Hama 00042511 Owner's manual

Page is loading ...

2

G Operating instruction

Thank you for choosing a Hama product.

Take your time and read the following instructions and

information completely. Please keep these instructions in a

safe place for future reference. If you sell the device, please

pass these operating instructions on to the new owner.

1. Package Contents

•RF Modulator

•These operating instructions

2. Safety Notes

• The product is intended for private, non-commercial

use only.

• The product is intended for indoor use only.

•Keep this product, as all electrical products, out of the

reach of children!

•Connect the product only to a socket that has been

approved for the device. The electrical socket must

always be easily accessible.

• Disconnect the product from the network using the

power button – if this is not available, unplug the

power cord from the socket.

•Do not use the product if the AC adapter, adapter

cable or power cable is damaged.

• Do not attempt to service or repair the product yourself.

Leave any and all service work to qualied experts.

•

Do not open the device or continue to operate it if it

becomes damaged.

3. Functions

The RF modulator allows you to convert audio and video

signals into high-frequency antenna signals.

4. Connection options

4.1 Connection via scart cable

•Connect the modulator to the intended signal source

with a scart cable (e.g. DVD player, SAT receiver...).

•Connect the antenna connection cable to the TV/

VCR socket and connect the other end of the cable to

your TV/VCR.

4.2 Connection via RCA cables

•Connect the modulator to the intended signal source

with a three-way RCA cable (e.g. DVD player, SAT

receiver). Check the colour markings on the connection

socket and plug when connecting.

•Connect the antenna connection cable to the TV/

VCR socket and connect the other end of the cable to

your TV/VCR.

4.3 Connection via antenna cables

•Connect your terrestrial antenna or every other device

with an RF connection with the RF modulator to the

aerial socket (RF input socket ).

•Connect the antenna connection cable to the TV/

VCR socket and connect the other end of the cable to

your TV/VCR.

Note

Two devices can be connected to the RCA and scart

terminal at the same time, but only one device (either

to the RCA or scart connection) can be active.

5. Getting started

•Ensure that all input and output devices are correctly

connected.

•Connect the RF modulator to the enclosed power supply.

•Switch on the RF modulator with the ON/OFF switch.

The red LED illuminates during operation.

•Switch on a connected device (e.g. DVD Player;

surveillance camera; SAT receiver).

•Set your TV to channel 36.

(This is the standard specied channel)

•Now you should see the playback of your input signal

on your TV.

6. RF modulator settings

6.1 Default channel display

If you changed the standard channel accidentally or

deliberately, you can view the current set channel as

described below:

•Switch the RF modulator off

•Press the CH h button and switch on the device

•The set channel will be displayed by the blinking

signal LED.

•Example: Channel 36: 3x ashes, short pause,

6x ashes

Channel 42: 4x ashes, short pause, 2x ashes

Note

The channel display can be turned off only by

switching the RF modulator off (ON/OFF switch).

3

6.2 Changing channel

•The Hama RF modulator offers you the option of using

all UHF channels from channel 21 to 69.

•Some channels are already assigned by existing

transmitters. This could lead to interferences.

•We recommend that you select a free channel when

using the modulator, to prevent any interferences.

•You can change the set standard channel by pressing

the CH i and CH h buttons.

•Move down through the channels by pressing the

CH i button and move up through the channels by

pressing the CH h button.

•The set channel is automatically saved.

Note

Each time a channel is changed on the RF modulator,

the channel on your TV/VCR must be adjusted

accordingly and saved.

6.3 Resetting the modulator to factory settings

To reset the RF modulator to factory settings, proceed

as follows:

•Switch the modulator off

•Press and hold the CH i and CH h buttons

•Switch the modulator back on and release the CH i

and CH h buttons

•The RF modulator is set back to the standard channel 36

Note

When using a different power supply unit, make sure

that the features match!

7. Care and Maintenance

•Only clean this product with a slightly damp, lint-free

cloth and do not use aggressive cleaning agents.

•Make sure that water does not get into the product.

8. Warranty Disclaimer

Hama GmbH & Co. KG assumes no liability and provides

no warranty for damage resulting from improper

installation/mounting, improper use of the product or

from failure to observe the operating instructions and/

or safety notes.

9. Service and Support

Please contact Hama Product Consulting if you have any

questions about this product.

Hotline: +49 9091 502-115 (German/English)

Further support information can be found here:

www.hama.com

10. Recycling Information

Note on environmental protection:

After the implementation of the European

Directive 2012/19/EU and 2006/66/EU in the

national legal system, the following applies:

Electric and electronic devices as well as

batteries must not be disposed of with

household waste. Consumers are obliged by law to return

electrical and electronic devices as well as batteries at

the end of their service lives to the public collecting

points set up for this purpose or point of sale. Details to

this are dened by the national law of the respective

country. This symbol on the product, the instruction

manual or the package indicates that a product is subject

to these regulations. By recycling, reusing the materials

or other forms of utilising old devices/Batteries, you are

making an important contribution to protecting our

environment.

Page is loading ...

00042511/06.16

All listed brands are trademarks of the corresponding companies. Errors and omissions excepted,

and subject to technical changes. Our general terms of delivery and payment are applied.

Hama GmbH & Co KG

86652 Monheim

/Germany

www.hama.com

Hama 00042511 Owner's manual

Hama 00042511 Owner's manual

in other languages

Related papers

Other documents