Short Form
Specifications
Exterior Body is one piece 18-gauge
stainless steel, reinforced on sides and
back with 16-gauge reinforced chan-
nels. Louvered vents on end panels
of cart permit air circulation and
heat dissipation. Unit mounted on 6”
(15.24cm) wide high modulas casters,
two locking, two fixed. Full perimeter
non-marking bottom bumper provided.
Top is constructed of 16-gauge stain-
less steel, welded, ground and pol-
ished into one integral unit securely
attached to the body framework. Top is
fabricated with square exterior corners
with top corner bumpers. Push handle
located at rear of unit.
Bottom is constructed of 16-gauge
stainless steel with floor kinked to floor
drain, plug provided (two drains on
double bay carts and one on single bay
carts). 14-gauge reinforcement caster
channels provided.
Door is constructed of 20-gauge
stainless steel mounted to unit on
three heavy-duty hinges. Foam insu-
lated to reduce noise and vibration.
Door to open on a full 270° swing
with positive latching in open or
closed positions.
Tray slides to be field adjustable
and removable; to accomodate tray
lengths from 16” (40.64cm) to 20.25”
(51.43cm) long and up to 15”
(38.1cm) wide. Tray slide is 2”
(5.08cm) wide with 4.5” (11.43cm)
spacing.
Optional Accessories and
Modifications:
• Laminate on all sides (not available
for top surface)
• 2” top rail (adds 2” to overall height
of unit)
Model DC20
PROJECT
ITEM #
QUANTITY DATE
APPROVAL
The Delfield Company, 980 S. Isabella Rd., Mt. Pleasant, MI 48858, U.S.A. • (800) 733-8821 • Fax (800) 669-0619 • www.delfield.com
Delfield reserves the right to make changes in design or specifications without prior notice. ©2002 The Delfield Company. All rights reserved. Printed in U.S.A.
Tray Delivery Cart
DC
MODEL NUMBER TRAY SHIP WEIGHT
NUMBER OF DOORS CAPACITY LBS./KG.
DC16 1 16 249/113
DC20 1 20 275/125
DC24 2 24 326/148
DC28 2 28 350/159
DC36 2 36 398/181
The Delfield Company, 980 S. Isabella Rd., Mt. Pleasant, MI 48858, U.S.A. • (800) 733-8821 • Fax (800) 669-0619 • www.delfield.com
Delfield reserves the right to make changes in design or specifications without prior notice. ©2002 The Delfield Company. All rights reserved. Printed in U.S.A.
MSDC 03/02
Mechanical Data — Standard Unit
Tray Delivery Cart
DC
PLAN VIEW
MODEL DC16
FRONT ELEVATION
END ELEVATION
REAR ELEVATION
PLAN VIEW
MODEL DC20
FRONT
ELEVATION
END ELEVATION
REAR ELEVATION
PLAN VIEW
MODEL DC24
END ELEVATION
FRONT ELEVATION
PLAN VIEW
MODEL DC28
END ELEVATION
FRONT ELEVATION
PLAN VIEW
MODEL DC36
END ELEVATION
FRONT ELEVATION
-
1
-
2
Delfield DC16 Datasheet
- Category
- Computer desks
- Type
- Datasheet
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI