Gigabyte GA-7ZMMC User manual

FCC Compliance Statement:

This equipment has been tested and found to

comply with limits for a Class B digital device,

pursuant to Part 15 of the FCC rules. These

limits are designed to provide reasonable

protection against harmful interference in

residential installations. This equipment

generates, uses, and can radiate radio

frequency energy, and if not installed and used

in accordance with the instructions, may cause

harmful interference to radio communications.

However, there is no guarantee that interference

will not occur in a particular installation. If this

equipment does cause interference to radio or

television equipment reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna

-Move the equipment away from the receiver

-Plug the equipment into an outlet on a circuit different from that to which

the receiver is connected

-Consult the dealer or an experienced radio/television technician for

additional suggestions

You are cautioned that any change or modifications to the equipment not

expressly approve by the party responsible for compliance could void Your

authority to operate such equipment.

This device complies with Part 15 of the FCC Rules. Operation is subjected to

the following two conditions 1) this device may not cause harmful interference

and 2) this device must accept any interference received, including interference

that may cause undesired operation.

DECLARATION OF CONFORMITY

Per FCC Part 2 Section 2. 1077(a)

Responsible Party Name: G.B.T. INC.

Address: 18305 Valle

y

Blvd., Suite#A

LA Puent, CA 91744

Phone/Fax No: (818) 854-9338/ (818) 854-9339

hereby declares that the product

Product Name:

Model Number:

Mother Board

Conforms to the following specifications:

FCC Part 15, Subpart B, Section 15.107(a) and Section 15.109(a),

Class B Digital Device

Supplementary Information:

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful

and (2) this device must accept any inference received, including

that may cause undesired operation.

Representative Person's Name: ERIC LU

Signature:

Date: Jan. 15, 2001

Eric Lu

GA-7ZMMC

Declaration of Conformity

We, Manufacturer/Importer

(full address)

G.B.T. Technology Träding GMbH

Ausschlager Weg 41, 1F, 20537 Hamburg, Germany

declare that the product

( description of the apparatus, system, installation to which it refers)

Mother Board

GA-7ZMMC

is in conformity with

(reference to the specification under which conformity is declared)

in accordance with 89/336 EEC-EMC Directive

EN 55011

Limits and methods of measurement

EN 61000-3-2*

Disturbances in supply systems caused

of radio disturbance characteristics of

EN60555-2

by household appliances and similar

industrial, scientific and medical (ISM elect

r

ical equipment “Harmonics”

high frequency equipment

EN55013

Limits and methods of measurement

EN61000-3-3*

Disturbances in supply systems caused

of radio disturbance characteristics of

EN60555-3

by household appliances and similar

broadcast receivers and associated electrical equipment “Voltage fluctuations”

equipment

EN 55014

Limits and methods of measurement

EN 50081-1

Generic emission standard Part 1:

of radio disturbance characteristics of

Residual, commercial and light industry

household electrical appliances,

portable tools and similar electrical

EN 50082-1

Generic immunity standard Part 1:

apparatus Residual, commercial and light industry

EN 55015

Limits and methods of measurement

EN 55081-2

Generic emission standard Part 2:

of radio disturbance characteristics of Industrial environment

fluorescent lamps and luminaries

EN 55020

Immunity from radio interference of

EN 55082-2

Generic immunity standard Part 2:

broadcast receivers and associated Industrial environment

equipment

EN 55022

Limits and methods of measurement

ENV 55104

Immunity requirements for household

of radio disturbance characteristics of appliances tools and similar apparatus

information technology equipment

DIN VDE 0855

Cabled distribution systems; Equipment

EN 50091- 2

EMC requirements for uninterruptible

part 10

for receiving and/or

distribution

from power systems (UPS)

part 12

sound and television signals

CE marking

(EC conformity marking)

The manufacturer also declares the conformity of above mentioned product

with the actual required safety standards in accordance with LVD 73/23 EEC

EN 60065

Safety requirements for mains operated

EN 60950

Safety for information technology equipment

electronic and related apparatus for including electrical business equipment

household and similar general use

EN 60335

Safety of household and similar

EN 50091-1

General and Safety requirements for

electrical appliances uninterruptible power systems (UPS)

Manufacturer/Importer

Signature

:

Rex Lin

(Stamp)

Date : Jan. 15, 2001 Name : Rex Lin

7ZMMC

AMD Athlon

TM

/Duron

TM

Socket A Processor

Motherboard

USER'S MANUAL

AMD Athlon

TM

/Duron

TM

Socket A Processor Motherboard

REV. 2.01 Third Edition

R-201-03-010627

How This Manual Is Organized

This manual is divided into the following sections:

1) Revision History

Manual revision information

2) Item Checklist

Product item list

3) Features

Product information & specification

4) Hardware Setup

Instructions on setting up the motherboard

5) Performance & Block Diagram

Product performance & block diagram

6) Suspend to RAM

Instructions STR installation

7) Four Speaker & SPDIF

Four Speaker & SPDIF introduction

8) @BIOS

TM

& EasyTune

III

TM

@BIOS

TM

& EasyTune

III

TM

introduction

9) BIOS Setup

Instructions on setting up the BIOS

software

10) Appendix

General reference

Table Of Content

Revision History P.1

Item Checklist P.2

Feature Summary P.3

7ZMMC Motherboard Layout P.5

Page Index for CPU Speed Setup / Connectors / Panel and Jumper

Definition

P.6

Performance List P.23

Block Diagram P.25

Suspend to RAM Installation P.26

Four Speaker & SPDIF Introduction (Optional) P.32

@BIOS

TM

Introduction P.38

EasyTune

III

TM

Introduction P.39

Memory Installation P.41

Page Index for BIOS Setup P.42

Appendix P.67

7ZMMC Motherboard

1

Revision History

Revision Revision Note Date

2.01 Initial release of the 7ZMMC motherboard user’s manual. Feb. 2001

2.01 Second release of the 7ZMMC motherboard user’s

manual.

Apr. 2001

2.01 Third release of the 7ZMMC motherboard user’s manual. Jun. 2001

The author assumes no responsibility for any errors or omissions that may appear in this

document nor does the author make a commitment to update the information contained herein.

Third-party brands and names are the property of their respective owners.

Jun. 27, 2001 Taipei, Taiwan, R.O.C

Item Checklist

2

Item Checklist

;

The 7ZMMC motherboard

;

Cable for IDE / floppy device

;

Diskettes or CD (GA-7ZMM CD) for motherboard driver & utility

;

7ZMMC user’s manual

7ZMMC Motherboard

3

Feature Summary

Form Factor

y

24.4 cm x 22.2 cm Micro ATX size form factor, 4 layers

PCB.

CPU

y

AMD Athlon

TM

/Duron

TM

(K7) Socket A Processor

y

256K/64K L2 cache on die

y

Supports 600MHz ~ 1GHz and above

Chipset Pro Savage KM133, consisting of:

y

VT8365 Memory/AGP/PCI Controller (PAC)

y

VT82C686B PCI Super-I/O Integrated Peripheral

Controller (PSIPC)

Clock Generator

y

ICS 9248BF-141

100/102*/104*/106*/108*/110*/112*/133 MHz system bus

speeds

(* These speed settings are not guaranteed)

Memory

y

2 168-pin DIMM sockets

y

Supports PC-100/133 and VCM SDRAM

y

Supports up to 1.0GB DRAM

y

Supports only 3.3V SDRAM DIMM

I/O Control

y

VT82C686B

Slots

y

1 AGP slot supports 4X mode & AGP 2.0 compliant

y

3 PCI slots supports 33MHz & PCI 2.2 compliant

y

1 CNR (Communication and Networking Riser) slot

(Not support LAN)

On-Board IDE

y

2 IDE bus master (UDMA 33/ATA 66/ATA 100) IDE ports

for up to 4 ATAPI devices

y

Supports PIO mode 3, 4 (UDMA 33/ATA 66/ATA 100) IDE

& ATAPI CD-ROM

On-Board

Peripherals

y

1 floppy port supports 2 FDD with 360K, 720K, 1.2M,

1.44M and 2.88M bytes

y

1 parallel port supports Normal/EPP/ECP mode

y

1 serial port (COM A)

y

4 USB ports

Hardware Monitor

y

CPU/System fan revolution detection

y

CPU/Power/System fan control

y

System voltage detection

y

CPU/System temperature detection

To be continued…

Features Summary

4

PS/2 Connector

y

PS/2



Keyboard interface and PS/2



Mouse interface

On-Board VGA

y

Build S3 Savage4 (86C370) in VT8365

y

Support shared memory architecture

On-Board Sound

y

Creative CT5880 sound (Optional)

y

AC’97 CODEC

y

Line In / Line Out / Mic In / AUX In / CD In / TEL /

SPDIF (Optional) / Game Port /

Four Speaker (Optional)

BIOS

y

Licensed AMI BIOS, 2M bit flash ROM

Additional Features

y

Support Wake-On-LAN (WOL)

y

Support Internal / External Modem Ring On

y

Support USB KB/MS Wake up from S3-S5

y

Includes 3 fan power connectors

y

Poly fuse for keyboard over-current protection

y

Support STR (Suspend-To-RAM) function

y

Support @BIOS™ and EasyTune

III

™

7ZMMC Motherboard

5

7ZMMC Motherboard Layout

7ZMMC

PCI1

PCI2

Socket A CPU

VT82C

686B

VT8365

GAME & AUDIO

VGA

COM A

LPT

PS/2

BIOS

J3

J8

J7

J9

BAT1

J2

FLOPPY

IDE1

IDE2

AGP 1

JP6

SW1

J11

LED1

J13

J12

JP4

USB1

JP8

CNR

PCI3

CODEC

J18

USB2

DIMM1

DIMM2

JP7

J16

J17

ATX POWER

JP1

JP3

JP9

JP2

Creative

CT5880

JP10

JP11

7ZMMC Motherboard Layout

6



Page Index for CPU Speed Setup/Connectors/Panel and Jumper Definition

Page

CPU Speed Setup P. 7

SW1 P. 7

Connectors P. 8

ATX Power P.8

COM A / VGA / LPT Port P.8

Floppy Connector P.9

Game & Audio Port P.9

IDE 1(Primary) / IDE 2(Secondary) Connector P.10

J2 (System Fan) P.10

J3 (CPU Fan) P.11

J7 (AUX_IN) P.11

J8 (TEL) P.12

J9 (CD Audio Line In) P.12

J12 (Wake On LAN) P.13

J13 (Ring Power On) P.13

JP2 (Front Audio) P.14

JP6 (Power Fan) P.14

JP8 / LED1 (DIMM LED Connector & DIMM LED) P.15

PS/2 Keyboard & PS/2 Mouse Port P.15

USB1 (Rear USB Port) P.16

USB2 (Front USB Connector) P.16

Panel and Jumper Definition P.17

BAT1 (Battery) P.17

J11 (2x11 Pins Front Panel) P.17

J16/J17/J18 (CNR Select) [Optional] P.18

JP1 (Front MIC Function) P.19

JP3 (Clear CMOS Function) [Optional] P.19

JP4 (USB Device Wake up Selection) P.20

JP7 (STR Function Enable) P.20

JP9 (BIOS Write Protect Function) P.21

JP10 (CPU Clock Frequency) [Optional] P.21

JP11 (Onboard Sound Function Selection) P.22

7ZMMC Motherboard

7

CPU Speed Setup

The system bus speed is selectable at 100MHz. The user can select the system bus speed by

DIP switch

SW1

.

SW1: CPU Speed Setup

SW1:

O: ON, X: OFF

FSB 1 2 3 4

*95 O O X O

100 X O X X

*102 0 0 X X

*103 X O X O

*107 O X O 0

*110 0 X 0 X

*113 X X O O

*115 X X X 0

*133 X X X X

* These speed settings are not guaranteed.

0

AMD CPU Heat Sink Installation:

Beware: Please check that the heat sink is in good contact with the CPU before you turn on your

system.

The poor contact will cause over heat, and might cause damage to your

processor.

Connectors

8

Connectors

ATX Power

Pin No. Definition

3,5,7,13,

15-17

GND

1,2,11 3.3V

4,6,19,20 VCC

10 +12V

12 -12V

18 -5V

8 Power Good

9 5V SB stand by+5V

14 PS-ON(Soft On/Off)

20 10

11

1

COM A / VGA / LPT Port

COM A

LPT Port

VGA

7ZMMC Motherboard

9

Floppy Connector

Red Line

FDD1

Game & Audio Port

Line Out 1: Line Out or SPDIF (The SPDIF output is

capable of providing digital audio to external speakers

or compressed AC3 data to an external Dolby digital

decoder). To enable SPDIF, simply insert SPDIF

connector into Line Out1. Line Out1 will become

SPDIF Out automatically. (see page 35 for more

information).

To enable Four Speaker (for Creative 5880 audio

only), simply follow instructions on page 32 and Line In

will become Line Out2 to support second pair of stereo

speakers.

MIC In

Game

Port

Line In/Line Out 2

Line Out 1

Connectors

10

IDE1 (Primary), IDE2 (Secondary) Connector

IDE 2 IDE 1

Red Line

J2: Sysem Fan

Pin No. Definition

1 Control

2 +12V

3 SENSE

1

7ZMMC Motherboard

11

J3: CPU Fan

Pin No. Definition

1 Control

2 +12V

3 SENSE

1

J7: AUX_IN

Pin No. Definition

1 AUX-L

2 GND

3 GND

4 AUX-R

1

Connectors

12

J8 TEL: The connector is for Modem with internal voice connector

Pin No. Definition

1 Signal-In

2 GND

3 GND

4 Signal-Out

1

J9: CD Audio Line In

Pin No. Definition

1 CD-L

2 GND

3 GND

4 CD-R

1

7ZMMC Motherboard

13

J12: Wake On LAN

Pin No. Definition

1 +5V SB

2 GND

3 Signal

1

J13: Ring Power On (Internal Modem Card Wake Up)

Pin No. Definition

1 Signal

2 GND

1

Page is loading ...

Gigabyte GA-7ZMMC User manual

This manual is also suitable for

Gigabyte GA-7ZMMC User manual

Related papers

Other documents