MQ Multiquip Mixer-Concrete-Mortar Operating instructions

Brand
MQ Multiquip
Model
Mixer-Concrete-Mortar
Type
Operating instructions

MQ Multiquip Mixer-Concrete-Mortar is a versatile tool designed for mixing concrete and mortar. With its powerful engine, durable construction, and user-friendly features, it can handle a wide range of mixing tasks, from small home projects to large-scale commercial applications. The mixer features a sturdy steel frame that provides stability and durability, even when working with heavy materials. The large drum capacity allows for efficient mixing of large batches, saving time and effort.

MQ Multiquip Mixer-Concrete-Mortar is a versatile tool designed for mixing concrete and mortar. With its powerful engine, durable construction, and user-friendly features, it can handle a wide range of mixing tasks, from small home projects to large-scale commercial applications. The mixer features a sturdy steel frame that provides stability and durability, even when working with heavy materials. The large drum capacity allows for efficient mixing of large batches, saving time and effort.

The following instructions are intended to assist the user in adding motor oil to the engine
crankcase. Please read these instructions before operating mixer.
Concrete and Mortar Mixer
Engine Crankcase Oil Filling Instructions
Operating the engine with
no oil or low oil
can
cause severe engine damage. Always check engine
oil level before operating mixer.
When adding motor oil to the engine crankcase always
use 4-stroke motor oil that meets or exceeds the
requirements for API service classification SJ, SL, or
the equivalent. Always check the API service label on
the oil container to be sure it contains the letters SJ,
SL, or equivalent.
SAE 10W-30 is recommended for general use. Other
viscosities shown in Table 1 may be used when the
average temperature in your area is within the the
indicated range.
OIL FILLER CAP/DIPSTICK
OIL FILL HOLE
(BOTTOM EDGE)
Figure 1. Engine Oil Dipstick (Removal)
Engine Oil Level Check
1. To add motor oil to the the engine crankcase, place
the mixer on secure level ground with the engine
stopped.
2. Remove the dipstick (Figure 1) from the engine oil
fill hole.
3. Using a funnel, fill with recommended oil (Table 1)
to the upper limit (Figure 2) mark on the oil fill hole.
(bottom edge). DO NOT overfill.
NOTE
For correct oil capacity (engine
crankcase), read Operation
Manual or Engine Owner’s
Manual.
UPPER LIMIT
LOWER LIMIT
Figure 2. Engine Oil Dipstick (Oil Level)
© COPYRIGHT 2005, MULTIQUIP INC.
Atlanta • Boise • Dallas • Houston • Newark
Montreal, Canada • Manchester, UK
Rio De Janiero, Brazil • Guadalajara, Mexico
MULTIQUIP INC.
POST OFFICE BOX 6254 • CARSON, CA 90749
310-537-3700 • 800-421-1244 • FAX: 310-537-3927
E-MAIL: [email protected] • WWW:
multiquip.com
WARNING
Figure 3. Reduction Case
Reduction Case Oil Level Check
1. For
5.5 HP
engines (1/6 gear reduction), remove
the filler bolt and oil level bolt (Figure 3). If oil begins
to leak out from the reduction case as the oil level
bolt is being removed, it can be assumed the
reduction case oil level is correct.
2. If oil is not leaking from the reduction case, fill the
reduction case with the same oil that is recom-
mended for the engine. Fill until oil starts to flow
from the oil level bolt hole.
  • Page 1 1

MQ Multiquip Mixer-Concrete-Mortar Operating instructions

Brand
MQ Multiquip
Model
Mixer-Concrete-Mortar
Type
Operating instructions

MQ Multiquip Mixer-Concrete-Mortar is a versatile tool designed for mixing concrete and mortar. With its powerful engine, durable construction, and user-friendly features, it can handle a wide range of mixing tasks, from small home projects to large-scale commercial applications. The mixer features a sturdy steel frame that provides stability and durability, even when working with heavy materials. The large drum capacity allows for efficient mixing of large batches, saving time and effort.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents