Yamaha BD-S1067 is a high-quality Blu-ray Disc Player that offers a wide range of features and capabilities to enhance your home entertainment experience. With its ability to play Blu-ray discs, DVDs, and CDs, as well as supporting various video and audio formats, the BD-S1067 ensures you can enjoy your favorite movies, music, and photos in stunning quality.
Yamaha BD-S1067 is a high-quality Blu-ray Disc Player that offers a wide range of features and capabilities to enhance your home entertainment experience. With its ability to play Blu-ray discs, DVDs, and CDs, as well as supporting various video and audio formats, the BD-S1067 ensures you can enjoy your favorite movies, music, and photos in stunning quality.
Software Update for BD-S1067
Page.1 of 7
IMPORTANT NOTICE
Do not attempt to update your Yamaha Blu-ray Disc Player using any other data file except those
provided directly from the Yamaha website.
Follow the instructions carefully and do not attempt any other procedures not specified in the
instructions provided by Yamaha.
Improperly updated products may cause improper operation, and any parts or service required to
restore proper operation will not be covered under the Yamaha Limited Warranty.
Choose your update method:
There are 3 methods you can choose from.
Network Update Method……………Page 2
(Recommended method if your Blu-ray Player is connected to the Internet.)
USB Thumb Drive Method…………Page 3
(A USB thumb drive is required.)
Update Disc Method…………………Page 5
(Burning update file onto CD-R disc is required.)
If an error occurs, see Troubleshooting section on the last page.
Software Update for BD-S1067
Page.2 of 7
Network Update Method
STEP 1 Power on and enter “Upgrade”
Enter “SETUP” menu and select “System” > “Upgrade” > “Network”.
STEP 2 Wait till the Blu-ray Player finds the update file
Follow the instructions on TV.
While update is in progress, DO NOT interrupt the power or press any
buttons.
When completed, Blu-ray player will reboot automatically.
Please allow up to 1 minute for the reboot process to finish.
note:
In case “Please select OK to upgrade to support 3D” appears on TV, follow
the instructions on TV to update.
While update is in progress, DO NOT interrupt the power or press any
buttons.
If “No valid upgrade file is found!” appears on TV, retry from STEP1.
STEP 3 Confirm updated version.
Enter “SETUP” menu and display “System Information” by pressing the
[LEFT] button on the remote control.
Confirm that the software version has been updated to the latest.
Congratulations!
You have completed the software update.
Your Blu-ray Disc Player is now ready for normal use.
Requirement:
-Internet connection
This can be checked by selecting the “Connection Test” in the setup menu.
See Troubleshooting section on the last page.
Software Update for BD-S1067
Page.3 of 7
USB Thumb Drive Method
STEP 1 Copy the update file to a USB thumb drive
Unzip the downloaded file “BDS1067_Vxxxxx.zip”. “UPG” folder will appear.
Copy this folder to the root directory of a USB thumb drive that supports USB
Mass Storage Class. (It is recommended to delete all other files or folders.)
STEP 2 Insert the USB thumb drive
USB port is located at the lower left corner, below the [power] button.
STEP 3 Power on and enter “Upgrade”
Enter “SETUP” menu and select “System” > “Upgrade” > “USB Storage”.
The Blu-ray player will search for the software update file. Wait till the
upgrade file is found.
If the software in the USB thumb drive is the same as the software version
currently in the Blu-ray Disc Player, the message “No valid upgrade file is
found!” will appear.
STEP 4 Follow the instructions on TV and start update
While update is in progress, DO NOT interrupt the power or press any
buttons.
When completed, Blu-ray player will reboot.
Please allow up to 1 minute for the reboot process to finish.
USB Port
Requirements:
- USB thumb drive, with enough free space to store over 36MB.
(File system with FAT16 or FAT32 format)
- Software file provided by YAMAHA,”BDS1067_Vxxxxx.zip”.
Software Update for BD-S1067
Page.4 of 7
note:
In case “Please select OK to upgrade to support 3D” appears on TV, follow
the instructions on TV to update.
While update is in progress, DO NOT interrupt the power or press any
buttons.
If “No valid upgrade file is found!” appears on TV, retry from STEP1.
STEP 5 Remove the USB thumb drive and confirm updated version
Enter “SETUP” menu and display “System Information” by pressing the
[LEFT] button on the remote control.
Confirm that the software version has been updated to the latest.
Congratulations!
You have completed the software update.
Your Blu-ray Disc Player is now ready for normal use.
Software Update for BD-S1067
Page.5 of 7
Update Disc Method
STEP 1 Preparation of update disc
Unzip the downloaded file “BDS1067_Vxxx.zip”. “UPG” folder will appear.
Burn this “UPG” folder onto a CD-R or CD-RW as data disc with ISO9660
format. Make sure the disc is finalized. This will be your update disc.
STEP 2 Load update disc
The Blu-ray player will automatically search for the software file once the disc
has been inserted. Wait till the upgrade file is found.
If the above message doesn’t appear automatically, enter “SETUP” menu
and select “System” > “Upgrade” > “Disc”.
If the software in the update disc is the same as the software version
currently in the Blu-ray Disc Player, the message “No valid upgrade file is
found!” will appear.
STEP 3 Follow instruction on TV and start update
Press [ENTER] on the remote control to start update.
While update is in progress, DO NOT interrupt the power or press any
buttons.
When completed, Blu-ray player will reboot automatically.
Please allow up to 1 minute for the reboot process to finish.
note:
In case “Please select OK to upgrade to support 3D” appears on TV, follow
the instructions on TV to update.
While update is in progress, DO NOT interrupt the power or press any
buttons.
If “No valid upgrade file is found!” appears on TV, retry from STEP1.
Software Update for BD-S1067
Page.6 of 7
STEP 4 Cancel the update and remove the update disc
After rebooting, the system will search for additional upgrade file from the
disc again. When “No valid upgrade file is found!” appears on TV, cancel
the upgrade and remove the update disc.
STEP 5 Confirm updated version
Enter “SETUP” menu and display “System Information” by pressing the
[LEFT] button on the remote control.
Confirm that the software version has been updated to the latest.
Congratulations!
You have completed the software update.
Your Blu-ray Disc Player is now ready for normal use.
Software Update for BD-S1067
Page.7 of 7
Troubleshooting
<Network Update Method>
Case 1: Determine if the Blu-ray Disc Player is connected to the Internet.
Solution: Perform “Connection Test”.
Enter Setup menu and select “Network” > “Connection Test”
< USB Thumb Drive Method >
Case 1: Blu-ray Disc Player cannot verify the u pdate file in the USB thumb
drive.
Check that the “UPG” folder is located in the root directory of the USB
thumb drive.
Check that no other folders are created in the USB thumb drive.
Make sure that the USB thumb drive is not password protected.
(Cannot read files from a security protected USB thumb drive)
Make sure the folder and file name of the update data has not been
renamed.
Try using another USB thumb drive.
Or, try the update disc method.
Case 2: Unintended error occurred during the update.
Solution: Power off and retry the update procedure from STEP 1 again.
(The Blu-ray Disc Player will restore original software version)
< Update Disc Method >
Case 1: After loading the up date disc, the Blu-ray Disc Player doesn’t
automatically start the update.
Make sure the update disc was finalized during the burn process.
Check that the “UPG” folder is located at the root directory of the disc
and is the only folder recorded in the disc.
Make sure the folder and file name of the update data has not been
renamed.
Burn the downloaded update file again using another disc.
(CD-R is recommended.)
Or, try the USB thumb drive method.
Case 2: Unintended error occurred during the update
Solution: Power off and retry the update procedure from STEP 1 again.
(The Blu-ray Disc Player will restore original software version)
“OK” or “FAILED” will appear.
In case of “FAILED”, check your
Internet Connection settings.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
Yamaha BD-S1067 is a high-quality Blu-ray Disc Player that offers a wide range of features and capabilities to enhance your home entertainment experience. With its ability to play Blu-ray discs, DVDs, and CDs, as well as supporting various video and audio formats, the BD-S1067 ensures you can enjoy your favorite movies, music, and photos in stunning quality.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
in other languages
- italiano: Yamaha BD-S1067 Manuale utente
- français: Yamaha BD-S1067 Manuel utilisateur
- español: Yamaha BD-S1067 Manual de usuario
- Deutsch: Yamaha BD-S1067 Benutzerhandbuch
- русский: Yamaha BD-S1067 Руководство пользователя
- Nederlands: Yamaha BD-S1067 Handleiding
- português: Yamaha BD-S1067 Manual do usuário
- dansk: Yamaha BD-S1067 Brugermanual
- polski: Yamaha BD-S1067 Instrukcja obsługi
- čeština: Yamaha BD-S1067 Uživatelský manuál
- Türkçe: Yamaha BD-S1067 Kullanım kılavuzu
- svenska: Yamaha BD-S1067 Användarmanual
- suomi: Yamaha BD-S1067 Ohjekirja
- română: Yamaha BD-S1067 Manual de utilizare
Related papers
Other documents
-
Vizio VBR110 Firmware Update Instructions
-
Samsung BD-F5100 User manual
-
Samsung BD-F5500E User manual
-
Samsung BD-F5700 User manual
-
-
Samsung BD-F5500 User manual
-
-
-
-