Philips 55PW936317F Owner's manual

Brand: Philips

Model: 55PW936317F

Category: LCD TVs

Type: Owner's manual

This manual is also suitable for

51PW9363/17

Your Television's

Directions for Use

51PW9363

55PW9363

60PW9363

Product Highlights

• High-definition

• HD DVI and

• Active Co

°E

....iiiiiiiiiiiiiiiiiiiiiiiiii iiiiii

3135 035 21381

Once your PHILIPS purchase is registered, you're ehglble to receive all the pnwleges of owmng a

PHILIPS product. So complete and return the Warranty Registration Card enclosed with your pur-

chase at once. And take advantage of these important benefits.

Warranty

Verification

Registering your product within

10 days confirms your right to

maximum protection under the

terms and conditions of your

PHILIPS warranty.

Owner

Confirmation

Your completed Warranty

Registration Card serves as

verification of ownership in the

event of product theft or loss.

Model

Registration

Returning your Warranty

RegistrationCard right away guar-

antees you'll receive all the infor-

mation and special offers which

you qualify for as the owner of your

model.

Congratulations on your purchase,

and welcome to the "family!"

PHILIPS

Dear PHILIPS product owner:

Thank you for your confidence nnPHILIPS You've selected one of the best-built,

ucts avadable today And we'll do everything nnour power to keep you happy with your purchase

for many years to come

As a member of the PHILIPS "family," you're entitled to protectnon by one of the most comprehensive

warranties and outstandnng service networks nnthe industry

What's more, your purchase guarantees you'll recenve all the information and special offers for which

you quahfy, plus easy access to accessories from our convenient home shopping network

And most importantly you can count on our uncompromising commitment to your total satisfaction

All of this usour way of saying welcome-and thanks for nnvesting nna PHILIPS product

Snncerely,

Lawrence J. Blanford

President and Chief Executive Officer

Remember, to get the most from your PHILIPS

product, you must return your

Warranty Registration Card within 10 days So

please mall it to us right hOWl

Know these

safetysymbo/s

_- TbEs bolt of lightning' indicates untnsulated material w=thln your unit may cause an electri-

cal shock For the safety of everyone in your household, please do not remove product covenng

,_k The exclamation point' calls attention to features for which you should read the enclosed

IEteratureclosely to prevent operating and maintenance problems

WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT

TO RAIN OR MOISTURE

CAUTION To prevent electric shock, match wEde blade of plug to wide slot, and fuUy insert

ATTENTION Pour evnter les chocs electnques, Entrodu_rela lame la plus large de la fiche darts la

borne correspondante de la prise et pousser ]usqu'au fond

IMPORTANT SAFETY INSTRUCTIONS

Read before operating equipment

16,

1, Read these instructions,

2, Keep these instructions,

3, Heed all warnings.

4, Follow all instructions.

5, DO not use this apparatus near water.

6, Clean only with a dry cloth,

7, DO not block any of the ventilation openings, Install in

accordance with the manufacturers instructions.

8, DO not install near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including amplifiers)

that produce heat.

9, Do not defeat the safety purpose of the polarized or ground-

ing-type plug. A poladzed plug has two blades with one

wider than the other. A grounding type plug has two blades

and third grounding prong. The wide blade or third prong

are provided for your safety. When the provided plug does

not fit into your outlet, consult an electrician for replacement

of the obsolete outlet.

lg, Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the point

where they exit from the apparatus,

11. Only use attachments/accessories specified by the manu-

facturor,

12, _ Use only with a cart, stand, tripod, bracket, or table

_ _pecified by the manufacturer, or sold with the ap-3aratus, When a cart is used, use caution when

mowng the cartJapparatus combination to avoid injury from

tip-over.

13, Unplug this apparatus during lightning storms or when

unused for long pedods of time.

14, Refer all servicing to qualified service personnel, Servicing

is required when the apparatus has been damaged in any

way, such as power-supply cord or plug is damaged, liquid

has been spilled or objects have fallen into apparatus, the

apparatus has been exposed to rain or moisture, does not

operate normally, or has been dropped,

15, This product may contain lead and mercury, Disposal of

these materials may be regulated due to environmental con-

siderations. For disposal or recycling information, please

contact your local authorities or the Electronic Industries

Alliance: www.eiae,org

Damage Requiring Service - The appliance should be

serviced by qualified service personnel when:

A. The power supply cord or the plug has been damaged;

B. Objects have fallen, or liquid has been spilled into the

appliance; or

C. The appliance has been exposed to rain; or

D. The appliance does not appear to operate normally or

exhibits a marked change in performance; or

E, The appliance has been dropped, or the enclosure

damaged,

11, Tilt!Stability -All televisions must comply with recommend-

ed international global safety standards for tilt and stability

properties of its cabinet design.

• DO not compromise these design standards by applying

excessive pull force to the front, or top, of the cabinet which

could ultimately overturn the product.

• Also, do not endanger yourself, or children, by placing

electronic equipment/toys on the top of the cabinet. Such

items could unsuspoctingly fall from the top of the set and

cause product damage and/or personal injury,

18, Wall or Ceiling Mounting - The appliance should be

mounted to a wall or ceiling only as recommended by the

manufacturer.

19, Power Lines - An outdoor antenna should be located away

from power lines.

20, Outdoor Antenna Grounding - If an outside antenna is

connected to the receiver, be sure the antenna system is

grounded so as to provide some protection against voltage

surges and built up static charges.

Section 810 of the National Electric Code, ANSI/NFPA NO,

70-1984, provides information with respect to proper

grounding of the mast and supporting structure, grounding

of the lead-in wire to an antenna discharge unit, size of

grounding connectors, location of antenna-discharge unit,

connection to grounding electrodes, and requirements for

the grounding electrode, See Figure below,

21, Object and Liquid Entry - Care should be taken so that

objects do not fall and liquids are not spilled into the enclo-

sure through openings,

INgle 1othe CAW systeminstaller: This reminder is provided to call the CAW system installer's attention to Article 820-40 of the NEC that provides ]

guidelines for proper grounding and, Jr1particular, specifies that the cableground shallbe connected to the grounding systemof the Duilding, asclose /

to the point of cable entry as practical. ]

ExampleofAntennaGrounding

as per NEC- National ElectricCode

GROUNDCLAMP

3 Rev. 8/13/01

INTRODUCTION

We]come/Registration of Your TV .................... 2

Safbty/Precantions ........................... _ "

• • .z,--.)

Features ........................................ 5

_ CONNECTING ACCESSORY DEVICES

TO YOUR TV

Jacks, CaNes, and Connectors ................. 6

Panel Overviews: Standard Inputs arid Ou_uts .......... 7

Panel Overviews: T-Tigh-definitionInputs ............... 8

Connecting a VCR ................................ 9

Connecting aVCR and Cable Box ................... 10

Connecting arid Using an Audio T-Ti-fiSystem

with Your TV ................................. 11

Connecting a S_tan_d DVD Player .................. 12

Connecting a DVD Player with ProgTessive-scan

Capability .................................... 13

Connecting an S-Video Device ..................... 14

Connecting an HD Receiver to the

HD INPUT-AV 4 Jacks .......................... 15

Connecting a Camcorder .......................... 16

Connecting arid Using Headphones

with Your TV ................................. 17

_ USING THE REMOTE CONTROL

?rogTammJilg the TV Remote to Work

with Accessory Devices ..................... 18

Using the Code-entry Method to Program Your

TV Remote ................................... 19

Using the Search Method to Progyam Your

TV Remote ................................... 20

Direct-entry Codes tbr AJN:Accessory Devices ...... 21-22

Using the TV Remote with Accessory Devices ......... 23

Using the AV and Source Select Buttons .............. 24

Using AutoSound TM .............................. 25

Using AutoPJcture TM ............................. 26

Using AutoSurf cu ............................... 27

Using ProgTam List and Alternate Channel (A/CH) ...... 28

Using the Sleep Timer Control ...................... 29

USING THE ON-SCREEN SUBMENUS

_ PICTURE

Adjusting the Picture Controls ............... 30

Setting the Eye Fidelity Control ..................... 31

Setting the Dynamic Contrast Control ................ 32

_ SOUND

Adjusting the Treble, Bass, and

Balance Controls ........................ 33

Using the AVL (Audio Volume Leveler) Control ........ 34

Selecting the Surround-sound Modes ................. 35

Selecting the Stereo/Mono Sound Mode .............. 36

Selecting the SAP (Second Audio Progran 0 Feature ..... 37

Using the Bass Boost Control ...................... 38

_ FEATURES

The Timer

Setting the Clock ................................ 39

Displaying the Time .............................. 4(1

Setting the Timer's St_ Time and Stop Time ......... 41

Selecting the Timer's Channel ..................... 42

Setting the Timer's Activate Control ................ 43

AutoLock TM

Understandklg AutoLock TM ....................... 44

Setting up the AutoLock TM Access Code ............. 45

Using AutoLock TM to Block Channels ............... 46

Using AutoLock TM to Block by Movie Rating ......... 47

Using AutoLock TM to Block by TV Rating ........... 48

Turning the AutoLock TM Blocking Control

on or off .................................... 49

Using AutoLock TM to Block Unrated Bro_tcasts ....... 50

Using AutoLock TM to Block Broadcasts That

Have No Rating ............................... 51

Reviewing Your Currrent AutoLock TM Settings ........ 52

Using the Closed Captioning Control ................. 53

Using the Picture-format Control ................. 54-55

Using Active Control TM ........................... 56

APPENDIXES

Appendix A: Compatibility Tnformation

for the TV's High-definition Tnputs ......... 57

Appendix B: Model Specifications ................... 58

Appeufftx C: S_;lng Color Space fbr the HD Iuputs ....... 59

IIUIIRIGENERAL INFORMATION

Care and Cleaning ............................... 60

Troubleshootklg .............................. 61-62

Glossary of Television Terms ....................... 63

Index ......................................... 64

Factory Service Locations ...................... 65-66

Limited Warranty ................................ 72

Refer to the simple Quick Use and Setup

Guide (supplied _ith your TV) for details

on the following:

• Basic TV cotmee'dans

• Tclcrqsion madremote-cant_ol operation

• On-screen menu controls

• How to lkqCthe installation features,

[['l[t2!_ i-1 . ii

As you unpack your T_, plcasc notc that this Directions fur Use

mannal contains safc_-fip information and Factory Service

Center locations, as well as a Warranty Registration Card,

remote control, and batteries tbr use _ith the remote control.

Please take a few minutes to complete your registration card. The

_ri_fl number for the TV is on the back of the set.

RetL_rto the back of this tnoznualfor testractlans in the cleaning

and care of the T_,'_

ActiveControlTM confinanasly measures anti corrects all ineom'mg

signals to pro_dde the best pfamro _ngs. This lbatm_ provides a

sharp and vil_ually enisc-ffe_ plamre a_y tlma, from any NTSC

source. NTSC is the Natlenal Tclcvisian Standerds _ttec for-

mat devlscd in the 1940s for TV broadeast analog video signals

(525 hues: 30 Hz),

Alternate Channel (AiCH) button allows you to switch back end

forth between the eurmntiy viewed channel and the p_Aonsly

viewed channel.

Automatic Phosphor Aging Compensation (APAC) works with

the se't's Autmnatic Format feature to prevent Mrecn bum left by

nanmoving images. Pcrlodically, APAC automatically shifts your

tcl_'ialen picture in very small increments, but in increments lergc

enough to bliw image retention. APAC is llkc a screen saver for

your T%<

AudioPddeo jacks allow direct co-dace'dens w_th VCRs and other

anccssorlcs for quality TV pie'0.un and _and playbank, (k,_mpoannt

video input jacks are provlded for high-fldefity color end picture

resolution when using dlgitoJ _Sdeo _urec matcrlal, s_h as a

DVD,

Audio Volume Leveler (AVL) control kaeps the TV's _and gt an

even level. Pc_ks and "_llcys that occur during prepare changes

or conmerclal breaks ere rcdoccd, making for a more censistcnt,

comfortable sound,

AutoChron TM automatically sets the right tlmc of day and r_ka-

tains it with digital procisian through brewnonts, power I_allures,

end even Daylight Savings Time adjustments,

AutoLoek TM proten'ts young children from objectionable prog_,an-

mlng with V-chip technology.

Automatic Format automatically de€toaststhe incotrfing signal's

format and adjusts it to fill the screen, Mac, your remote centrdi

has a Format button that allows you to sclcet the picterc format

you want to see,

AatoPicture rM allows you to push a bum,-n and adapt your TV's

picture to various types of pro_anw, such as sports, movies, and

mulamcdia (games),

AatoSound TM allows you to select from throe fantory-sct cent_dis

end a pcrs¢,_wJcant:rel that you sot according to your ow'n prcfar-

encas through the en-Mreen Sound submcnu. The throe fantury-sct

cent_ols---Voicc, Music, and Theatre---enable you to tailor the TV

_and to enhance the particular prog_mnmg you arc watching,

AutoSurt xM allows you to tasty switch asenng enly the channels

that am of interest to you. You can prog_,an up to 10 chmmcls into

the TV's AutoS_ _memory through the an-screen display.

Closed Captioning allows you to read TV prepare dialog or

voice cenvcrsath,-ns as en-scrocn t_t.

Virtual Dolby _ Surround (referred to as "Dolby Virtual" in the

on-Mreen submenu) _k_s two speakers to simufatc the surround

effect produced by a multichenncl syston.

I_jnamie Contrast helps you sharpen the picterc quality by nw&-

ing the cent_ast between the dark end bright pie'uun areas more

noticeable as the image an screen changes.

Eye FidcliV¢ gives you a choice botwocn two different pictere-

Manning tochniqucs--_ro_csalvc and interfaced, Progtcsalvc scan

deublcs the number of vislblc plcmm llncs per field,by displaying

all ple'0.un frame lines at enoc, climlnatlng line flicker. The inter-

laced mode provides for a double vertical di_lay (interlaced) of

progressive Man, whlch redancs annoying moti_ ertifants. The

interlaced mode also helps smooth out jagged lines somctlmcs

s_n on curved end engied surfaces,

ltD DVI and Component Input_--D%q supports High-defi_itian

Copy Protected digital video input for cotmocdon to compliant set-

top boxes, The component cotmce'den (Y Pb Pr or RGB +HV)

offers color purity, crisp color detail, and reduced color noise,

Hi-fi stereo system, including a built-in audio amplifier end a tw'in

speaker system. The system enables you to hcer stereo sound or

Sccend Audlo Pregnan (SAP) bilingual broadcasts whan they arc

,available.

Home-cinema universal remote control operates your TV set end

other dewlcas that work by infrared remote control, sanh as VCRs,

cable converter boxes, satellite receivers, and others. Note: You

may nocx_to prepare the remote to work with devices other then

the T%< Soc pages 18-23.

Incredible Surround TM enhances stereo pregnans by making the

sound broader end riffler.

Multipoint Digital Convergence (35 point) brings the accuracy of

digital technology for flawless convergence of red., green, andbluc

tubes, This allows the vi_ver to adjust as preferred to create a

superb ple'uun with minlimend, colored haloes.

On-screen menu shows the TV controls and allows you adjust or

set those controls (can be viewed in American Enghsh, French, or

Spa3tish).

Program List displays a list of year favorite channels at the press

of a button. You can Mroll through the list, highlight a favorite

channel, end tlmc to the channel.

Protective screen filter helps prevent accidental damage to the del-

icate front lcntienl_x Mreen. Thls proteetlvc fiber has been formulat-

ed for HI) all,lays to give the best picture and still protect your

investment,

Sleep Timer entmnatically amos the TV off after a set amount of

time of your chdicc,

Standard broadeast (VHF/UHI 0 or cable 'I_ _(CATV) channel

capability, as wall as advanced capability for high-det_tien video.

Three-line digital comb filter provides improved chrt_na!lumi-

r_nec sepamtien to the pie'0.un, Offcfiug vertical-edge enhancement

end vimmlly no "dot crawl," this filter cosily supports the demands

of DVD pfayers end other advanced high-resolutien video sources,

Two-tuner Picture-in-picture (PIP) allows you to tune to a pre-

g_,an in the main window and scan other channels in the PIP win-

dew. From a single antenna or cable input, signals arc separated

into two signals within the tclcvisien, so no external splitter is

required for PIP. The AVI, AV2, and AV3 inputs arc also available

as PIP _urecs,

As au E_y S_ Paztz_,_., lr_fi_ps Co_su_cr lQ¢c_zotdcs _as

_ dc_,'_mi_cd this product mc,,_ the Ene_'V Smr_ guiddS_es for

cncr_ cfficicmcy. Encr_ Sm_ is a U.S. zc_stcrcd mark. U_ing

prod_v,.s with the ] mcig,y Sta_ Lobe] ca_ s_ve energy. Savi_g

cn6_%_reduces air poH_ien a_d ]ow,_,_ utilffy b{Als.

Active Control, APAC, Auto PScezm, AutoSe_ud, AmoSur_, attd I:_c_bl¢

Susrotmd arc tr_dx,mmrkaof Phflip_ Consmr_,_, lilcc,tromcs North A_ca.

Copy6gh_ _ 2003 Phi_ps Co_a_c-r lflec_e_ics.

*Manu_.ur_,d tmd_-r ]1¢,_,_s¢ fro_ Dolhy _ather_oties. _i)olhy" at_ the

de_bl¢-D sy_hel aze _ademark_ ef Do]by I,abora_das.

Your new prejcefien televialen end its packaging contain materials

that can be recycled and reused. Spcci_diend, companies can rocy-

clc your product to increase the asnoant of re_tsablc mat_Sals end

_c the amounts that nocd to be properly di_oscd, The bat-

tcrics u_mdby your prodanf should not be thrown away whan

depleted but should be handed in and disposed of as small chaml-

col waste. Please l_d out about the local regaladens conccming

how to dispose of your old televialen, haCtcrics, end pa_aging

materials whanever it is time to replace them,

Connecting Accesanr_, Devlces toYourTV

_raiS page contains dea'eriplions and illas-

tkms of]aek_; cables, and conneetore

you might use in ma_ng connections, The

cables and connectors are tuft supplied with

your _ but you can purchase them at

store_'that sell electronies. Or you can

order t!_n _' calling our Castomer Care

Center at l-8(_-531-(_739.

DVl Jack

Cable used: DVI

Allows encrypted transmissions ofunanm-

pressed HI) content,

ComponentVideo Input Jacks

Cables used: component video or AIV

with RCA-Lype phone plugs

Allow you to cannot accessory devices such

as DVD playe_. Separating the video into

thr_ signals, these inputs provide excellent

quality. Be sure to cotmeet the left and fight

andJo cables, because the Y, Pb, Pr jacks

receive only the pin'0.un signal.

S-Video Jacks

Cable used: S-video

Providea higher quality pie'o.un than the Video

(composite) jacks because the color p_a"tof the

picture is s_aratod from the black and white

porEom Be sure to torment the left and right

andJo cables, because the S-Video jacks receive

only the pleture signal.

Video (called composite) Jacks

Cable used:A/V with RCA-type phone

plug

Provide be't_v picture performance than the

antenna RF input, Be sure to connect the andJo

cables, because the video jacks receive only the

picture signal.

Audio Jacks

Cables used:A_' with RCA-type

phone plug

Provide sound for the video inputs, If your

accessory device has only one output for audio,

connect it to the left (color coded white) andJo

jack on the T%<

Antenna RF Jack

Cables used: RF coaxlal cable (75_)

Allows you to torment an antenna, cable T_ or

components having _lly RF outputs to the

antenna input on the T%<RF coaxial cables are

available in push-on or screw-on type,

Signal Sp IiL_er

Allows you to route an antv_ma or cable TV

si_J to two inputs,

300- to 75-ohm Twin-lead Adapter

Accepts twin-lead wires from an anttxma and

allows connection to the antt,xma input on the

T%<If your anti,tuna is already eqmpped v;ith

an RF coaxial cable, you _vill not need this

adapter,

DVIJack

ComponentVidan Jacks

Cables Used:ComponentVideo or

ktV with RCA-_pe Phono Plugs

S-VIDEOJack

Cable Used: S-Vidan

Video (Composite) Jack

Cable Used:AN with RCA-_pe

Phone Plug

_Vl_O _l

Audio Jacks (Stereo Connection)

Cables Used:AN with RCA-wpe

Phone Plug

Audio Jacks (Monaural Connection)

Cable Used:A/X/with RCA-wpe

Phone Plug

AUDIO AUBI0

Antenna RFJack

Cable Used:RF Coaxial (75[])

Push-on Type

Screw-on Type

SignalSplitter

Cables Used: RFCoaxial ('/5_)

300- to 75-ohm Twin-lead Adapter

Connect?ng Accessory Dev?cestoYourTV

_u can connect a wide range of video and

udio components to your TI'_in various

ways. This page and the nat one provide an

overview of signal compatibilitius and the lypes

of components you can connect to the jacks.

Conneztian e_ples follow on subsequent

pages. Seepages l and 2 of the Quick Use and

Setup Cmide that came with your set for exam-

pies of busic cannections, You may also want to

r_fer to the user instructions that came with

each particular device for informatkm on can-

nectio_'.

WhatYou Can Connect to the

Standard Panel Jacks

&NTENNA IN 75K2jack--use to con-

rlect radio-t?eqoency (RF) signl_lsfrom

VHF/L_tF antermas or a cable sTstern.

These are 480i signals.

YPbPr (component *idan input [CNrI]

jacks)---compa?ib]e with 480i sigrl_s

orfly.Use to cormeet accessories having

component video ou_uts, such as DVD

players, laser-disc players, video-ganle

players, satellite receivers, or other

devices. Use the 1NPUT-AV 1L(eft) ar_j

R(igh0 AUDTOjacks fbr sound connec-

?ions. CWTcannot be displayed in the PTP

window.

S-VIDEO (super video) jacks---com-

pa?ib]ewith 480i sign,s only. Use to

cormeet accessories having Super VItS

(S-VItS) outputs, soch as VCRs, DVD

players, laser-disc players, video-ganle

players, satellite receivers, or other

devices.

VIDEO (¢omposile)jacks (INPUT-AV],

INPUT-AV 2, and TV's side jack panel

[AV3])--compa?ible with 480i sigrlfls

orfly.Use to cormeet _ccessories having

composite video omputs, sxtchas VCRs,

vidan-ganle players, or other devices.

AUDIO inputs ([NPUT-AV ],

INPUT-AV 2, and TV's side jack panel

[AV3])---use to corlr_et from the aodio

output jacks orl VCRs, DVDs, or oilier

accessories.

OUTPUT (VIDEO/AUDIO)--video is

compa?ible with 480i signals only. Use to

cormeet to a VCR to record pro_ams

from the TV: Ornse the AUDIO outputs

to connect to an audio hi-fi sysXegi.

_ Headphone jack--use to conrlectheadpboiles for persona] fistanblg.

Summary of signal compatibil?t_es

Compatible output signal

frorr= art external sourc:e

Input iacks on TV or accessory device

ANTENNA IN 75£), INPUT AV-%

INPUT AV-2, and side iack panel (AV3) 480i (480 lines, interlaced)

Side Jack Panel

NOTE:The

TV recognizes

the side jack

panel asAV3.

Sig_ls counected to the liD VNPUT-AV 4

or T-TD1NPLW-AV5 inputs w'dl provide

you with the best picture. Examples of

sources for such signa]s are a progTessive-

scan DVD player (480p) or arlliD receiver

(10SOi or 480p) with YPbPr or RGB out-

puts. The lOSOisibnmlswill provide you

with the best picture possible. Devices with

RGB outputs may or may not have H arid

V s:€_lcoutputs to counect to the T-TD

1NPLrr-AV 4 H and V SYNC inpms (see

page 57). Trlstractions for selecting file

liD VNPUT-AV 4 and AV 5 color space

(YPbPr or RGB) are on page 59.

Among the 480J-compatible inputs

(ANTENNA IN 7512, INPUT AV-I,

1NPLrr AV-2, and the side jack panel), you

will get the best picture from the compo-

nerlt video inputs (labeled YPbPr). The

S-Video inputs will provide the next-best

level of picture quality.

Connecting Accessory Devices toYour TV

WhatYou Can Connect to the

High-definition Input Jacks

lid INPUT-AV 4---use to connect dig-

Jtel equipment with a 1080i or a 480p

sig#al outpu_ such as T-SDreceivers

(1080i or 480p) or DVD players with

progressJve-scarl capability (480p). You

can connect equipment with YPbPr

cornporierit video or RGB outputs to

the HD INPUT-AV 4jacks. H arid V

sync cormections may or may not be

required for RGB connections. (See

page 59.) Dedicated audio input jacks

are located with the HD TNPUT-AV 4

video jacks.

NOTE: The PJcture-in-Pictt_e (PIP)

f_ture Js Ilct available for use with AV 4.

HD INPUT-AV .q-----useto connect digi-

tal equiprnant with DVI (digital video

Jrtteffaee) 1080J or 480p outpuL DVI is

a specitie digital input allowing

encrypted transmission of unoom-

pressed HI) annterlt. DVTJrtdiudes

HDCP (high-bandwidth digital content

pmtectiorl), which is supported by the

motion picture industry, satellite

pmvidars, and most of the consumer

electronics industry. DVI is gaining

momentum and quickly becoming an

industry Srnndard for the consumer to

view high-definitiert rrmteriul while

keeping eorttent protecxed.

NOTE: The PicCutre-in-Pieture(PIP)

feature is not available fbr use with AV5.

The TV's default color-spacesetdng fbr UD

1NPUT-AV4 is YPbPr,ffthe picture looks

g-a'ossly ineorrec%raycl_.mg_igthe color-space

settingon eitherthe ff_bfiv,d equipmar¢ orthe

T_, For more information on settingthe color

space on the digdtale_iprnenr_ see fae equip-

ment's directioris-for-usemanual. To setthe

TV's color spat_, see page 59 in this r_r_tual.

This television is designed to be enmp_ble

with [figh-defatitionsisal _v,m&_ 1080i

and 480p as speeified by the Elee_rfie

IadusUlesAssoe'_on sxan&_lEIA770,3.

Because ou_ut sv.m&_ may v',_.-by manu-

fuehrer, you may encounter somed'_dtal

equipment th_cwin not properly display pie-

rares on fae TV.

The PIP 0?ieare-ki-pieture) t_amre allows

you to tune to a program in the rnaln w'indow

and scan other charmels_ the PIP window.

From a single o:nt_a or cable input, signals

are separated into two signals within the tele-

vislom The AVI, AV2, and AV3 inputs are

alsoavailable as PIP _urees,

Summa_y of signal connpat_b_lities

Compatible output s_gnal

f_r_ _n ezl_ernal souroe

TV Input or device

_080i (1080 lines,interlaced) or

WD INPUT-AV 4 480p (480 lines,progressive scan)

HD INPU--AV 5

Digital video interface (DVI) with

_0801(_080 lines,interlaced) or

480p (480 lines,progressive scan)

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

Because DVI is such ilew technology, the

electrollics industry is still workkig toward a

decisJoi_ on oI_estandard. Philips testing has

determined that compatibility issues exist with

respect to a limited immbar of high-defillitioll

receivers when they are colmected to the DVT

input oil this television. If you should experi-

ence difficuities, please contact our Custorrmr

Care Cellter at 1-800-531-0039.

r_ TV;_,oudioivideo (A_ input.jac_' provide

1 f!_rdirectpicw.re and sound connections

between the TV and ance_sory devices such a,_

VCRs, D_D players, and others that have AVout-

put.jacks.

This'example, which _e_ the INPUT-AV I.jacks,

shom_you one way you can connect a VCR to

__ar Tg

Refer to the directions-for-u*e manual tbr >vmr

VCRforfp,a'tber information on connectio_.

Tomake the connections shown in this"example,

3_u will need:

• one coaxial cable (75_2)

• onecabletbravideoconnection(standard

RCA -t3pephonoplug)

• t_cabl_Ltbroudioconnectio_(standard

RCA-type phono plugs) (only one cable is"

neededfor a nonst_o VCR).

NOTE: The cable._"are not s_plied withyour 7_;

Youshould be able to buy them at most stores

that sell electnmics. Or you can call imr

C_tomer Care Center at 1-800-531-0039

Connect a cable TV or antenna signal

to the ANT IN jack on the back af the

VCR.

Connect from the OUT jack on the

back af the VCR to the ANTENTNAIN

7.r_ jack on the back af the T_:

Connect the VIDEO OUT jack an the

back of the VCR to the INPUT-AV 2

_qDEO jack on the back of the TV.

Cannecl the audio output R(ight) and

L(efl) jacks on the back of the VCR to

the INP[Tr-AV2 AUDIO jacks on Ihe

back of the T_:

NOTE: If the VCR is a mona (nons*emo)

refit, co_t only the left _o cable,

w[fich_naallyhas a white-coded plug,

Press the AV button on the remote can-trol as many times as neecssa_ to select

the AV2source for viewing of materials

from the VCR.

Back oqVCR

(example only)

[]

ConnectlngAccessory Devlces toYourTV

BackofTV

Stereo sound will pass from the ANT

OUT jack on the VCR to file ANTENNA

IN 75_ jack on the TV only when the

VCR is in TV mode. This is the mode

that _lows the TV to use its channel

selector.

To simpli_ making connections, audio

arid vkleocables often have color-coded

plugs. The jacks on your TV are likewise

color coded to match the plugs. The cod-

ing is as follows:

--Yellow for video (composite)

--Red for the right audio channel

--White for the let1 at_lio channel

NOTE: Zfyour VCR is mona (non-

stereo), you will connect only one audio

cable. You must ensure that the TV is set

to MONa for tile signml source to which

you've connected the VCR (1NPUT-AV 2,

1NPUT-AV 1, or the side panel inputs

[AV3]). Othenadse, you will receive

sound from only one of the TV's speakers.

See page 36.

You caa display the AV], AV2, or AV3 signal

sources in the PIP window. See page 7 of the

Quick Use and Setup Guide tbr i_ormation on

nsiag the l?icture-ia-Pictore (PIP) fbature.

Connocting Accessory Devices to Ynur "l"V

presented here is a connection example

involving a VCR and cable box.

Refer to the YCR i' direetionszfor-use manual

far further infoFmation on £;onnect_otK_'.

Tomake the connections in this _ample, yon

will need:

• one, two-w@' signal splitter

• two coaxial cables (75£1)

• one eable./br a v'ideo connection (standard

RCA-type p!_mo plug)

• two eable,_'f!_raudio connections (standard

RCA-t)7)e p!_mo plugs) (only one cable is

needed fiw connection to a nonstereo

VCR).

NOTE; The cables' are not svpplied with yovr

77,'.You s!_uld be able to buy them at mast

stores that sell electronics. Or you can call

out" Customer Care Center at

1-800-531-0039.

Connect a cable TV signal to a two-

way signal splitter.

Connect one of the two-way signal

splitter outputs to the CABLE IN

jack on the cable box.

Connect the other tw'o-way signal

splitter output to the ANTENNA IN

75K2on the back of the TV,

Connect from the cable box TO TV

jack to the ANT IN jack on the back

of the VCR.

Connect the VIDEO OUT jack on

the VCR to the INPUT-AV 2 _ql)EO

jack on the back of the T_;

Connect the AUDIO OUT R(ight)

and L(ef0 jacks on the VCR to

INPUT-AV 2 AUDIO jacks an the

back of the TV.

"It_eRF outputon a cable box, usually

labeled OLrI'PUT, OLTF, or qY3 T'v,

will not p_s a stereo sound si_ to the

ANTENNA ]N 750. jack on the T'v. _t;hov_'-

ever, your cable box has separate

Audio/Video outputs, t_ing A/V cables to

connect to tho_e untpu_sand to ",he,_,¢

inpu_;son the TV might p_s a _ereo sound

signal to the T'v. C_nract your cable 'YV

company for more ir_¢bmiadon.

NOTE: If the VCR is a nollstereo unit,

colmect only the le_ at_lio cable,

whJc_lusu_ly has a white-coded plug.

Press the AV button on the remote

control as many times as necessary

to select the AV2 source _or viewing

of materials from the cable box or

VCR.

@QQ

To simplifiimakin_ connections, the plub_

on atldioandvideo c_bles ate often color

coded. "Ittejaclc_artyour TV arelikewise

cdor code6 vamatch the pk_gs.

The coding is as follows:

--¥dlow for video (cornpo_te)

--Red for the right;audio channel

--Wbiie fortheleft at_diocbarmel

NOTE: T:t'yourVCR is mona (nortstere6),

you will connect ordyone ea_diocable.You

must e_t_trethat the TV is set to MONO for

the sibmalscarce to which you've cormected

theVCR (_PLIT-AV 2, RqPUT-AV1,orthe

sidepanel inputs _AV3]).Otherwise_you will

receive sound from only one of the TV's

speakers. See page 36.

yt_T can us'ekv)ur77_'3'AUDIO OUTPUTjacLs'

eotmect to an external audio hi-fi ,s3_s't_

Follow thesimple ._1epsbelong:

Tomake tbe._*eeotmeetio_, you will need two

cable._'.tbraudio eotmectio_ (standard RCA),

NOTE: The eable._"are not *_plied withyour 7_:

Youshould be able to buy them at most stores

that sell electronics, Or you can call _mr

Cg_tomer Care Center at 1-800-531-0039,

conmxt from the L(eft) and R(igh0AUDIO OUTPUT jacks on the back of

the TV te ate L(_) and r(igh 0 AUXtln¢

INPUT jacks onthe back offile hi-ti sys-

[Pill.

See the section below on using the

AUDIO OUT control.

A fle_ connecting the TV_ _AUDIO OUTPUT

]aelcs_to the AUDIO 17¢PUT]aelcs_on an

_ernal hi-fi ,Wst_, set the AUDIO OUT

czm_l in the SO_WD submenu to either

VARIABLE or FIXED to determine whether

.)_m adjust the vol_e at the 77"or at the

_ernal hi-fi _Wst_. To change the volume at

the TVusing the TV'_s_remote control, you must

select VARIABLE. To adjust the _vlume at the

stc_,eo using the hi=[i_ controls; you must select

F17_D. You can also use t_ SPEAKERS

c<mtrol in t_ SOUND _s_bmenu to turn t_

TV_ speakers off:

Press the MENU/SELECT button

on the remote control to show the

on-screen lnenu,

Press the CURSOR RING DOWN

once to highlight SOUND.

Press the CURSOR RING RIGHT

to enter the SOUND submenu.

Press the CURSOR RING DOWN

repeatedly until AUDIO OUT is

highlighted.

Press the CURSOR RING LEFT or

RIGHT to set the AUDIO OUT to

either VARIABLE or FLXED.

Ifyan want to turn the TV's internal

speakers off, press the CURSOR

RING DOWN repeated?r*until

SPEAKERS is highlighted. Then

press the CURSOR RING LEFT or

RIGHT to turn the speakers off.

Press the STATUS/EXIT button to

exit the menu.

Connect?ngAccessory Devices toYourTV

Back o'f"'V

• PICTURE TEEBLE

m BASS

• FrMU_ES BALANCE

IBC_'SUB_OUHB

S_UHD

• BASS

• BALANCE

• AVL

• IBCE'SUBEOUHB

SOUHB

IHCB*SUBBOUHB

• B[_UPHOH[

• STEB[O

• SAP

PHILIPS

S_UHD

BEAUPBOHE

• SAP

• AUDIOOUT

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiH ii iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

The sound outputs from the TV to an exter-

nal hi-fi system are not affbcted or tailored

by the TREBLE, BASS, BALANCE, AVL

INCR. SURROUND aridBASS BOOST

controls ]_lthe TV's SOUND submeun.

Connecting Accessory Devices toYourTV

Ci_,mponent video inpuLs_allow the h_gbe_'tpos-

ible color and pictum resolution in the play-

back qf digital signaLL,w,ch asthose ofD_D

players. The color d_[f&encesignaL__(Pb, Pr) and

the luminance (t) signal are cannected and

received separatel3v:The re,gdltis better color

bandwidth iqtbrmation than is t_)ssible with com-

pasite video (labeled VIDEO onyour TV:_jack

panel) or S-Hdeo connectio_.

Tomake the connections shown in this"example,

3_u will need:

• tbreecable._'Jbrvideocannections(*'tandard

RCA-type pbono plugs)

• tvmcabl_*'tbroudioconnectio_(standard

RCA-type pbono plugs).

NOTE: The cable._"are not *_plied with your TE

You should be able to buy them at most stores

that sell electorates. Or you can call _mr

C_tomer Care Center at ]-800-531-0039.

Connect the YPbPr (componen 0

VIDEO OUT jacks from the DVD play-

er to the INPUT-AV 1YPhPr (compo-

nent video) jacks on the back of the T_:

NOTE: The INPUT_AV1YPbPr jacks

will accept 480i (interlaced) output sig-

mfls only. The connection example on this

page assumes the use ofa DVD player

With irlter]aced output, Some OVD play-

ers, however, have YPbPr outputs tha_can

be switched between inter_ed and pro-

gr_ssive semi.If you are attempting to use

a DVD phyer with proggessive-scan

(480p output) eapaNlity to m_ the con-

neetion shown in this example, you mus_

be sure to s_tch the DVD phyer to inter-

laced. Tfuecess_-, r_ferto the DVD phy-

er's directions-for-use rt_nual tbr help. If

you wur_to use the DVD phyer ki pro-

gr_ssive-scan mode, you must use the

HI3 INPUT-AV4 jacks (see page 13),

Canncet the AUDIO OUT L(efl) and

R(igh0 jacks from the DVD player to

the INPUT-AV 1AUDIO jacks on the

back of the "lB,:

Press the AV hu_n on the remote con-

trol as many times as necessa_ to select

the C_T (component video input)

source on the TV,

Tunl the DVD player on and press

PLAY to view the DVD program on

the TV

Back of'W

Back o'_ DVD

(example only)

[]

®®

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

• To sirnpli_-m_iag connections, the plugs on

_o and video cablesare oftencolor coded.

The jacks on your TV are likewise color

c_]ed to match the plugs,

• The _iamesfor the compouent video jacks

may fflfferdepeml'mgon the DVD p'layeror

acuessur.- digivalsource equipment used. For

example, besktesYPbPr, you may soe

R.Y/B-Y/Y; or L_CbX Althoughabbrevia-

tions midterms may vary, the letters Banti R

stand ibr the blue antiredcolor component

signals, respectively,anti Yindicates the lmm-

nanee signal, H'necess_J, retbr to the direc-

tions-for-use mmalal fbr your DVD or digdtal

acuessur.- formore kfformatior_

• You emi alsoeonnee_a satellite receiver to the

TV ki a i_iuer skni'larto the exmnple shown

on this page. If you corot a swgllitereceiver

to the TV, you will ueed to use the receiver's

d_mel-rnernori,ration system to storeehan-

uels in the reeeiver's memory.

• If'you experience difficultiesreceiving sound

with a DVD disc,cheek the sound settings

through the DVD disc's menu.

• The CWTsource cmmotbe disp'layedin the

PIP wkidow. See page 7 kithe Quick Useattd

Setup Guide fbrmore on the PIP f_a_re,

To prevent uneven picture-tube a_lg, do not

leave nonmoviag knages or picture borders on

the screen *br an exxended period. See page 60.

Conne_ngAccessory Devices tx_YourTV

Z_he Jbllowing instructions _plain how to

annect a D_/7) player with progre, s;_qve_can

capability to the HD 1NPUT-A V 4 jacks on

your 77(

Tomake the connections, you will need:

• threecable._'Jbrvideocannections(_'tandard

RCA-type phano plugs)

• tv_cabl_'tbraudioconnectio_(standard

RCA-type phano plugs).

NOTE: The eable._"are not s_pplied with your 7Y:

Youshould be able to buy them at most stores

that sell electronics. Or you can call our

C_tomer Care Center at ]-800-531-0039.

Conneel from the "tTrPb jacks on

the back of the DVD player to the

HD INPUT-AV 4 Gff, R_/Pr,B/Pb

jacks on the back of the T$:

Connect from the L(efi) and R(ight)

AUDIO OUT jacks on the back of the

DVTI player to the lid INPUT-AV 4

AUDIO L(eit) and R(ight) jacks on the

back of the IT.

Make sure the DVD player is in pro-

_ressive-scan mode. You will not get a

viewable piclure througl_ ti_eHI)

INPUT_AV4 jacks if the DVD player is

in interlaced mode.

For more informalion on placing your

DVD player in progressive-scan mode,

see the DVD player's directions-for-use

manual Also, see the Helptill Hints to

the fight. The way in which progn'es-

sive-scan mode is selected varies among

DVD players.

Press the AV button on your TV remote

control as many times as necessary to

select the AV4 siffaal source.

Turn the DVD on, insert a disc, and

press play to view aDVD on the T$:

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

If you experience difficulties receiving

sound with a DVD disc check the sound

settings through the DVD disc's menu.

To prevem uneven picture-tube aging, do ant

leave ann-moving [trlagesor picture borders on

the screen tbr artextended period, See page 60,

Backof DVD

(exampleonly)

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiNN iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

If atler cormeefmg your DVD player your

display is filled Wi]_lwavy lines, it may be

that your DVD player is not set to progres-

sive-scan mode, Some DVD phyers have an

I/P (klrerlaced/prog_essive scan) switch

located on the back or from oft_leplayers for

changing f_ominterlaced to progressive-scan

mode, Other DVO players may allow the

mode to be changed by pressirlg a bI_n On

t_leDVD player's remote control or by ttSirlg

t_leDVD player's on-screen menu. If the

interlaeed!progressive- scan seleetian

option is provided only through the DVD

O]l_Screen mellU, you will ]feed to _onlleel:

the DVD player to another AV input

source in addition to FID INPUT_AV4 to

see the DVD menu. Select this additional

AV source on screen to see the DVD menu

and choose progressive-scan mode. You

will then be able to see the DVD picture

through the AV4source.

Some DVD players have dedicated progres-

sive-scan outputjacks that are labeled as

SIJ_hand require no switehklg to provide a

pic_Ye _iFOU_I the HI) INPUT-AV4 jacks.

See your DVD player's d'weetions-for-use

r_nual tbr information.

The default color-space se_lg for the

ED TNPUT-AV4 jacks is YPbPr. RGB is

also an opfior_ If the picture's color looks

,grossly incorreet, try cNmgklg either the

DVD player's or TV's color-space s_img.

See the DVO player's directions-for-use

r_rantmlfbr hffomrafion on seWmgits color

space, Or see page 59 kl this rcarloal 1;oset

the TV's color space.

The Picture-in-Picture (PIP) feature does

not function with AV4 orAV5.

Connecting Accessovy Devlces toYourTV

_ S(uper)-_deo connection on the back

d side panel) _i'the 771can give you better

picture detail and elarityJbr the plgcback of S-

_q:IS VCR tapes or D_7_ than the normal anten-

na (RF sigmaO or Ftdeo (composite) picture con-

nections. The egample given eonneeLs' a

D}_NCR Combi unit to the INPUT-AV 2 jacks

on the back _t'the 774

NOTE: The ace_s'sorydevice must have an

S-_qDEO output jack to make the connection

explained on this page.

Tomake the eonnactions,you will need:

• one S-Hdeo cable

• tv_cabl_sltbroudioconnactio_(standard

RCA-type pbono plugs).

NOTE: The eable,_"are not *_gopliedwithyour TE

Youshould be able to buy them at most stores

that sell elactmnics. Or you can call _mr

C_tomer Care Center at !-800-531-0039.

Connec! the S-VIDEO OUT jack on the

back of the accessory device with

_VIDEO oulput to the INPUT-AV 2

_VIDEO jack on the back of the "1%:

Connec! the DVD/VCR AUDIO OUT

jacks on the back of the accessory

device to the INPUT-AV 2 AUDIO input

jacks on the back of the "1%:

Press the AV butten on the remote con-

trol as many times as necessary to select

the AV2source on the T_:

Turn the accessory device on and press

play to view the video source material

(DVD or videotape, for example) on

the TV.

Back of TV

Back of Device with S-Video Output (example only)

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

• To smlplil_ makirlg connections, audio

cables are often color coded: red for the

right charlrlel, aridwhite for the left chan-

nel. The jacks on your TV are likewise

color coded to match the plugs. To make

S-Video corlrlectiorls, you must use arl

S-Video cable.

• You can also connect a satellite receive_

laser-disc player, video-game playe_ or

other accessory device with S-Video

capability to the TV in a manner similar

to the example shown on this page.

• If you connect a satellite receiver to the

you will need to use the receiver's

charmel-memorizafion system to store

charlrlels Jrlthe receiver's memory.

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

Video sources that show a constant non-mov-

izigpatte_l oil the TV acreezi can cause pic-

ture-tube damage. When you are Ilot nsing

your video accessory devices, turnthem or1:

Also, regularly altenlate the use of accessory

video sources with ilormal TV viewing. See

page 60.

_tal equipmentwith a 1080i or 480p output

compatible with the liD INPUT-AV 4

video.jacks.

NOTE: This,television is"designed to be computi-

ble with h_gh-definitionsignal standard_ 1080i

and 480p a_specified be'the Electronic Industries'

Association standard EIA770.3. Because output

standards may vary be'manufac_'er, you may

encounter some digital equipment that willnot

properly display pictw_ on the 7_:

Tomake the connections'shown in this"example,

)_a will need:

• one S-I¢_deocable

• threeeable,_'Jbrvideoeonneetions'(s'tandard

RCA-type phono plugs)

• four eable,_'Jbraudio connections' (standard

RCA-type phono plugs)

• one coa,xid cable (75_2).

NOTE: The cable,_"are not s_plied with y_mr 7_:

Youshould be able to buy them at most stores

that sell el*_ronics. Or you can call our

C_tomer Care Center at 1-800-531-0039.

Cu]raeet S-_qDEO and audio ¢abl_.NOTE: This exmnple uses

FNPUT-AV]. _bu can use FNPUT-AV2or

the sidekiput jacks if'you vcant.

• Coraiec¢an S-VIDEO cable fi'omthe HI)

receiver's S-VIDEO jack to the TV's

NPUT-AV 1 S-VIDEO jack,

• Coraie_ _om the HD receiver's AUDIO

anti jackstotheTV's

TNPUT-AV1L(eff) and n0ght) AUDIO

jacks.

Co]racer€ompmrentvideo and audiocables to the TV's FIDinputs.

• Coraie_¢fi'omthe YPRPB jacks on

the HD receiver to the TV's HI)

7qPUT-AV4 GF'_,R/Pr, B/Pb j'_s.

• Connev__om the HI3reeeiver's AUDIO

L(etl) and R('tght)jacks to the TV's HI)

7qPUT-AV4 L(e_) and R0ght) AUDIO

jacks.

Co]racer€oa_tl cables.

• Conoe_; *}le cO_'lal cable l_ad-irl flora

your cable outlet, cable converter box, or

VEF/UI_ anterau.ttothe IN FROM

ANTjack on the HI) reeeivec,

• Coraiev_a ooaxialcable from the OUT

TO TV jack to the ANTENNA IN 75_=_

jack on the T',L

• Conne_ the eo_ial cable l_l-in flora a

satellite dish antenus tothe SATELLITE

7_ jack on the HD receiver.

RetbrIo fire direetions-tbr-usemanualthat came with Ihe lad receiver for setup

inslruction_

[]

Cable TV or

(example only) Antenna Signal

Connecting Accessory Devices toYour TV

Signal

_rom

Satellite

Dish

NNN

HD receivers will supply stereo sound to the TV only through the audio

left and right cables, not through the coaxi_ cable.

Making a sVandard connection along with file HD connection as shown

Jn the example (S-VTDEO) on this page will allow you to see file receiv-

er's on-screen menu and a picture (vMid signal) from the receJvar should

Jt be swJtehed to SD mode.

The HD TNPUT-AV 4 jacks are for standard RCA-type phono plugs.

Your HD receiver may use RCA or BNC outpm jacks. If yo_tr HD

receiver comes with BNC jacks you will need to purchase BNC-to-

RCA adapters to connect the receiver to the TV. You should be able to

purchase these adapters at most stores that sell electronics. Or you can

cNl our _2NstornarCare Center at 1-800-531-0039.

BNC-to= BNC Adair

RCA Cor_r_c,_to e Ficicc,d to

Ad_p_e_' Col'll'l/x-_jo rl

RCA

_onn_c_of

The TSDINPUT-AV 4 jacks arecompatible with some digital equipment

having RGB ou_ms with "sync on green' or RGB with "separate H and V

s3mc."Output s_s for digital equipment, however, may vary by trianu-

facturer.No industry s_s have been esteblJshed tbr lid television RGB

signal s3,_Xe_ls,thning, s3,nchronization, aridsign_ strengths. If the digital

equipment you want to connect to your TV offers both component video arid

RGB outpuIs,component videe is the stNgested connection to use.

The default color-space setting for the HD TNPUT-AV 4 jacks is Y-Pb?r.

RGB is Mso an option. If the picture color looks grossly incorrect, try

changing either the receiver's or TV's color space. See the receiver's

directions-for-use manual for information on setting its color space. Or

see page 59 in this manuM for setting fie TV's AV4 color space.

AV4 arid AV5 do not fi.mction with the PIP feature. They cannot be dis-

played in the PIP window, nor can the P_P window be displayed when

those sJgnla_sources are being viewed on the main screen.

Connecting Accessory Devices toYour TV

The side panel.jacLs'previde a convenient way

I Jbr you to connect a camcorder toytmr TE

Theside paneljacLs' are recognized byyour 77/

as'AY3.

Youcan obtain S-ItTDEOquality with an S-FTIS,

Hi-& or digital camcorder by connecting to the

S-IqDEO inpat i_tead of the IqDEO (composite)

Tomake the connections shown in this"example,

)_u will need:

• an S-_qDEO cable

• tw_cabl_s'tbroudioconnectio_(standard

RCA-type pbano plugs).

NOTE: The cable,_"are not *_plied withyour TE

Youshould be able to buy them at most stores

that sell electnmie/_.Or you can call _mr

C_tomer Care Center at 1-800-531-0039.

Connect from the S-VIDEO output on

the camcorder to the S-VIDEO input in

the TV's side pand.

Connect from the AUDIO outputs on

the camcorder to the side panel AUDIO

L(efl) and R(ight) inputs.

Press the AV bulton on the remote can-

trol as many times as necessary to select

the AV3source on the TV for the view-

tug of materials from your eamcorder.

Typi_l

CNI1C_I'd _T"

®©©

I I

IDHILIPS

To simplJl_ making connectioils, the plugs

on aadio cables are ofteil color coded: red

for the right channel, and white for the ]eft

charmel. The jacks on your TV are ]JkewJse

co]or coded to match the p]ugs. To make

S-Video collilectJolls, yoK I?ilKS_!Ise all

S-Video cable.

Connecting Accessory Devices toYour TV

The 77@side panel ha__a headphonejack Jbr

personal listening,

Insert the headphone plug into theheadphone jacE ,_. in the TV's side

panel.

Turn down the TV's volume or pressthe Mate button _ oli the remote con_

trol to turn off'the TV's interalalspeak-

ers. See the section below for infomartion

ori oddtjus_ headphone volanle arid bal-

ar'tee,

NOTE: The headphone knpe_e must

be between 8 arid 4,000 ohms. The head-

phone jack is stereo and 3.5 ram in size.

Side J_k P_r,_l

T4jHEADPHONE controls a(low you to

ust the volume and balance of the

sound going to the headphone_ _.

Press the MENU/SELECT button

on the remote control to show the

on-screen Iuenu.

Press the CURSOR RING DOWN

once to highlight SOUND.

Press the CURSOR RING RIGHT

to enter the SOUND submenu.

Press the CURSOR RING DOWN

repeatedly until HEADPHONE is

highlighted, Then press the CLIRSOR

RING RIGHT to enter the

T_ADPHONE submenu.

Press the CURSOR RING DOWN

or UP to highlight VOLUME or

BALANCE, Then press the CURSOR

RING LEFT or RIGHT to adiust the

control.

Press the STATUS/EXIT button to

exit the menu,

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiHK ii iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

The AVL, TNCR. SURROUND, and BASS

BOOST contro]s do itot _ctiolt with the

headphones.

• PICTUNE TREBLE

• FE_!INES _LANCE

• INSTALL AVL

INCR-SURNOUND

®®®®

®®

®@®

PHILIPS

SOUND

ill

SOUND

• TREBLE VOLUHE

• BASS BALANCE

• BALANCE

• INCN'SURNOUND

SOUND

HEADPHONE

• _LANCE

SOUND

HEADPHONE •

• VOLUME

Using the Remote ControI

y;ur 77Zremote is capable of working not

nly your TV but also other infrared

remote ([R) controlled accessory devices

such as VCRs, cable 77/converter boxes,

satellite receivers, D FD players, and laser-

disc pFt_ers.

If you want to use ),oar TV remote to oper-

ate a VCR or other accessory devices, you

will need to perJbrm the initial check

explained in this section. You may also need

to go to the sections on the "Code-entry

Method" and the "Search Method" in the

pages that follow.

Press the VCR or ACC(essory)

mode button on the TV remote for

the desired product category.

NOTE: Pres_ the VCR mode button

allows access to product codes for

VCRs. Pressing the ACC(essory) mode

button allows access to the product

codes for cane TV converters, satellite

receivers, DVD players, and laser-disc

players.

Point the TV remote toward thedesired accessory device and press

the POWER button.

Does the remote turn the accessory

de_qee on?

If yes, stop aridtry other function but-

tons on the TV remote. With a VCR,

for example, try the Nay, Stop, and

Rewind buttons, for example. (See

page 23 for information on how the

remote buttons correspond with acces-

sory device functions.) Tfthey also

work the accessory device, then the

remote is ready aridno farther steps

are needed.

If not, do the following:

Look up a four-di[_t remote code

number on pages 21 or 22 for your

brand of accessory device. Than go

through the simple steps for entering a

four-digit code as expl_ed on

page 19.

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii ii iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

If more than one tour-digit code numbar is

listed, you may have to try more than the

first numbar given to locate your compo-

nent's correct code.

Cable Convart_r Box

DVD Nal_r

VCR

®®®

I_IllUPS

XOdW that _'ou have looked up the fbur-

igit remote-control Direet-ent_ _Code

,lbr your brand of accessory device you are

tea@ to lbllot_' the simple steps shown below

to program your TV remote.

Please read through all the *_eps befbre

beginning,

First, press and hold down the VCR

or ACC (for an accessory de_ice

other than a VCR) mode button on

the TV remote, Then press and hold

down the MENU/SELECT button at

the same time for a brief trioment.

Release the buttons. The TV retriota

back light will switch on.

NOTE: For correct operation, you

trmst first press and hold the triode

button and then press arid hold the

MENU/SELECT button shriulta_ous]y.

Within 30 seconds of pressing the

VCR (or ACC) button and

MENU/SELECT button, enter a

four-digit code for the accessory

device (see pages 21 and 22),

If you make a trlistake while attempt-

Jng to enter the four-digit code and

want to start again, press any button

other than one with a number. Then

return to step 1 to begin again.

Point the remote at the aecessor?,"device. Then press the POWER bu_on

on the remote to turn the device on.

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiNN iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

- Tfyou do not enter a complete code within

30 seconds, you will need to perform step

1 of the Code-entry Method again.

- Tfyou enter triore than four digits, the unit

will retain the first four digits entered.

- If the procedure explained above does not

work the first time, repeat the steps using

the same remote code number.

- If after a second try the remote does not

operate your accessory device, aridmore

code numbers are listed for your brand,

use the next listed code nttmber.

- If altar repeated attempts the Entry-code

Method does not allow you to work your

accessory device with your TV remote, try

the Search Method explaMed on the next

page.

Using the Remote Control

Cable Comc_rt_r Box

DVD Player

Immmmml immnmnmm: I

VCR

®®®

®@@

PHILIPS

Using the Remote ControI

yOac_r TV remote _:an be set to work various

eessory devices (VCRs, cable convert-

ors, and satellite receivers, fiw example) by

what is called the Search Method.

NOTE: The Search Method works only with

devices equipped with channel-display indi-

cators on the devices th_'elves or the abili-

Iy to show channel numbers on the TV

screen, If the Code-enttT*' Mettu_d (shown in

the previow*' section) did not enable your TV

remote to work your accessory' device, then

,[bllow the easy steps listed bekm: Please

read the steps once before performing them,

Turn on the desired device. Press

and hold down the VCR or ACC

(for an accessmT¢ device other than

a VCR) mode button on the TV

remote, Then press aridhold d_wrl

the SURF button as you hold down

the desired triode (VCR or ACC) but-

toll,

NOTE: For correct operation, you

must press and hold down the desired

mode (VCR or ACC) button t_st arid

then press aridhold down the SURF

button second.

While holding down the SURF and

the desired mode (VCR or ACC)

buttons simultaneousl% point the

remote toward the accessory device

and continue holding the buttons

down.

Watch the Channel Indicator on

your accessory device. Cha_el num-

bers wJl] scan up when the TV remote

has identified the correct code for

your accessory device. This may take

several trfinutes.

Release the mode (VCR or ACC)

and SURF buttons as soon as chan-

nel numbers start to scan up. The

scarming trieans that your TV remote

has found the code for your accessory

device.

NOTE: T:t'nochannel change happens

_r several trfinute_,repeat steps 1 and

2. Then ira chapel change stilldoes no*

occur, therernccewill not work with the

desired accessory device.

Satellite Receiver

Cable Conwr_r _x

VCR

®®®

®®

PHILIPS

iiiiiiiiiiiiiiiiiiH iiH iiiiiiiiiiiiiiiiiii

The remote's back light will blhtk

theremote moves through its

prodt_t code list. ,M_r the remc,m

Jdertti:tiesthe prodtml;code for

your accessory device and you

release the remote bu_ons, the

b_k light will blink _vice.

Your TV remote mW lt_cate*,he

accesmry dm,-ice'scode quickly or

within several mint_e_.

Don't let the accessory d_ice

scan up more than five channels

when the correct code is fotm_

the remote may p_s up the fight

code and have m repeat the seareh

cycle.

Page is loading ...

Philips 55PW936317F Owner's manual

Brand: Philips

Model: 55PW936317F

Category: LCD TVs

Type: Owner's manual

This manual is also suitable for

51PW9363/17

Download PDF

report

Philips 55PW936317F Owner's manual

This manual is also suitable for

Philips 55PW936317F Owner's manual

Related papers

Other documents