to

the Macros created here. For now, click on

“Macro Settings” to enter the Macro settings

interface.

Creating a new Macro function:

1. Start by clicking on “New”.

2. Enter a name or description for this Macro function and press Enter.

3. Ticking the “Record interval time” checkbox will record the Macro string in the same timing

sequence each key is pressed or released. The delay is calculated in milliseconds and can

be manually entered or edited after the Macro string is created. If left unchecked, the software

will assign it a default value of 1ms delay between each key actions. Please note that

1,000ms is equal to 1 second.

4. Click on “Record” to start entering the Macro string.

5. When completed, click on “Stop Record” and “Apply” to apply the changes or “Cancel” to

cancel the changes.

Editing an existing Macro function:

Please refer to the diagram on the next page.

1. In the top section, select the Macro to be edited.

2. On the bottom section, double-click on the portion of the Macro string to be modied. For

example, double-click on the Delay value, or Action value to make changes.

3. Clicking on “Delete” will delete that line and clicking on “Clear” will clear all strings of that

Macro.

4. Clicking on “Record” will allow you to add more commands to the Macro.

5. To move a specic string of the Macro up or down, highlight the respective string and use the

navigation buttons to the right.

6. Click on Ok, Cancel, or Apply when completed.

GM533U

Macro Settings Interface Diagram

FUNCTION SETTINGS

The Levetron GM533U gaming mouse is designed to be highly customizable. Just about every but-

ton (besides the DPI setting) can be programmed to have a different button assignment, to perform

special functions such as launching an application or multimedia/web navigating, or to execute

Macro functions.

To Program a button, open the software interface and simply click on the respective button on the

virtual mouse on-screen. For example, click on the M3 key to program it.

GM533U

Button Settings Interface

Once a button have been chosen for program-

ming, the Key Settings interface (on the right)

will be displayed. Please click on the button

which corresponds to the function of your

choice. After which, please click on “OK” or

“Cancel” to return back to the main interface.

WARNING:

After changing any key settings,

you will still need to click on the “Apply” button

on the MAIN software interferface in order for

the change to take effect.

• Default Function:

This is the default setting and basically means there is no changes.

• No Function:

This option turns OFF the button (thus, No Function).

• Assign New Key:

Click here to give this button a new assignment or function. This includes

web browser functions as well as multimedia functions such as play/pause, next track, back

track, etc. Scroll through the drop-down list to see all available options.

• Run…:

Set this button to launch a program or application of your choice.

• Play Macro:

Use this option to assign to the button a Macro function which was created in

the “Macro Settings” section.

• Stop Playing Macro:

Click here to stop the Macro function once it has been activated but

not yet completed. For example, if a very long Macro was executed, use this function to stop

it half way through. Alternatively, right-click on the system-tray icon and select “Stop playing

macro.”

• Say String:

This function allows users to preset a commonly used text and instantly recall

the text. This can be used in many different ways. Here are a couple of usage examples: (1)

Use it during gaming to say commonly used phrases such as “good luck, have fun!” or “heads

up, incoming!”, etc. Or use it for commonly used commands. For example, in StarCraft 2, pro-

gram one of your keys as “/dance” or “/cheer” so you can instantly taunt your opponent on the

y! We’re condent that you will nd even more creative ways to use these functions than us.

When nished programming individual buttons, from the main user interface, please make sure to

click “Ok” or “Apply” to make the changes effective. From the main interface, in order to distinguish

the keys, all customized buttons will be displayed in ORANGE. BLACK color keys indicates default

function and the BLUE mouse roll-over indicates that the button is customizable.

GM533U

SUPPORT & WARRANTY

Support

If you need assistance with this product, please visit our website at www.aziocorp.com for

frequently asked questions and troubleshooting tips. Otherwise, please contact our dedicated

customer care team.

There are several ways to reach us:

North America

By Phone:

(866) 468-1198

By eMail:

[email protected]

On Live Help:

http://www.aziocorp.com/support/helpdesk.htm

International Support

By eMail: [email protected]

Limited 3-Year Warranty

AZiO Corporation warrants only to the original purchaser of this product, when purchased from an

AZiO-authorized reseller or distributor, that this product will be free from defects in material and

workmanship under normal use and service for 3 years after purchase. AZiO reserves the right,

before having any obligation under this warranty, to inspect the damaged AZiO product, and all

costs of shipping the AZiO product to AZiO for inspection shall be borne solely by the purchaser. In

order to keep this warranty in effect, the product must have been handled appropriately and must

not have been misused in any way.

This warranty does not cover any damage due to accident, misuse, abuse or negligence. Please

retain the dated sales receipt as evidence of the original purchaser & date of purchase. You will

need it for any warranty service. In order to claim under this warranty, purchaser must make claim

to AZiO and obtain an RMA# which is to be used within 15 days of issuance and must present

acceptable proof of original ownership (such as original receipt) for the product. AZiO, at its option,

shall repair or replace the defective unit covered by this warranty. This warranty is non-transferable

and does not apply to any purchaser who bought the product from a reseller or distributor not

authorized by AZiO, including but not limited to purchases from internet auction sites. This warranty

does not affect any other legal rights you may have by operation of law. Contact AZiO through

email, chat, or through one of the technical support numbers listed for warranty service procedures.

For Warranty Service

In the event that warranty repair or replacement is necessary, please provide proof of purchase

(store receipt or invoice) in order to receive warranty service.

• In North America: Within the rst 60 days after purchase, please return your product to

your dealer or reseller for a replacement. If the product is still within warranty and you can

no longer return it to your dealer, please contact AZiO Customer Support (see above) for

assistance and instructions. AZiO will not accept returns without prior approval and an RMA

number.

• In Europe: Within the rst year after purchase, please return the product to your dealer or

reseller for a replacement. If the product is still within warranty and you can no longer return it

to your dealer, please contact AZiO Customer Support (see above) for assistance and instruc-

tions. AZiO will not accept returns without prior approval.

• Outside North America and Europe: If your product needs to be returned within the

warranty period, please do so through the retailer or distributor from whom you purchased the

product.

GM533U

Azio Levetron User guide

Brand: Azio

Model: Levetron

Category: Mice

Type: User guide

Download PDF

report

Azio Levetron User guide

Azio Levetron User guide

Related papers

Other documents