Page is loading ...
PARTS
A: Main Stroller Body B: Front Step C: Cup Holder D: Front Wheels G: Storage Compartment
(x 1 set)
E: Rear Wheels (x 2)
F: Rear Axle & Brake Assembly
ASSEMBLY
DELUXE PET STROLLER
Assembly Instructions
PS-500
1. Firmly grasp and lift the handle bar to unfold the Body (A); Lift until
the frame locks into position.
2. Turn the stroller upside down; Insert Front Step (B) onto the front frame tubes;
Push until the step locks into position.
Thank you for your purchase. Please read
this instruction sheet before assembling,
and use the product appropriately. Injuries
to humans or pets may occur if misused.
Also, please save this sheet so that the
user can always refer to it.
FOLDING THE STROLLER
Distributed by:
IRIS USA Inc.
Pleasant Prairie, WI 53158
800.320.4747
www.irisusainc.com
MADE IN CHINA
1. Unzip the canopy from the front mesh and fold the canopy back towards the handle bars. 2. Firmly grip the locking sleeve on the handle bar, press down on
the red lock release button and rotate the locking sleeve downward. 3. While gripping the locking sleeve, press downward on the handle bar
5. Attach the Axel & Brake Assembly (F) to the rear frame tubes; Push
down until the assembly locks in position.
3. Attach Front Wheels (D) to Front Step (B); Push onto tube until the
wheel set locks into position.
4. Attach the Rear Wheels (E) onto the Rear Axel & Brake Assembly (F); Push until
the wheels click into a locked position.
6. Attach the Cup Holder ( C ) by pressing it securely onto the pins located on the outside of
the handle bars; Next, unfold the Storage Compartment (G) and attach it to the underside
of the stroller using the snaps.
/
