LG 43UD79 User manual

Category
TVs & monitors
Type
User manual

This manual is also suitable for

www.lg.com
Please read the safety information carefully before using the product.
IPS LED Monitor (LED Monitor) Model List
Owner's Manual
IPS LED MONITOR
(LED MONITOR*)
*LG LED Monitors are LCD Monitors with LED Backlighting.
43UD79
43UD79T
2
ENG
ENGLISH
Contents
CONTENTS
20 - HDMI connection
21 Connecting Peripherals
21 - USB Cable connection - PC
22 Connecting to External Devices
22 - Connecting Headphones
23 USERSETTINGS
23 Activating the Main Menu
23 - Main Menu Features
24 User Settings
24 - Menu Settings
29 TROUBLESHOOTING
31 SPECIFICATIONS
31 43UD79
32 43UD79T
33 Factory Support Mode (Preset Mode, PC)
33 HDMI
34 DisplayPort / USB-C
35 HDMI Timing (Video)
35 Power LED
36 EXTERNALCONTROLDEVICE
SETUP
36 - Communication Parameters
36 - Transmission
36 - OK Acknowledgement
36 - Error Acknowledgement
37 - Command Reference List
3 LICENSE
4 ASSEMBLINGANDPREPARING
4 Product Components
5 Supported Drivers and Software
6 Component and Button Description
6 - How to Use the Joystick Button
7 - How to Use the Joystick Button
8 Input Connector
10 Moving and Lifting the Monitor
11 Installing the Monitor
11 - Assembling the stand base
12 - Assembling the stand base
13 - Using the cable holder
14 - Installing onto a table
15 - Adjusting the angle
15 - Using the Kensington lock
16 - Installing the wall mount plate
16 - Installing to a wall
18 REMOTECONTROL
19 USINGTHEMONITOR
19 Connecting to a PC
19 - HDMI connection
19 - DisplayPort connection
20 - USB-C connection
20 Connecting to AV Devices
3
ENG
ENGLISH
LICENSE
LICENSE
Each model has different licenses. Visit www.lg.com for more information on the license.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo
are trademarks or registered trademarks of HDMI Licensing LLC in the United States
and other countries.
The following content is only applied to the monitor which is sold in Europe market and which needs to meet the ErP
Directive:
* This monitor is set to be turned off automatically in 4 hours after you turned on display if there is no adjustment to
display.
* To make this setting be disabled, change the option to ‘Off’ in OSD menu of “Automatic Standby”.
VESA, VESA logo, DisplayPort compliance logo and DisplayPort compliance logo for
dual-mode source devices are all registered trademarks of the Video Electronics Stan-
dards Association.
The SuperSpeed USB Trident logo is a registered trademark of USB Implementers
Forum, Inc.
4
ENG
ENGLISH
ASSEMBLINGANDPREPARING
ASSEMBLINGANDPREPARING
ProductComponents
Please check whether all the components are included in the box before using the product. If there are missing com-
ponents, contact the retail store where you purchased the product. Note that the product and components may look
different from those shown here.
CD(Owner'sManual)/
Card
DisplayPortCable
( This cable is not included in
all countries. )
USBC-Ccable
( This cable is not included in
all countries. )
USBC-AGender
( This gender is not included
in all countries. )
StandBody
StandBase
StandBase 4Screws
CableHolder
CableHolder
BackDoor 4Screws
HDMICable
( This cable is not included
in all countries. )
( Depending on the country )
( This gender is not included in all
countries. )
PowerCord
Remotecontrol,
Batteries(AAA)
RS-232CGender
5
ENG
ENGLISH
ASSEMBLINGANDPREPARING
Always use genuine components to ensure safety and product performance.
The product warranty will not cover damage or injury caused by the use of counterfeit components.
It is recommend that use the supplied components.
If you use generic cables not certified by LG, the screen may not display or there may be image noises.
Note that the components may look different from those shown here.
Without prior notice, all information and specifications in this manual are subject to change to improve the
performance of the product.
To purchase optional accessories, visit an electronics store or online shopping site or contact the retail store
where you purchased the product.
CAUTION
NOTE
SupportedDriversandSoftware
Check the drivers and software supported by your product and refer to the manuals on the CD enclosed in the product
package.
Required and Recommended: You can download and install the latest version from the enclosed CD or from the
LGE website (www.lg.com).
Optional: You can download and install the latest version from the LGE website (www.lg.com).
DriversandSoftware InstallationPriority 43UD79,43UD79T
MonitorDriver Recommended O
OnScreenControl Recommended O
DualController Optional O
6
ENG
ENGLISH
ASSEMBLINGANDPREPARING
HowtoUsetheJoystickButton
You can easily control the functions of the monitor by pressing the joystick button or moving it left/right with your
finger.
BasicFunctions
Poweron
Press the joystick button once with your finger to turn on the
monitor.
Poweroff
Press and hold the joystick button once with your finger to turn off the
monitor.
/
Volume
Control
You can control the volume by moving the joystick button left/right.
ComponentandButtonDescription
Power LED
On: power is on
Off: power is off
Joystick Button
y
The joystick button is located at the bottom of the monitor.
NOTE
43UD79
IR Receiver
7
ENG
ENGLISH
ASSEMBLINGANDPREPARING
HowtoUsetheJoystickButton
You can easily control the functions of the monitor by pressing the joystick button or moving it left/right with your
finger.
BasicFunctions
Poweron
Press the joystick button once with your finger to turn on the
monitor.
Poweroff
Press and hold the joystick button once with your finger to turn off the
monitor.
/
Volume
Control
You can control the volume by moving the joystick button left/right.
Power LED
On: power is on
Off: power is off
Joystick Button
y
The joystick button is located at the bottom of the monitor.
NOTE
43UD79T
IR Receiver
8
ENG
ENGLISH
ASSEMBLING AND PREPARING
Input Connector
43UD79
9
ENG
ENGLISH
ASSEMBLING AND PREPARING
43UD79T
10
ENG
ENGLISH
ASSEMBLING AND PREPARING
Moving and Lifting the Monitor
When moving or lifting the monitor, follow these in-
structions to prevent the monitor from being scratched
or damaged and to ensure safe transportation regard-
less of its shape or size.
y
As far as possible, avoid touching the monitor
screen. This may result in damage to the screen or
some of the pixels used to create images.
y
It is advisable to place the monitor in the original
box or packing material before attempting to
move it.
y
Before moving or lifting the monitor, disconnect
the power cord and all cables.
y
Hold the top and bottom of the monitor frame
firmly. Do not hold the screen itself.
y
When holding the monitor, the screen should face
away from you to prevent it being scratched.
y
When moving the monitor, avoid any strong shock
or vibrations to the product.
y
When moving the monitor, keep it upright, never
turn the monitor on its side or tilt it sideways.
CAUTION
y
If you use the monitor panel without the stand
base, its joystick button may cause the monitor to
become unstable and fall, resulting in damage to
the monitor or human injury. In addition, this may
cause the joystick button to malfunction.
Or
11
ENG
ENGLISH
ASSEMBLING AND PREPARING
Installing the Monitor
Assembling the stand base
y
To avoid injury to the fingers and foot when
Assembly Stand Body and Base, should hold
Base when assem-bly stand body and base.
y
Do not apply foreign substances (oils, lubricants,
etc.) to the screw parts when assembling the
product.
(Doing so may damage the product.)
1
Please put a soft cloth on a low table or box to
protect the screen of the monitor.
2
Please put the monitor on the soft cloth with the
screen facing down.
Turn the screw clockwise to secure the stand base.
3
1
2
Assemble the Head and Stand body.
1
2
Assemble the Stand body and Stand base .
CAUTION
4
Assemble the Head and Back door.
43UD79
12
ENG
ENGLISH
ASSEMBLING AND PREPARING
Assembling the stand base
y
To avoid injury to the fingers and foot when
Assembly Stand Body and Base, should hold
Base when assem-bly stand body and base.
y
Do not apply foreign substances (oils, lubricants,
etc.) to the screw parts when assembling the
product.
(Doing so may damage the product.)
1
Please put a soft cloth on a low table or box to
protect the screen of the monitor.
2
Please put the monitor on the soft cloth with the
screen facing down.
CAUTION
43UD79T
3
Assemble the Stand base and Head.
Turn the screw clockwise to secure the stand base.
13
ENG
ENGLISH
ASSEMBLING AND PREPARING
y
Illustrations in this document represent typical
procedures, so they may look different from the
actual product.
y
Do not carry the monitor upside down by just
holding the stand base. This may cause the
monitor to fall off the stand and could result in
personal injury.
y
When lifting or moving the monitor, do not
touch the monitor screen. The force applied to
the monitor screen may cause damage to it.
y
Do not apply foreign substances (oils, lubricants,
etc.) to the screw parts when assembling the
product. (Doing so may damage the product.)
y
Applying excessive force when tightening screws
may cause damage to the monitor. Damage
caused in this way will not be covered by the
product warranty.
CAUTION
Using the cable holder
Arrange the cables using the cable holder as shown in
the illustration.
y
You can disassemble the stand in the reverse
order of the assembly.
NOTE
43UD79T
43UD79
Cable Holder
14
ENG
ENGLISH
ASSEMBLING AND PREPARING
Installing onto a table
1
Lift the monitor and place it on the table in an up-
right position.
Place at least 100 mm away from the wall to ensure
sufficient ventilation.
Cautions When Connecting Power Cord
2
Connect the Power cord to the monitor, then plug
the power cord into the wall outlet.
100 mm
100 mm
100 mm
100 mm
y
Unplug the power cord prior to moving or install-
ing the monitor. There is risk of electric shock.
y
Make sure to use the power cord that is pro-
vided in the product package and connect it to a
grounded power outlet.
y
If you need another power cord, please contact
your local dealer or the nearest retail store.
CAUTION
3
Press the joystick button on the bottom of the
monitor to turn on the monitor.
100-240 V~
100 mm
100 mm
100 mm
100 mm
Or
Or
15
ENG
ENGLISH
ASSEMBLING AND PREPARING
Or
Or
Adjusting the angle
1
Place the monitor in an upright position, mounted
on the stand base.
2
Adjust the angle of the screen. The angle of the
screen can be adjusted forwards or backwards for a
comfortable viewing experience.
Front SideRear Side
y
To avoid injury to the fingers when adjusting the
screen, do not hold the lower part of the moni-
tor's frame as illustrated below.
WARNING
y
Be careful not to touch or press the screen area
when adjusting the angle of the monitor.
y
Use of the Kensington lock is optional.
The accessories can be purchased at your local
electronics store.
NOTE
Using the Kensington lock
The Kensington security system connector is located at
the back of the Monitor set.
For more information on installation and usage, refer to
the Kensington lock user manual or visit the website at
http://www.kensington.com.
Connect the Kensington security system cable between
the Monitor set and a table.
43UD79
43UD79
16
ENG
ENGLISH
ASSEMBLING AND PREPARING
To install the monitor to a wall, attach a wall mounting
bracket (optional) to the back of the monitor.
Make sure that the wall mounting bracket is securely fixed
to the monitor and to the wall.
1 If you use screw longer than standard, the monitor
might be damaged internally.
2 If you use improper screw, the product might be dam-
aged and drop from mounted position.
In this case, LG Electronics is not responsible for it.
Installing to a wall
Install the monitor at least 100 mm away from the wall
and leave about 100 mm of space at each side of the
monitor to ensure sufficient ventilation. Detailed instal-
lation instructions can be obtained from your local retail
store. Please refer to the manual to install and set up a
tilting wall mounting bracket.
100 mm
100 mm
100 mm
100 mm
Wall Mount (A x B) 200 x 200
Standard screw M6
Number of screws 4
Wall Mount Plate
(Optional)
LSW240B
Installing the wall mount plate
This monitor supports the specification of the standard
wall mount plate or compatible device.
1
Place the screen face down. To protect the screen
from scratches, cover the surface with a soft cloth.
2
Place the wall mount plate onto the monitor and
align it with the screw holes.
3
Tighten the four screws to fix the plate to the moni-
tor using a screwdriver.
y
The wall mount plate is sold separately.
y
For more information on installation, refer to the
wall mount plate's installation guide.
y
Be careful not to use excessive force when
mounting the wall mount plate, as this can dam-
age the monitor's screen.
NOTE
17
ENG
ENGLISH
ASSEMBLING AND PREPARING
y
Unplug the power cord before moving or installing
the monitor to avoid electric shocks.
y
Installing the monitor on the ceiling or on a slanted
wall may result in the monitor falling off, which
could lead to injury. Please use the genuine LG wall
mounting bracket. For more information, contact
your local retail store or a qualified installer.
y
Applying excessive force when fastening screws
may cause damage to the monitor. Damage caused
in this way will not be covered by the product war-
ranty.
y
Use the wall mounting bracket and screws that
conform to the VESA standard. Damage caused
by the use or misuse of inappropriate components
will not be covered by the product warranty.
y
Use the screws specified by the VESA standard.
y
The wall mount kit includes the installation guide
and all necessary parts.
y
The wall mounting bracket is optional. The acces-
sories can be purchased at your local retail store.
y
The length of the screw may differ for each wall
mounting bracket. Ensure the correct length
screw is used.
y
For more information, please refer to the user
manual for the wall mounting bracket.
CAUTION
NOTE
y
Wall Mount (A x B)
A
B
18
ENG
ENGLISH
REMOTE CONTROL
REMOTE CONTROL
The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully to
use the monitor correctly.
To install batteries, open the battery cover, place batteries (1.5 V AAA) matching
and terminals to the labels
inside the compartment, and close the battery cover.
To remove the batteries, perform the installation actions in reverse. The illustrations may differ from the actual
accessories.
y
Do not mix old and new batteries, as this may
damage the remote control.
y
Be sure to point the remote control toward the
remote control sensor on the monitor.
y
The GAME MODE and PICTURE MODE are
disabled when PBP/PIP on
CAUTION
(POWER) Turns the monitor on or off.
INPUT Selects the input mode.
Volume Up/Down Button Adjusts the volume.
MUTE Mutes all sounds.
BRIGHTNESS Adjust the brightness by pressing the Up and
Down buttons on the remote control.
MENU Configures the screen setting
/ /
/
Configures the options by moving the up/down/left/right button
EXIT Exits the main menu
OK Selects menus or options and confirms your input.
GAME MODE Enters the Game features.
PICTURE MODE Selects the picture mode
PBP/PIP Change PBP/PIP mode
FULL SCREEN Converts the sub screen in PBP/PIP mode to wide
screen.
AUDIO SELECT Change the audio output in PBP/PIP mode
19
ENG
ENGLISH
USING THE MONITOR
USING THE MONITOR
Connecting to a PC
y
This monitor supports the *Plug and Play feature.
*Plug and Play: A feature that allows you to add
a device to your computer without having to
reconfigure anything or install any manual drivers.
y
There may be no video or audio output depending
on the DP version of the PC.
y
If you use generic cables not certified by LG, the
screen may not display or there may be image
noises.
DisplayPort connection
Transmits the digital video and audio signals from your
PC to the monitor. Connect your PC to the monitor us-
ing the DisplayPort cable as illustrated below.
Press the menu button and then select the input option
from the input menu.
NOTE
HDMI connection
Transmits the digital video and audio signals from your
PC and A/V devices to the monitor. Connect your PC
and AV device to the monitor with the HDMI cable as
illustrated below.
Press the menu button and then select the input option
from the input menu.
NOTE
y
If you use HDMI PC, it can cause compatibility
problem.
y
Use a certified cable with the HDMI logo attached.
If you do not use a certified HDMI cable, the
screen may not display or a connection error may
occur.
y
Recommended HDMI cable types
- High-Speed HDMI
®
/
TM
Cable
- High-Speed HDMI
®
/
TM
Cable with Ethernet
- HDMI 1/2 only support 4K@30Hz
- HDMI 3/4 can support 4K@60Hz
20
ENG
ENGLISH
USING THE MONITOR
y
PD(Power Delivery) and DP Alternate Mode(DP
over USB-C) are supported via USB-C Port.
y
Features may not work properly depending on
the connected device’s specifications and the
environment.
y
USB-C port is not for the Monitor Power source
but for a PC power source.
Connect Adapter to supply power to the Monitor
USB-C connection
Transmits digital video and audio signals from your PC
to the monitor.
Connect the monitor to your PC using the USB C-C
cable as shown in the illustration below.
Press the menu button and then select the input option
from the input menu.
NOTE
(USB C-C cable)
Connecting to AV Devices
HDMI connection
Transmits the digital video and audio signals from your
PC and A/V devices to the monitor. Connect your PC
and AV device to the monitor with the HDMI cable as
illustrated below.
Press the menu button and then select the input option
from the input menu.
NOTE
y
Use a certified cable with the HDMI logo attached.
If you do not use a certified HDMI cable, the
screen may not display or a connection error may
occur.
y
Recommended HDMI cable types
- High-Speed HDMI
®
/
TM
Cable
- High-Speed HDMI
®
/
TM
Cable with Ethernet
- HDMI 1/2 only support 4K@30Hz
- HDMI 3/4 can support 4K@60Hz
(USB C-C cable +
USB C-A Gender)
(sold separately)
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39

LG 43UD79 User manual

Category
TVs & monitors
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI