Harbor Freight Tools 61229 Quick start guide

Brand: Harbor Freight Tools

Model: 61229

Category: Digital Video Recorders (DVR)

Type: Quick start guide

This manual is also suitable for

8 Channel Surveillance DVR with 4 Cameras and Mobile Monitoring Capabilities

8-Channel

Surveillance DVR

with 4 Cameras & Mobile Monitoring Capabilities

Item 61229

FOR ADVANCED USERS

Internet Setup for Remote Use

INITIAL SETUP

Physical Connections

Quick Start Guide

PORT FORWARDING

SMARTPHONE

ACCESS

Local Area Network (LAN) Setup

Set Date and Time

In DVR

Main Menu

Select System

Set Recording Mode

Motion Detection Settings

Manual

Which

Recording

mode?

Bunker Hill Security

USB Port

Video Input

Connect

Monitor

Connect

Cameras

Connect

Mouse

Power Input

Video Output

Connect

Power

BNC/RCA

VGA

Select

General

Set Date and

Time above

Set Date and

Time

Click Apply

then OK

Scheduled

In DVR

Main Menu

select Record

Press REC on

front of DVR -

red light will

flash

Select

Schedule

Select Channel

and Day of

Week

Select boxes

for Normal and

Motion

On PC, go to Start

Menu, click Run.

In DOS window

type “cmd”, click OK.

type “ipconfig”

press ENTER

STOP

Ensure you have a

Windows® PC with

Internet Explorer®

and a Router before

proceeding.

Connect DVR to

Router via

Ethernet Cable

(Sold Separately)

From DVR Main Menu

select

Network > Network

Type = Static

Find the Router’s LAN

Write down:

1. Subnet Mask

2. Default Gateway

(Router’s IP Address)

In DVR Network > Network

change settings:

1. Client Port: 3000

2. HTTP Port: 3001

3. New IP Address

4. Subnet Mask you wrote down

5. Default Gateway you wrote down

6. DNS1 same as Gateway

Change last 3 digits

to a number between

200 and 255

Change last 3 digits

to a number between

100 and 255

Click Apply then OK

to save changes.

Click Exit, DVR will prompt

restart. Click OK.

After restart,

on DVR go to

Network > Network

to view settings.

Open Internet Explorer®.

In address bar, type in

DVR’s IP Address and HTTP Port:

http://xxx.xxx.xxx.xxx:3001

(where x = IP Address and 3001 = HTTP Port)

Press Enter.

Allow ActiveX Control to install.

You may need to adjust the settings in

Internet Explorer® by adding the http

address to Trusted Sites and modifying

ActiveX controls to allow installation.

After ActiveX Control installs,

with User Name and Password.

WARNING

This Quick Start Guide is not intended to

replace the Owner’s Manual & Safety

Instructions. To prevent serious injury, read

all safety warnings and instructions therein

to ensure proper usage.

In DVR

Main Menu

Select System

Select

Users

Set User Name

and Password

Click Apply

then OK

Repeat for all

Days and all

Channels

Click Apply

then OK

In DVR

Main Menu

Select Alarm

Select

Motion

Select

Channel

Set Sensitivity

Level

Select Area

Select which

Channels

will record

Click Apply

then OK

Set Buzzer for

audible alarm

Set Date and

Time above

Set Recording

Mode above

Wide Area Network (WAN) Setup

REMOTE

COMPUTER

ACCESS

Mount

Cameras

Note: Monitor and

Surge Protector

sold separately.

Set up LAN

according to

instructions above.

and go to

Port Forwarding or

Applications and

Gaming.

Set start port to 3000

and end port to 3002.

Set up both UDP and

TCP protocols if the

option is given.

Open Internet Explorer®.

In address bar, type in

Default Gateway

(from LAN Setup above).

Example: xxx.xxx.xxx.xxx

Press Enter.

Find theRouter’s IP

Address by going to

whatsmyip.com.

Write it down.

On remote computer,

Open Internet Explorer®. In address bar,

type in Router’s IP Address

and HTTP Port (from LAN Setup above):

http://xx.xxx.xxx.xxx:3001

(where x = IP Address and 3001 = HTTP Port)

Press Enter.

Allow ActiveX Control to install.

You may need to adjust the settings

in Internet Explorer® by adding the

http address to Trusted Sites and

modifying ActiveX controls to allow

installation.

After ActiveX Control installs,

with User Name and Password

(from LAN Setup above).

Insert supplied CD

into computer and look in

Mobile Software

folder for instructions.

In DVR

Main Menu

Select Network

then Mobile

Set User Name

and Password

Set Mobile Port

to 3002

Click Apply

then OK

Do you have a

Windows® PC with

Internet Explorer®

and a Router?

YES

Create New IP

Address:

Are last 3 digits of

Default Gateway

between 0-99?

See Manual - Page 12

See Manual - Page 17

See Manual - Page 18

See Manual - Page 19

See Manual - Page 28

See Manual - Page 30

Ethernet

Connection

Harbor Freight Tools 61229 Quick start guide

Brand: Harbor Freight Tools

Model: 61229

Category: Digital Video Recorders (DVR)

Type: Quick start guide

This manual is also suitable for

8 Channel Surveillance DVR with 4 Cameras and Mobile Monitoring Capabilities

Download PDF

report

Harbor Freight Tools 61229 Quick start guide

This manual is also suitable for

Harbor Freight Tools 61229 Quick start guide

Related papers

Other documents