11
Use
Note:
• Place the mini air cooler on an even surface
such as a table, desk or counter top.
• Let the filter absorb water for at least 3
minutes after filling the tank and before
using it. Doing so, cools down the air the
quickest way.
• Try to stay within a few feet of mini air
cooler. You’ll feel the most benefit when
sitting directly in front of it.
• The mini air cooler will run for
approximately 4 hours on a single fill on
low fan speed. Even if the water tank is
empty, the filter is still damp and mini air
cooler is still cooling.
• Note that during the very first usage
and after longer periods of not using
the product, a greater amount of water
will instantly flow from the tank into the
product and the filter. This is normal and
does not influence the total running time.
Fig.
1
Place mini air cooler on a flat surface.
Fig.
2
Open the water tank lid and fill it with
water. We recommend a pitcher or
measuring cup. Or you can take o the
water tank to fill it with water from a
faucet.
Warning!
If the water tank has been filled, do not move
the mini air cooler anymore. If water runs
out of the tank and electrical (fan motor) or
electronic components get wet, the unit will
be permanently damaged.
Fig.
3
Plug an appropriate USB adaptor into
a socket outlet. Then, insert the larger
USB A plug of the cable into the USB
power supply and the other end into
the USB socket on the back of the
mini air cooler. Note the minimum USB
current of 2A. Therefore USB sockets of
computers may not work appropriately.
Warning!
Do not turn on and / or use the product while
it is connected to a powerbank.
Fig.
4
Press the on/o switch to turn on the
mini air cooler.
Set the fan speed by pressing the fan
level button. You can choose between
low, medium, and high mode. The fan
level indicator shows the currently set
speed.
Choose the light color by pressing the
light button. You can choose between
7 colors in the following order: red,
blue, purple, green, yellow, cyan, white.
Pushing the light button again when in
white light mode will turn o the lights.
To turn o the mini air cooler, press the
on/ o button again.
Note:
• It is recommend to turn on the mini cooler
with an empty water tank for at least
0.5hour for drying. Missing to do so, might
result in unpleasant smells etc.
• The machine provides the function of
automatically shaking dust. When turned
o, but connected with the power supply,
press the fan speed and the light buttons
for three seconds to enter this mode.
The machine will switch back and forth
between the high and low speed, and the
color of the light will automatically change.
Turn o the feature again by pressing the
fan speed and light button for 3 seconds,
or automatically after the machine runs for
5 minutes. This function can help shake o
some dust adsorbed on the curtain fabric.
IM_KCC620_191122_V05_HR.indb 11 22/11/2019 17:20