LG M228WD-BZ User manual

Please read this manual carefully before operating

your set.

Retain it for future reference.

Record model number and serial number of the set.

See the label attached on the back cover and quote

this information to your dealer when you require

service.

OWNER’S MANUAL

MM222288WWDD

Trade Mark of the DVB Digital Video

Broadcasting Project (1991 to 1996)

IIDD NNuummbbeerr((ss))::

4984: M228WD

2

SAFETY PRECAUTIONS

Please read these safety precautions carefully before using the product.

WWaarrnniinngg

If you ignore the warning message, you may be seriously injured or there is a possibility of ccident or death.

CCaauuttiioonn

If you ignore the caution message, you may be slightly injured or the product may be damaged

PPrreeccaauuttiioonnss iinn iinnssttaalllliinngg tthhee PPrroodduucctt

WWaarrnniinngg

KKeeeepp aawwaayy ffrroomm hheeaatt ssoouurrcceess lliikkee eelleeccttrriiccaall hheeaatteerrss..

- Electrical shock, fire, malfunction or deformation may occur.

KKeeeepp tthhee ppaacckkiinngg aannttii--mmooiissttuurree mmaatteerriiaall oorr vviinnyyll ppaacckkiinngg oouutt ooff tthhee rreeaacchh ooff cchhiillddrreenn..

- Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the nearest

hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.

DDoo nnoott ppuutt hheeaavvyy oobbjjeeccttss oonn tthhee pprroodduucctt oorr ssiitt uuppoonn iitt..

- If the product collapses or is dropped, you may be injured. Children must pay particular attention.

DDoo nnoott lleeaavvee tthhee ppoowweerr oorr ssiiggnnaall ccaabbllee uunnaatttteennddeedd oonn tthhee ppaatthhwwaayy..

- The passerby can falter, which can cause electrical shock, fire, product breakdown or injury.

IInnssttaallll tthhee pprroodduucctt iinn aa nneeaatt aanndd ddrryy ppllaaccee..

- Dust or moisture can cause electrical shock, fire or product damage.

IIff yyoouu ccaann ssmmeellll ssmmookkee oorr ootthheerr ooddoorrss oorr hheeaarr aa ssttrraannggee ssoouunndd uunnpplluugg tthhee ppoowweerr ccoorrdd aanndd ccoonn

ttaacctt tthhee sseerrvviiccee cceenntteerr..

- If you continue to use without taking proper measures, electrical shock or fire can occur.

IIff yyoouu ddrrooppppeedd tthhee pprroodduucctt oorr tthhee ccaassee iiss bbrrookkeenn,, ttuurrnn ooffff tthhee pprroodduucctt aanndd uunnpplluugg tthhee ppoowweerr ccoorrdd..

- If you continue to use without taking proper measures, electrical shock or fire can occur. Contact the service center.

DDoo nnoott ddrroopp aann oobbjjeecctt oonn oorr aappppllyy iimmppaacctt ttoo tthhee pprroodduucctt.. DDoo nnoott tthhrrooww aannyy ttooyyss oorr oobbjjeeccttss oonn

tthhee pprroodduucctt ssccrreeeenn..

- It can cause injury to human, problem to product and damage the display.

CCaauuttiioonn

MMaakkee ssuurree tthhee pprroodduucctt vveennttiillaattiioonn hhoollee iiss nnoott bblloocckkeedd.. IInnssttaallll tthhee pprroodduucctt iinn aa ssuuiittaabbllyy wwiiddee ppllaaccee

((mmoorree tthhaann 1100ccmm ffrroomm tthhee wwaallll))

- If you install the product too close to the wall, it may be deformed or fire can break out due to internal heat.

DDoo nnoott bblloocckk tthhee vveennttiillaattiioonn hhoollee ooff tthhee pprroodduucctt bbyy aa ttaabblleeccllootthh oorr ccuurrttaaiinn..

- The product can be deformed or fire can break out due to overheating inside the product.

IInnssttaallll tthhee pprroodduucctt oonn aa ffllaatt aanndd ssttaabbllee ppllaaccee tthhaatt hhaass nnoo rriisskk ooff ddrrooppppiinngg tthhee pprroodduucctt..

- If the product is dropped, you may be injured or the product may be broken.

IInnssttaallll tthhee pprroodduucctt wwhheerree nnoo EEMMII ooccccuurrss..

KKeeeepp tthhee pprroodduucctt aawwaayy ffrroomm ddiirreecctt ssuunnlliigghhtt..

- The product can be damaged.

3

SAFETY PRECAUTIONS

EElleeccttrriiccaall PPoowweerr RReellaatteedd PPrreeccaauuttiioonnss

WWaarrnniinngg

MMaakkee ssuurree ttoo ccoonnnneecctt tthhee ppoowweerr ccaabbllee ttoo tthhee ggrroouunnddeedd ccuurrrreenntt..

- You may be electrocuted or injured.

UUssee tthhee rraatteedd vvoollttaaggee oonnllyy..

- The product can be damaged, or you may be electrocuted.

IInn tthhee pprreesseennccee ooff tthhuunnddeerr aanndd lliigghhttnniinngg,, nneevveerr ttoouucchh tthhee ppoowweerr ccoorrdd aanndd ssiiggnnaall ccaabbllee bbeeccaauussee iitt

ccaann bbee vveerryy ddaannggeerroouuss..

- It can cause electric shock.

DDoo nnoott ccoonnnneecctt sseevveerraall eexxtteennssiioonn ccoorrddss,, eelleeccttrriiccaall aapppplliiaanncceess oorr eelleeccttrriiccaall hheeaatteerrss ttoo aa ssiinnggllee oouuttlleett..

UUssee aa ppoowweerr bbaarr wwiitthh aa ggrroouunnddiinngg tteerrmmiinnaall ddeessiiggnneedd ffoorr eexxcclluussiivvee uussee wwiitthh tthhee ccoommppuutteerr..

- A fire can break out due to overheating.

DDoo nnoott ttoouucchh tthhee ppoowweerr pplluugg wwiitthh wweett hhaannddss.. AAddddiittiioonnaallllyy,, iiff tthhee ccoorrdd ppiinn iiss wweett oorr ccoovveerreedd wwiitthh

dduusstt,, ddrryy tthhee ppoowweerr pplluugg ccoommpplleetteellyy oorr wwiippee dduusstt ooffff..

- You may be electrocuted due to excess moisture.

IIff yyoouu ddoonn’’tt iinntteenndd ttoo uussee tthhee pprroodduucctt ffoorr aa lloonngg ttiimmee,, uunnpplluugg tthhee ppoowweerr ccaabbllee ffrroomm tthhee pprroodduucctt..

- Covering dust can cause a fire, or insulation deterioration can cause electric leakage, electric shock or fire.

FFiixx tthhee ppoowweerr ccaabbllee ccoommpplleetteellyy..

- If the power cable is not fixed completely, a fire can break out.

HHoolldd tthhee pplluugg wwhheenn ppuulllliinngg oouutt tthhee ppoowweerr ccaabbllee.. DDoo nnoott bbeenndd tthhee ppoowweerr ccoorrdd wwiitthh eexxcceessssiivvee ffoorrccee

oorr ppuutt hheeaavvyy oobbjjeeccttss oonn tthhee ppoowweerr ccoorrdd..

- The power line can be damaged, which may cause electric shock or fire.

DDoo nnoott iinnsseerrtt aa ccoonndduuccttoorr ((lliikkee aa mmeettaall cchhooppssttiicckk)) iinnttoo oonnee eenndd ooff tthhee ppoowweerr ccaabbllee wwhhiillee tthhee ootthheerr

eenndd iiss ccoonnnneecctteedd ttoo tthhee iinnppuutt tteerrmmiinnaall oonn tthhee wwaallll.. AAddddiittiioonnaallllyy,, ddoo nnoott ttoouucchh tthhee ppoowweerr ccaabbllee rriigghhtt

aafftteerr pplluuggggiinngg iinnttoo tthhee wwaallll iinnppuutt tteerrmmiinnaall..

- You may be electrocuted.

TThhee ppoowweerr ssuuppppllyy ccoorrdd iiss uusseedd aass tthhee mmaaiinn ddiissccoonnnneeccttiioonn ddeevviiccee.. EEnnssuurree tthhaatt tthhee ssoocckkeett--oouuttlleett iiss

eeaassiillyy aacccceessssiibbllee aafftteerr iinnssttaallllaattiioonn

.

MMaaiinn ppoowweerr bbrreeaakkeerr iiss tthhee ppoowweerr ccoorrdd aanndd tthhiiss bbrreeaakkiinngg ddeevviiccee mmuusstt bbee llooccaatteedd aatt aa llooccaattiioonn wwhheerree

iitt iiss eeaassyy ttoo ooppeerraattee..

CCaauuttiioonn

DDoo nnoott uunnpplluugg tthhee ppoowweerr ccoorrdd wwhhiillee tthhee pprroodduucctt iiss iinn uussee..

- Electrical shock can damage the product.

PPrreeccaauuttiioonnss iinn MMoovviinngg tthhee PPrroodduucctt

WWaarrnniinngg

MMaakkee ssuurree ttoo ttuurrnn ooffff tthhee pprroodduucctt..

- You may be electrocuted or the product can be damaged.

MMaakkee ssuurree ttoo rreemmoovvee aallll ccaabblleess bbeeffoorree mmoovviinngg tthhee pprroodduucctt..

- You may be electrocuted or the product can be damaged.

4

SAFETY PRECAUTIONS

CCaauuttiioonn

DDoo nnoott sshhoocckk tthhee pprroodduucctt wwhheenn mmoovviinngg iitt..

- You may be electrocuted or the product can be damaged.

DDoo nnoott ddiissppoossee tthhee pprroodduucctt--ppaacckkiinngg bbooxx.. UUssee iitt wwhheenn yyoouu mmoovvee..

MMaakkee tthhee ppaanneell ffaaccee ffoorrwwaarrdd aanndd hhoolldd iitt wwiitthh bbootthh hhaannddss ttoo mmoovvee..

- If you drop the product, the damaged product can cause electric shock or fire. Contact with the service center

for repair.

PPrreeccaauuttiioonnss iinn UUssiinngg tthhee PPrroodduucctt

WWaarrnniinngg

DDoo nnoott ddiissaasssseemmbbllee,, rreeppaaiirr oorr mmooddiiffyy tthhee pprroodduucctt aatt yyoouurr oowwnn ddiissccrreettiioonn..

- Fire or electric shock accident can occur.

- Contact the service center for check, calibration or repair.

WWhheenn tthhee ddiissppllaayy iiss ttoo bbee lleefftt uunnaatttteennddeedd ffoorr aann eexxtteennddeedd ppeerriioodd ooff ttiimmee,, uunnpplluugg iitt ffrroomm tthhee wwaallll

oouuttlleett..

KKeeeepp tthhee pprroodduucctt aawwaayy ffrroomm wwaatteerr..

- Fire or electric shock accident can occur.

CCaauuttiioonn

DDoo nnoott ppuutt oorr ssttoorree iinnffllaammmmaabbllee ssuubbssttaanncceess nneeaarr tthhee pprroodduucctt..

- There is a danger of explosion or fire due to careless handling of the inflammable substances.

WWhheenn cclleeaanniinngg tthhee bbrroowwnn ttuubbee ssuurrffaaccee,, uunnpplluugg tthhee ppoowweerr ccoorrdd aanndd ssccrruubb wwiitthh ssoofftt ccllootthh ttoo pprree

vveenntt ssccrraattcchhiinngg.. DDoo nnoott cclleeaann wwiitthh aa wweett ccllootthh..

- The water can sink into the product, which can cause electric shock or serious malfunction.

TTaakkee aa rreesstt ffrroomm ttiimmee ttoo ttiimmee ttoo pprrootteecctt yyoouurr vviissiioonn..

KKeeeepp tthhee pprroodduucctt cclleeaann aatt aallll ttiimmeess..

TTaakkee aa ccoommffoorrttaabbllee aanndd nnaattuurraall ppoossiittiioonn wwhheenn wwoorrkkiinngg wwiitthh aa pprroodduucctt ttoo rreellaaxx tthhee mmuusscclleess..

TTaakkee aa rreegguullaarr bbrreeaakk wwhheenn wwoorrkkiinngg wwiitthh aa pprroodduucctt ffoorr aa lloonngg ttiimmee..

DDoo nnoott pprreessss ssttrroonnggllyy uuppoonn tthhee ppaanneell wwiitthh aa hhaanndd oorr sshhaarrpp oobbjjeecctt ssuucchh aass nnaaiill,, ppeenncciill oorr ppeenn,, oorr

mmaakkee aa ssccrraattcchh oonn iitt..

KKeeeepp tthhee pprrooppeerr ddiissttaannccee ffrroomm tthhee pprroodduucctt..

- Your vision may be impaired if you look at the product too closely.

SSeett tthhee aapppprroopprriiaattee rreessoolluuttiioonn aanndd cclloocckk bbyy rreeffeerrrriinngg ttoo tthhee UUsseerr’’ss GGuuiiddee..

- Your vision can be impaired.

UUssee aauutthhoorriizzeedd ddeetteerrggeenntt oonnllyy wwhheenn cclleeaanniinngg tthhee pprroodduucctt.. ((DDoo nnoott uussee bbeennzzeennee,, tthhiinnnneerr oorr aallccoohhooll..))

- Product can be deformed.

OOnn DDiissppoossaall

TThhee fflluuoorreesscceenntt llaammpp uusseedd iinn tthhiiss pprroodduucctt ccoonnttaaiinnss aa ssmmaallll aammoouunntt ooff mmeerrccuurryy..

DDoo nnoott ddiissppoossee ooff tthhiiss pprroodduucctt wwiitthh ggeenneerraall hhoouusseehhoolldd wwaassttee..

DDiissppoossaall ooff tthhiiss pprroodduucctt mmuusstt bbee ccaarrrriieedd oouutt iinn aaccccoorrddaannccee ttoo tthhee rreegguullaattiioonnss ooff yyoouurr llooccaall

aauutthhoorriittyy..

5

PREPARATION

FRONT PANEL CONTROLS

■

This is a simplified representation of the front panel. Here shown may be somewhat different from your set.

• Remote Control Sensor

• Power Indicator

• Power Sensor

INPUT

MENU

VOL

PROK

PROGRAMME

Buttons

VOLUME

Buttons

MENU

Button

OK

Button

INPUT

Button

6

PREPARATION

BACK PANEL INFORMATION

PCMCIA (Personal Computer Memory Card

International Association) Card Slot

(This feature is not available in all countries.)

Power Cord Socket

This set operates on an AC power. The voltage is

indicated on the Specifications page. Never

attempt to operate the set on DC power.

HDMI Input

Connect a HDMI signal to HDMI IN.

Or DVI(VIDEO)signal to HDMI/DVI port with DVI

to HDMI cable.

RS-232C IN (CONTROL & SERVICE) PORT

Connect to the RS-232C port on a PC.

Antenna Input

Connect over-the-air signals to this jack.

Component Input

Connect a component video/audio device to

these jacks.

RGB/DVI Audio Input

Connect the monitor output from a PC to the

appropriate input port.

Euro Scart Socket (AV1/AV2)

Connect scart socket input or output from an

external device to these jacks.

1

2

3

4

5

6

7

8

A

This is a simplified representation of the back panel. Here shown may be somewhat different from your set.

AC IN

AUDIO IN

(RGB/DVI)

Y

PB

PR

LR

VIDEO

COMPONENT IN

AUDIO

EJECT PCMCIA

CARD SLOT

RS-232C IN

(CONTROL & SERVICE)

RGB (PC) IN

HDMI/DVI IN

AV 1

V 1

AV 2

V 2

ANTENNA IN

1

3

4

6 75

8

2

7

PREPARATION

STAND INSTALLATION

■

Here shown may be somewhat different from your set.

1

2

3

4

Carefully place the product screen side down on a

cushioned surface that will protect product and

screen from damage.

Hold the

hhiinnggee bbooddyy

and bend it upward.

Hinge Body

Insert the

ssttaanndd bbooddyy

into the product until

clicking sound.

Stand Body

Assemble the parts of the

ssttaanndd bbooddyy

with

ccoovveerr bbaassee

of the product.

Cover Base

8

PREPARATION

DETACHING STAND

1

2

3

Place the set with its front facing downward on a

cushion or soft cloth.

Pull cover base backward during pressing botton

on stand body.

Hold cover base and pull with shake it backward

to separate from stand body.

4

Hold the stand and bend it upward.

5

Pull stand body to separate from set during

pressing 2 latches.

■

Here shown may be somewhat different from your set.

9

PREPARATION

BACK COVER FOR WIRE ARRANGEMENT

Connect the cables as necessary.

To connect an additional equipment, see the

EExxtteerrnnaall EEqquuiippmmeenntt SSeettuupp

section.

1

Install the

CCAABBLLEE MMAANNAAGGEEMMEENNTT

as shown.

2

First, press the cable management. Hold the

CCAABBLLEE MMAANNAAGGEEMMEENNTT

with both hands and pull it upward.

NOTE

!

GG

Do not hold the

CCAABBLLEE MMAANNAAGGEEMMEENNTT

when moving the product.

- If the product is dropped, you may be injured or the product may be broken.

How to remove the cable management

■

Here shown may be somewhat different from your set.

10

PREPARATION

WALL MOUNT: HORIZONTAL INSTALLATION

DESKTOP PEDESTAL INSTALLATION

For proper ventilation, allow a clearance of 4inches on each side from the wall.

For proper ventilation, allow a clearance of 4" on each side and from the wall. Detailed installation

instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and

Setup Guide.

4 inches

4 inches 4 inches

4 inches

4 inches4 inches

4 inches

11

PREPARATION

POSITIONING YOUR DISPLAY

■

Here shown may be somewhat different from your set.

Adjust the position of the panel in various ways for maximum comfort.

•• TTiilltt rraannggee

LOCATION

Position your set so that no bright light or sunlight falls directly onto the screen. Care should be taken

not to expose the set to any unnecessary vibration, moisture, dust or heat. Also ensure that the set is

placed in a position to allow a free flow of air. Do not cover the ventilation openings on the back cover.

If you intend to mount the set to a wall, attach VESA standard mounting interface (optional parts) to the

back of the set.

When you install the set to use the wall mounting bracket (optional parts), fix it carefully so as not to drop.

0

°

~ 3

°

12

°

~8

°

12

PREPARATION

KENSINGTON SECURITY SYSTEM

- The product is equipped with a Kensington Security System connector on the back panel. Connect the

Kensington Security System cable as shown below.

- For the detailed installation and use of the Kensington Security System, refer to the user’s guide provided

with the Kensington Security System.

For further information, contact

hhttttpp::////wwwwww..kkeennssiinnggttoonn..ccoomm

, the internet homepage of the

Kensington company. Kensington sells security systems for expensive electronic equipment such as note-

book PCs and LCD projectors.

NOTE

- The Kensington Security System is an optional accessory.

NOTES

a. If the product feels cold to the touch, there may be a small “flicker” when when it is turned on.

This is normal, there is nothing wrong with product.

b. Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots.

However, they have no adverse effect on the monitor's performance.

c. Avoid touching the LCD screen or holding your finger(s) against it for long periods of time.

Doing so may produce some temporary distortion effects on the screen.

13

PREPARATION

AV 3

L/MONO

R

AUDIO

VIDEO

S-VIDEO

AUDIO

VIDEO

AV 1 AV 2

ANTENNA

IN

EJECT

HDMI/DVI IN 1 HDMI IN 2

PCMCIA

CARD SLOT

RS-232C IN

AV 3

L/MONO

R

AUDIO

VIDEO

S-VIDEO

AUDIO

VIDEO

AV 1 AV 2

ANTENNA

IN

EJECT

HDMI/DVI IN 1 HDMI IN 2

PCMCIA

CARD SLOT

RS-232C IN

■

For optimum picture quality, adjust antenna direction.

■

An antenna cable and converter are not supplied.

■

To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment.

Multi-family Dwellings/Apartments

(Connect to wall antenna socket)

Single-family Dwellings /Houses

(Connect to wall jack for outdoor antenna)

Outdoor

Antenna

(VHF, UHF)

Wall

Antenna

Socket

RF Coaxial Wire (75 ohm)

ANTENNA CONNECTION

Antenna

UHF

Signal

Amplifier

VHF

■

In poor signal areas,to get better picture quality, install a signal amplifier to the antenna as shown to the right.

■

If signal needs to be split for two TVs,use an antenna signal splitter for connection.

- Be careful not to bend the bronze

wire when connecting to an antenna

port.

- 5V antenna power works In Digital

mode only. (Refer to p. 37)

14

EXTERNAL EQUIPMENT SETUP

Connect the SET TOP outputs to the

CCOOMMPPOONNEENNTT IINN

VVIIDDEEOO

sockets (YP

B P

R

) on the set.

Connect the audio cable from the SET TOP to

CCOOMMPPOO--

NNEENNTT IINN AAUUDDIIOO

sockets of the set.

Press the

II NN PP UUTT

button to select Component

(480i/576i/480p/576p/720p/1080i).

2

3

1

HD RECEIVER SETUP

■

To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment.

■

Here shown may be somewhat different from your set.

When connecting with a component cable

Y

P

B

PR

LR

VIDEO

COMPONENT IN

AUDIO

1

2

Signal

480i/576i

480p/576p

720p/1080i

1080 p

Component

Yes

(only 60Hz)

HDMI

No

Yes

15

EXTERNAL EQUIPMENT SETUP

When connecting with a HDMI

Connect the HDMI output of the digital set-top box to the

HHDDMMII//DDVVII IINN

jack on the set.

Select HDMI/DVI (DTV) input source with using the

IINNPPUUTT

button on the remote control.

2

1

HDMI/DVI IN

1

Connect the digital set-top box to

HHDDMMII//DDVVII IINN

jack on the set.

Connect the audio output of the digital set-top box to

the

AAUUDDIIOO IINN ((RRGGBB//DDVVII))

jack on the set.

Turn on the digital set-top box.

(

Refer to the owner’s

manual for the digital set-top box.

)

Select

HDMI/DVI input source with using the

IINNPPUUTT

button on the remote control.

2

3

4

1

When connecting with a HDMI to DVI cable

DVI OUTPUT

AUDIO

RL

HDMI/DVI IN

AUDIO IN

(RGB/DVI)

1

2

Input

DTV

TV

AV1

AV2

Component

RGB

HDMI

GG

DTV

OK

MENU EXIT

GUIDE

INFO

i

NOTE

!

GG

When the output device is HDMI / DVI Settop box or DVD.

GG

If the output device does not meet the selected HDMI mode, the abnormal or black screen may

be displayed.

GG

In this case, select the HDMI mode appropriate for the output device, and turn off the DC power

and then turn on it again.

16

EXTERNAL EQUIPMENT SETUP

DVD SETUP

When connecting with a component cable

AV 1 AV 2

Y

P

B

PR

LR

VIDEO

COMPONENT IN

AUDIO

Component Input ports

To get better picture quality, connect a DVD player to the component input ports as shown below.

Component ports on the set

YPB PR

Video output ports

on DVD player

Y

P

B

B-Y

Cb

Pb

P

R

R-Y

Cr

Pr

Connect the video output sockets (YP

B PR

) of the DVD to

the

CCOOMMPPOONNEENNTT IINN VVIIDDEEOO

sockets (YP

B PR

) of the

set.

Connect the audio cable from the DVD to

CCOOMMPPOONNEENNTT

IINN AAUUDDIIOO

sockets of the set.

Press the

IINNPPUUTT

button to select

Component.

Press the

PPLLAAYY

button on the DVD.

The DVD playback picture appears on the screen.

2

3

4

1

1 2

17

EXTERNAL EQUIPMENT SETUP

HDMI/DVI IN

AV 1 AV 2

(R) AUDIO (L)

AUDIO/

VIDEO

AV 1 AV 2

When connecting with a Euro Scart

Connect the Euro scart socket of the DVD to the Euro scart

socket of the set.

Press the

IINNPPUUTT

button to select

AV 1 .

Press the

PPLLAAYY

button on the DVD.

The DVD playback picture appears on the screen.

2

3

1

NOTE

!

GG

Please use the shield scart cable.

When connecting HDMI cable

Connect the HDMI output of the DVD to the

HHDDMMII//DDVVII IINN

jack on the set.

Select HDMI/DVI (DTV) input source with using

the

IINNPPUUTT

button on the remote control.

2

1

GG

Set can receive the video and audio signal simultaneously with using a HDMI cable.

GG

If the DVD supports Auto HDMI function, the output resolution of the source device will be automatically set to 1280x720p.

GG

If the DVD player does not support Auto HDMI, you need to set the DVD output resolution appropriately.

To get the best picture quality, adjust the output resolution of the source device to 1280x720p.

GG

When the output device is HDMI / DVI Settop box or DVD.

GG

If the output device does not meet the selected HDMI mode, the abnormal or black screen may be displayed.

GG

In this case, select the HDMI mode appropriate for the output device, and turn off the DC power and then turn on it again.

NOTE

!

Input

DTV

TV

AV1

AV2

Component

RGB

HDMI

GG

DTV

OK

MENU EXIT

GUIDE

INFO

i

18

EXTERNAL EQUIPMENT SETUP

VCR SETUP

■

To avoid picture noise (interference), leave an adequate distance between the VCR and set.

■

Typically a frozen still picture from a VCR. If the 4:3 picture format is used; the fixed images on the sides of

the screen may remain visible on the screen.

OUTPUT

SWITCH

ANT IN

R

S-VIDEO VIDEO

ANT OUT

L

ANTENNA IN

AV 1 AV 2

Wall Jack

Antenna

1

2

When connecting with an antenna

Connect the RF out socket of the VCR to the aerial socket of the set.

Connect the aerial cable to the RF aerial in socket of the VCR.

Store the VCR channel on a desired programme number using the ‘Manual

programme tuning’ section.

Select the programme number where the VCR channel is stored.

Press the

PPLLAAYY

button on the VCR.

1

2

3

4

5

19

EXTERNAL EQUIPMENT SETUP

(R) AUDIO (L)

AUDIO/

VIDEO

AV 1V 1 AV 2V 2

When connecting with a Euro Scart

Connect the Euro scart socket of the VCR to the Euro scart

socket of the set.

Press the

PPLLAAYY

button on the VCR.

If your VCR outputs an AV switching signal via the Scart

lead the set will auto switch to

AV 1 mode on start of

playback, but if you want to keep on watching in TV

mode, press the

DD

//

EE

or NUMBER buttons.

Otherwise press the

IINNPPUUTT

button on the remote control

handset to select

AV 1 . The VCR play back picture appears

on the screen.

You can also record programmes received by the set on

video tape.

2

1

NOTE

!

GG

Signal type RGB, i.e. the signals red, green and blue can only be selected for the Euro scart and the AV1

can be received. These signals are transmitted, for example, by a pay TV decoder, game machine or

photo CD unit, etc.

GG

Please use shielded scart cable.

Insert the CI Module to

PPCCMMCCIIAA

(Personal Computer

Memory Card International Association)

CCAARRDD SSLLOOTT

of set as shown.

For further information, see p.40.

1

INSERTION OF CI MODULE

PCMCIA

CARD SLOT

TVTVTV

-- TToo vviieeww tthhee ssccrraammbblleedd ((ppaayy)) sseerrvviicceess iinn ddiiggiittaall TTVV

mmooddee..

-- TThhiiss ffeeaattuurree iiss nnoott aavvaaiillaabbllee iinn aallll ccoouunnttrriieess..

1

20

EXTERNAL EQUIPMENT SETUP

PC SETUP

This product provides Plug and Play capability, meaning that the PC adjusts automatically to the set's settings.

When connecting with a D-sub 15 pin cable

RGB OUTPUT

AUDIO

AUDIO IN

(RGB/DVI)

RGB (PC) IN

1

2

4

Connect the signal cable from the monitor output socket of

the PERSONAL COMPUTER to the PC input socket of the set.

Connect the audio cable from the PC to the

AAUUDDIIOO IINN

((RRGGBB//DDVVII))

sock-ets of the set.

Press the INPUT button to select RGB.

Switch on the PC, and the PC screen appears on the set.

The set can be operated as the PC monitor.

2

3

1

Page is loading ...

LG M228WD-BZ User manual

LG M228WD-BZ User manual

Related papers

Other documents