Pro-Max SUPER X5DAL-G User manual

Brand: Pro-Max

Model: SUPER X5DAL-G

Category: Server/workstation motherboards

Type: User manual

SUPER X5DA8

SUPER X5DAE

SUPER X5DAL-G

SUPER X5DAL-TG2

USER’S MANUAL

Revision 1.1c

SUPER

The information in this User’s Manual has been carefully reviewed and is believed to be

accurate. The vendor assumes no responsibility for any inaccuracies that may be

contained in this document, makes no commitment to update or to keep current the

information in this manual, or to notify any person or organization of the updates.

Please Note: For the most up-to-date version of this manual, please

see our web site at www.supermicro.com.

SUPERMICRO COMPUTER reserves the right to make changes to the product described in

this manual at any time and without notice. This product, including software, if any, and

documentation may not, in whole or in part, be copied, photocopied, reproduced, translated

or reduced to any medium or machine without prior written consent.

IN NO EVENT WILL SUPERMICRO COMPUTER BE LIABLE FOR DIRECT, INDIRECT,

SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR

INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, THE VENDOR SHALL NOT HAVE

LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE

PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,

INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of

Santa Clara County in the State of California, USA. The State of California, County of

Santa Clara shall be the exclusive venue for the resolution of any such disputes.

Supermicro's total liability for all claims will not exceed the price paid for the hardware

product.

Unless you request and receive written permission from SUPER MICRO COMPUTER, you

may not copy any part of this document.

Information in this document is subject to change without notice. Other products and

companies referred to herein are trademarks or registered trademarks of their respective

companies or mark holders.

Printed in the United States of America

iii

Preface

About This Manual

This manual is written for system integrators, PC technicians and

knowledgeable PC users. It provides information for the installation and use

of the SUPER X5DA8/X5DAE/X5DAL-G/X5DAL-TG2 motherboard. The SU-

PER X5DA8/X5DAE/X5DAL-G/X5DAL-TG2 supports single or dual Intel

604/603-pin Xeon

processors at up to 3.20 GHz at a 533/400 MHz front side

bus. Please refer to our web site (http://www.supermicro.com) for up-

dates on supported processors. This product is intended to be profession-

ally installed.

Manual Organization

Chapter 1 begins with a checklist of what should be included in your

mainboard box, describes the features, specifications and performance of

the motherboard and provides detailed information about the chipset.

Chapter 2 begins with instructions on handling static-sensitive devices.

Read this chapter when you want to install the processor and DIMM memory

modules and when mounting the motherboard in the chassis. Also refer to

this chapter to connect the floppy and hard disk drives, the IDE interfaces,

the parallel and serial ports, the keyboard and mouse, the power supply

and various control panel buttons and indicators.

If you encounter any problems, see Chapter 3, which describes trouble-

shooting procedures for the video, the memory and the setup configuration

stored in CMOS. For quick reference, a general FAQ (Frequently Asked

Questions) section is provided. Instructions are also included for contact-

ing technical support. In addition, you can visit our web site for more

detailed information.

Chapter 4 includes an introduction to BIOS and provides detailed informa-

tion on running the CMOS Setup utility.

Appendix A gives information on BIOS POST messages.

Appendix B provides BIOS POST codes.

Preface

About This Manual ...................................................................................................... iii

Manual Organization ................................................................................................... iii

Chapter 1: Introduction

1-1 Overview......................................................................................................... 1-1

Checklist .................................................................................................... 1-1

Contacting Supermicro............................................................................ 1-2

Super X5DA8 Image................................................................................ 1-4

Super X5DAE Image................................................................................ 1-5

Super X5DAL-G Image............................................................................ 1-6

Super X5DAL-TG2 Image ....................................................................... 1-7

Super X5DA8 Layout .............................................................................. 1-8

Super X5DA8 Quick Reference ............................................................ 1-9

Super X5DAE Layout ............................................................................ 1-10

Super X5DAE Quick Reference .......................................................... 1-11

Super X5DAL-G Layout........................................................................ 1-12

Super X5DAL-G Quick Reference ...................................................... 1-13

Super X5DAL-TG2 Layout ................................................................... 1-14

Super X5DAL-TG2 Quick Reference.................................................. 1-15

Motherboard Features .......................................................................... 1-16

Intel E7505 Chipset: System Block Diagram...................................... 1-18

1-2 Chipset Overview......................................................................................... 1-19

1-3 Special Features........................................................................................... 1-19

BIOS Recovery....................................................................................... 1-19

Recovery from AC Power Loss ......................................................... 1-19

1-4 PC Health Monitoring.................................................................................... 1-20

1-5 ACPI Features ............................................................................................... 1-21

1-6 Power Supply ............................................................................................... 1-23

1-7 Super I/O........................................................................................................ 1-23

Chapter 2: Installation

2-1 Static-Sensitive Devices ............................................................................... 2-1

Precautions............................................................................................... 2-1

Unpacking.................................................................................................. 2-1

2-2 PGA Processor and Heatsink Installation .................................................. 2-2

2-3 Installing DIMMs............................................................................................... 2-5

2-4 I/O Ports/Control Panel Connectors............................................................. 2-6

Table of Contents

SUPER X5DA8/X5DAE/X5DAL-G/X5DAL-TG2 User's Manual

Table of Contents

2-5 Connecting Cables .......................................................................................... 2-8

ATX Power Connector............................................................................ 2-8

Processor Power Connector................................................................. 2-8

NMI Button ................................................................................................. 2-8

Power LED................................................................................................ 2-8

HDD LED .................................................................................................... 2-9

NIC LED ...................................................................................................... 2-9

Overheat LED ........................................................................................... 2-9

Power Fail LED ........................................................................................ 2-9

Reset Button........................................................................................... 2-10

Power Button ......................................................................................... 2-10

Chassis Intrusion ................................................................................... 2-10

Universal Serial Bus (USB0/1) ............................................................ 2-10

Extra Universal Serial Bus Headers (USB2/3) ................................. 2-11

Serial Ports ............................................................................................. 2-11

GLAN (Ethernet Port)............................................................................ 2-11

ATX PS/2 Keyboard and Mouse Ports............................................... 2-11

Fan Headers........................................................................................... 2-12

Power LED/Speaker Header (JD1) ..................................................... 2-12

Third Power Supply Fail Header ......................................................... 2-12

Wake-On-LAN ........................................................................................ 2-13

Wake-On-Ring ........................................................................................ 2-13

JSLED ....................................................................................................... 2-13

Keylock .................................................................................................... 2-13

2-6 Jumper Settings............................................................................................ 2-14

Explanation of Jumpers ........................................................................ 2-14

CMOS Clear............................................................................................. 2-14

SCSI Enable/Disable............................................................................... 2-14

GLAN Enable/Disable............................................................................. 2-15

Power Fail Alarm Enable/Disable ........................................................ 2-15

CPU Chassis/CPU Fan Select .............................................................. 2-15

System Bus Speed................................................................................ 2-15

USB Wake-Up......................................................................................... 2-16

Watch Dog Enable/Disable ................................................................... 2-16

Thermal Fan Control .............................................................................. 2-16

Onboard Audio Enable/Disable............................................................ 2-17

SCSI Channel Termination Enable/Disable ......................................... 2-17

Serial ATA Enable/Disable ................................................................... 2-17

Keyboard Wake-Up................................................................................ 2-17

System Bus Speed................................................................................ 2-18

2-7 Onboard Indicators ...................................................................................... 2-19

GLAN LEDs............................................................................................. 2-19

Overheat LEDs ....................................................................................... 2-19

SCSI Channel Activity LEDs................................................................. 2-19

2-8 Parallel Port, Floppy/Hard Disk Drive and SCSI Connections............... 2-20

Parallel Port Connector ......................................................................... 2-20

Floppy Connector................................................................................... 2-21

IDE Connectors ...................................................................................... 2-21

Ultra320 SCSI Connectors.................................................................... 2-22

2-9 Installing Software Drivers......................................................................... 2-23

Chapter 3: Troubleshooting

3-1 Troubleshooting Procedures ........................................................................ 3-1

Before Power On .................................................................................... 3-1

No Power .................................................................................................. 3-1

No Video ................................................................................................... 3-1

Memory Errors.......................................................................................... 3-2

Losing the System’s Setup Configuration ........................................... 3-2

3-2 Technical Support Procedures .................................................................... 3-2

3-3 Frequently Asked Questions........................................................................ 3-3

3-4 Returning Merchandise for Service............................................................ 3-5

Chapter 4: BIOS

4-1 Introduction....................................................................................................... 4-1

4-2 Running Setup ...................................................................................................4-2

4-3 Main BIOS Setup ..............................................................................................4-2

4-4 Advanced Setup.................................................................................................4-6

4-5 Security Setup............................................................................................... 4-16

4-6 Boot Setup ..................................................................................................... 4-18

4-7 Exit.................................................................................................................. 4-19

Appendices:

Appendix A: BIOS POST Messages....................................................................... A-1

Appendix B: BIOS POST Codes ............................................................................. B-1

SUPER X5DA8/X5DAE/X5DAL-G/X5DAL-TG2 User's Manual

Chapter 1: Introduction

1-1

Introduction

Chapter 1

Introduction

1-1 Overview

Checklist

Congratulations on purchasing your computer motherboard from an ac-

knowledged leader in the industry. Supermicro boards are designed with

the utmost attention to detail to provide you with the highest standards in

quality and performance.

Check that the following items have all been included with your mother-

board. If anything listed here is damaged or missing, contact your retailer.

One (1) Supermicro Mainboard

One (1) ribbon cable for IDE devices

One (1) floppy ribbon cable

One (1) four-port USB 2.0 cable (retail only)

Two (2) Pentium 4 Xeon active heatsinks (FAN-050-T, retail/single

package for X5DA8/X5DAE only)

Two (2) heatsink retention clips (SKT-095-604E)

Two (2) Xeon mounting plates (SKT-120-P, X5DAL-G/-TG2 only)

One (1) I/O backpanel shield

One (1) Supermicro CD or diskettes containing drivers and utilities

One (1) User's/BIOS Manual

SCSI Accessories (X5DA8 only)

One (1) 68-pin LVD Ultra320/160 SCSI cable

One (1) set of SCSI driver diskettes

One (1) SCSI manual

1-2

Introduction

SUPER X5DA8/X5DAE/X5DAL-G/X5DAL-TG2 User's Manual

Contacting Supermicro

Headquarters

Address: SuperMicro Computer, Inc.

980 Rock Ave.

San Jose, CA 95131 U.S.A.

Tel: +1 (408) 503-8000

Fax: +1 (408) 503-8008

Email: [email protected] (General Information)

[email protected] (Technical Support)

Web Site: www.supermicro.com

Europe

Address: SuperMicro Computer B.V.

Het Sterrenbeeld 28, 5215 ML

's-Hertogenbosch, The Netherlands

Tel: +31 (0) 73-6400390

Fax: +31 (0) 73-6416525

Email: [email protected] (General Information)

[email protected] (Technical Support)

[email protected] (Customer Support)

Asia-Pacific

Address: SuperMicro, Taiwan

D5, 4F, No. 16 Chien-Ba Road

Chung-Ho 235, Taipei Hsien, Taiwan, R.O.C.

Tel: +886-(2) 8226-3990

Fax: +886-(2) 8226-3991

Web Site: www.supermicro.com.tw

Technical Support:

Email: su[email protected]

Tel: 886-2-8228-1366, ext.132 or 139

Chapter 1: Introduction

1-3

Introduction

Notes

1-4

Introduction

SUPER X5DA8/X5DAE/X5DAL-G/X5DAL-TG2 User's Manual

Figure 1-1. SUPER X5DA8 Image

Chapter 1: Introduction

1-5

Introduction

Figure 1-2. SUPER X5DAE Image

1-6

Introduction

SUPER X5DA8/X5DAE/X5DAL-G/X5DAL-TG2 User's Manual

Figure 1-3. SUPER X5DAL-G Image

Chapter 1: Introduction

1-7

Introduction

Figure 1-4. SUPER X5DAL-TG2 Image

1-8

Introduction

SUPER X5DA8/X5DAE/X5DAL-G/X5DAL-TG2 User's Manual

Figure 1-5. SUPER X5DA8 Layout

(not drawn to scale)

Jumpers not noted are for test purposes only.

Parallel Port

USB0/1

Keyboard

Mouse

GLAN

Battery

JPUSB

J30

JC1

JC2

CPU 2

CPU 1

Overheat Fan

CPU Fan1

CD1 CD2

CPU Fan2

33 MHz PCI #5

33 MHz PCI #4

133 MHz PCI-X #3

100 MHz PCI-X #2

100 MHz PCI-X #1

IDE #2

IDE #1

FLOPPY

Ultra III LVD SCSI CH A

BIOS

MCH

AIC-7902

ICH4

Speaker

8xAGP (1.5V)

COM1

COM2

ATX PWR CONN

J15

DIMM #1B

DIMM #1A

DIMM #2B

DIMM #2A

DIMM #3B

DIMM #3A

BANK 1 BANK 2

BANK 3

JF2

JP36

CPU1 Chassis Fan

JP9

JP8

JP7

J2J3

CPU2 Chassis Fan

Chassis Fan1

JA1

JA2

Ultra III LVD SCSI CH B

Chassis Fan2

JD4

J12

JP40

FPUSB 2/3

WOL

JWOR1

JP35

JD1: JPA1/PWR LED/SPEAKER

JPA2

FPUSB 0/1

JL1

UPER X5DA8

I/O BRIDGE

Ultra SCSI CH B (50-pin)

JA3

JP34

JP39

JP37

JP33

JP38

JOH1

JBT1

D1-D4

DA1

DA2

JPWAKE

Chapter 1: Introduction

1-9

Introduction

X5DA8 Quick Reference

Jumper Description Default Setting

JBT1 CMOS Clear See Chapter 2

JD4 GLAN Enable/Disable Pins 1-2 (Enabled)

JP9 Power Fail Alarm En/Disable Open (Disabled)

JP33 CPU Chassis/CPU Fan Select Closed (CPU Fan)

JP34 SCSI Enable/Disable Pins 1-2 (Enabled)

JP37 Watch Dog Pins 1-2 (Reset)

JP38 Thermal Fan Control See Chapter 2

JP39 System (Front Side) Bus Speed Pins 1-2 (Auto)

JP40 Onboard Audio Enable/Disable Pins 1-2 (Enabled)

JPA1/JPA2 SCSI CH A/B Termination Open (Enabled)

JPUSB USB Wake-up Pins 1-2 (Disabled)

JPWAKE Keyboard Wake-up Pins 1-2 (Disabled)

Connector Description

ATX PWR CONN Primary ATX Power Connector

CD1/CD2 Audio CD Input (large/small)

COM1/COM2 COM1/COM2 Serial Port Connector

CPU/CHS/OH FAN CPU/Chassis/Overheat Fan Headers

DIMM#1A-DIMM#3B Memory (RAM) Slots

FPUSB0/1/2/3 Front Panel USB Headers

GLAN G-bit Ethernet Port

J2/J3 IDE1/2 Hard Disk Drive Connector

J7 Parallel (Printer) Port

J9 PS/2 Keyboard/Mouse Ports

J12 IR/CIR Header

J15 Processor Power Connector

J30 Power Conn. (for use with AGP Pro cards)

JA1/JA2/JA3 Ultra320 LVD SCSI CH A/B/B Connector

JC1/JC2 MIC/LINE IN LINE OUT

JD1 PWR LED/Speaker Header

JF2 Front Control Panel Connector

JL1 Chassis Intrusion Header

JOH1 Overheat LED

JP7 Floppy Disk Drive Connector

JP8 Third Power Supply Fail Header

JP35 Keylock Switch Connector

JP36 Power Supply Fail Alarm Reset Switch

JWOR1 Wake-on-Ring Header

USB0/1 Universal Serial Bus Ports

WOL Wake-on-LAN Header

1-10

Introduction

SUPER X5DA8/X5DAE/X5DAL-G/X5DAL-TG2 User's Manual

Figure 1-6. SUPER X5DAE Layout

(not drawn to scale)

Jumpers not noted are for test purposes only.

Parallel Port

USB0/1

Keyboard

Mouse

GLAN

Battery

J30

JC1

JC2

CPU 2

CPU 1

Overheat Fan

CPU Fan1

CD1 CD2

CPU Fan2

33 MHz PCI #5

33 MHz PCI #4

133 MHz PCI-X #3

100 MHz PCI-X #2

100 MHz PCI-X #1

IDE #2

IDE #1

FLOPPY

BIOS

MCH

AIC-7902

ICH4

Speaker

8xAGP (1.5V)

COM1

COM2

ATX PWR CONN

J15

DIMM #1B

DIMM #1A

DIMM #2B

DIMM #2A

DIMM #3B

DIMM #3A

BANK 1 BANK 2

BANK 3

JF2

JP36

CPU1 Chassis Fan

JP9

JP8

JP7

J2J3

CPU2 Chassis Fan

Chassis Fan1

Chassis Fan2

JD4

J12

JP40

FPUSB 2/3

WOL

JWOR1

JP35

JD1: PWR LED/SPEAKER

FPUSB 0/1

JL1

UPER X5DAE

I/O BRIDGE

JP39

JP37

JP33

JP38

JOH1

JBT1

DA1

DA2

D1-D4

JPUSB

JPWAKE

Chapter 1: Introduction

1-11

Introduction

X5DAE Quick Reference

Jumper Description Default Setting

JBT1 CMOS Clear See Chapter 2

JD4 GLAN Enable/Disable Pins 1-2 (Enabled)

JP9 Power Fail Alarm En/Disable Open (Disabled)

JP33 CPU Chassis/CPU Fan Select Closed (CPU Fan)

JP37 Watch Dog Pins 1-2 (Reset)

JP38 Thermal Fan Control See Chapter 2

JP39 System (Front Side) Bus Speed Pins 1-2 (Auto)

JP40 Onboard Audio Enable/Disable Pins 1-2 (Enabled)

JPUSB USB Wake-up Pins 1-2 (Disabled)

JPWAKE Keyboard Wake-up Pins 1-2 (Disabled)

Connector Description

ATX PWR CONN Primary ATX Power Connector

CD1/CD2 Audio CD Input (large/small)

COM1/COM2 COM1/COM2 Serial Port Connector

CPU/CHS/OH FAN CPU/Chassis/Overheat Fan Headers

DIMM#1A-DIMM#3B Memory (RAM) Slots

FPUSB0/1/2/3 Front Panel USB Headers

GLAN G-bit Ethernet Port

J2/J3 IDE1/2 Hard Disk Drive Connector

J7 Parallel (Printer) Port

J9 PS/2 Keyboard/Mouse Ports

J12 IR/CIR Header

J15 Processor Power Connector

J30 Power Conn. (for use with AGP Pro cards)

JC1/JC2 MIC/LINE IN LINE OUT

JD1 PWR LED/Speaker Header

JF2 Front Control Panel Connector

JL1 Chassis Intrusion Header

JOH1 Overheat LED

JP7 Floppy Disk Drive Connector

JP8 Third Power Supply Fail Header

JP35 Keylock Switch Connector

JP36 Power Supply Fail Alarm Reset Switch

JWOR1 Wake-on-Ring Header

USB0/1 Universal Serial Bus Ports

WOL Wake-on-LAN Header

1-12

Introduction

SUPER X5DA8/X5DAE/X5DAL-G/X5DAL-TG2 User's Manual

Figure 1-7. SUPER X5DAL-G Layout

(not drawn to scale)

Parallel Port

USB0/1

Keyboard

Mouse

GLAN

Battery

J30

CPU 2

CPU 1

Overheat Fan

CPU Fan1

CPU Fan2

33 MHz PCI #2

33 MHz PCI #1

100 MHz PCI-X #2

133 MHz PCI-X #1

IDE #2

IDE #1

FLOPPY

BIOS

MCH

ICH4

8xAGP (1.5V)

COM1

COM2

ATX PWR CONN

J15

DIMM #1

DIMM #2

DIMM #3

DIMM #4

BANK 0

BANK 1

Chassis Fan 1

JP9

JP8

JP7

FPUSB 2/3

WOL

JP35

JD1

FPUSB 0/1

JL1

UPER X5DAL-G

I/O BRIDGE

JP39

JBT1

JPUSB

JPWAKE

JP36/JOH1/JP37

JF2

Chassis Fan 2

JPL1

JP38

JWOR1

J12

D3, D4

Jumpers not noted are for test purposes only.

Chapter 1: Introduction

1-13

Introduction

X5DAL-G Quick Reference

Jumper Description Default Setting

JBT1 CMOS Clear See Chapter 2

JP9 Power Fail Alarm En/Disable Open (Disabled)

JP37 Watch Dog Pins 1-2 (Reset)

JP38 Thermal Fan Control See Chapter 2

JP39 System (Front Side) Bus Speed Pins 1-2 (Auto)

JPA1/JPA2 Serial ATA Enable/Disable Pins 1-2 (Enabled)

JPL1 GLAN Enable/Disable Pins 1-2 (Enabled)

JPUSB USB Wake-up Pins 1-2 (Disabled)

JPWAKE Keyboard Wake-up Pins 1-2 (Disabled)

Connector Description

ATX PWR CONN Primary ATX Power Connector

COM1/COM2 COM1/COM2 Serial Port Connector

CPU/CHS/OH FAN CPU/Chassis/Overheat Fan Headers

DIMM#1-DIMM#4 Memory (RAM) Slots

FPUSB0/1/2/3 Front Panel USB Headers

GLAN G-bit Ethernet Port

J2/J3 IDE1/2 Hard Disk Drive Connector

J7 Parallel (Printer) Port

J9 PS/2 Keyboard/Mouse Ports

J12 IR/CIR Header

J15 Processor Power Connector

J30 Power Conn. (for use with AGP Pro cards)

JD1 PWR LED/Speaker Header

JF2 Front Control Panel Connector

JL1 Chassis Intrusion Header

JOH1 Overheat LED

JP7 Floppy Disk Drive Connector

JP8 Third Power Supply Fail Header

JP35 Keylock Switch Connector

JP36 Power Supply Fail Alarm Reset Switch

JWOR1 Wake-on-Ring Header

USB0/1 Universal Serial Bus Ports

WOL1 Wake-on-LAN Header

1-14

Introduction

SUPER X5DA8/X5DAE/X5DAL-G/X5DAL-TG2 User's Manual

Figure 1-8. SUPER X5DAL-TG2 Layout

(not drawn to scale)

Parallel Port

USB0/1

Keyboard

Mouse

GLAN

Battery

J30

CPU 2

CPU 1

Overheat Fan

CPU Fan1

CPU Fan2

33 MHz PCI #2

33 MHz PCI #1

100 MHz PCI-X #2

66 MHz PCI #1

IDE #2

IDE #1

FLOPPY

BIOS

MCH

ICH4

8xAGP (1.5V)

COM1

COM2

ATX PWR CONN

J15

DIMM #1

DIMM #2

DIMM #3

DIMM #4

BANK 0

BANK 1

Chassis Fan 1

JP9

JP8

JP7

FPUSB 2/3

WOL

JD1

FPUSB 0/1

UPER X5DAL-TG2

I/O BRIDGE

JP39

JBT1

JPUSB

JPWAKE

JP36/JOH1/JP37

JF2

Chassis Fan 2

JPL1

JP38

JWOR1

J12

D3, D4

JPA1

JPA2

SATA#1

SATA#2

SATA#3

SATA#4

SATA

Cntrlr

JSLED

JL1

WOL1

GLAN

SATA

Cntrlr

Jumpers not noted are for test purposes only.

Page is loading ...

Pro-Max SUPER X5DAL-G User manual

Brand: Pro-Max

Model: SUPER X5DAL-G

Category: Server/workstation motherboards

Type: User manual

Download PDF

report

Pro-Max SUPER X5DAL-G User manual

Pro-Max SUPER X5DAL-G User manual

Other documents