LG LHD657M Owner's manual

Please read this manual carefully before operating

your set and retain it for future reference.

LHD657M (LHD657M, S67T4-S, S67T4-C, S67T2-W)

OWNER’S MANUAL

DVD Home

Theater

System

*MFL69677604*

www.lg.com

1 Getting Started

Getting Started2

Getting Started

1

Safety Information

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

This lightning ash with arrowhead

symbol within an equilateral triangle

is intended to alert the user to the

presence of uninsulated dangerous

voltage within the product’s

enclosure that may be of sufcient

magnitude to constitute a risk of

electric shock to persons.

The exclamation point within an

equilateral triangle is intended

to alert the user to the presence

of important operating and

maintenance (servicing)

instructions in the literature

accompanying the product.

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK

HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN

OR MOISTURE.

CAUTION: The apparatus should not be exposed to

water (dripping or splashing) and no objects lled

with liquids, such as vases, should be placed on the

apparatus.

WARNING: Do not install this equipment in a

conned space such as a book case or similar unit.

CAUTION: Do not use high voltage products around

this product. (ex. Electrical swatter) This product may

malfunction due to electrical shock.

CAUTION: Do not block any ventilation openings.

Install in accordance with the manufacturer’s

instructions.

Slots and openings in the cabinet are provided

for ventilation and to ensure reliable operation of

the product and to protect it from over heating.

The openings shall be never be blocked by placing

the product on a bed, sofa, rug or other similar

surface. This product shall not be placed in a built-

in installation such as a bookcase or rack unless

proper ventilation is provided or the manufacturer’s

instruction has been adhered to.

CAUTION: This product employs a Laser System.

To ensure proper use of this product, please read

this owner’s manual carefully and retain it for future

reference. Shall the unit require maintenance, contact

an authorized service center.

Use of controls, adjustments or the performance of

procedures other than those specied herein may

result in hazardous radiation exposure.

To prevent direct exposure to laser beam, do not try

to open the enclosure.

CAUTION concerning the Power Cord

Most appliances recommend they be placed upon a

dedicated circuit;

That is, a single outlet circuit which powers only

that appliance and has no additional outlets or

branch circuits. Check the specication page of this

owner’s manual to be certain. Do not overload wall

outlets. Overloaded wall outlets, loose or damaged

wall outlets, extension cords, frayed power cords, or

damaged or cracked wire insulation are dangerous.

Any of these conditions could result in electric

shock or re. Periodically examine the cord of your

appliance, and if its appearance indicates damage

or deterioration, unplug it, discontinue use of the

appliance, and have the cord replaced with an exact

replacement part by an authorized service center.

Protect the power cord from physical or mechanical

abuse, such as being twisted, kinked, pinched, closed

in a door, or walked upon. Pay particular attention to

plugs, wall outlets, and the point where the cord exits

the appliance. The Power Plug is the disconnecting

device. In case of an emergency, the Power Plug must

remain readily accessible.

Getting Started 3

Getting Started

1

This device is equipped with a portable battery or

accumulator.

Safety way to remove the battery or the battery

from the equipment: Remove the old battery or

battery pack, follow the steps in reverse order than

the assembly. To prevent contamination of the

environment and bring on possible threat to human

and animal health, the old battery or the battery

put it in the appropriate container at designated

collection points. Do not dispose of batteries or

battery together with other waste. It is recommended

that you use local, free reimbursement systems

batteries and accumulators. The battery shall not be

exposed to excessive heat such as sunshine, re or

the like.

NOTICE: For safety marking information including

product identication and supply ratings, please refer

to the main label on the bottom or the other surface

of the product.

CAUTION: No naked ame sources, such as lighted

candles, should be placed on the apparatus.

Symbols

~ Refers to alternating current(AC).

0

Refers to direct current(DC).

Refers to class II equipment.

1

Refers to stand-by.

!

Refers to “ON” (power).

Refers to dangerous voltage.

Table of Contents4

1 Getting Started

2 Safety Information

4 Table of Contents

6 Unique Features

6 – Portable In

6 – USB Direct Recording

6 – Full HD up-scaling

6 – Home Theater Speaker ez Setup

6 – Bluetooth®

7 Introduction

7 – Playable Discs

7 – About the “7” Symbol Display

7 – Symbols Used in this Manual

7 – Regional Codes

8 Playable file Requirement

9 Remote control

10 Front panel

11 Rear panel

2 Connecting

12 Assembling the speaker

14 Attaching the speakers to the unit

15 Positioning the system

16 How to Affix the Ferrite Core

16 – Affix the Ferrite Core for HDMI cable

16 Connections to Your TV

17 – HDMI Out Connection

18 – What is SIMPLINK?

18 – Video Connection

19 – Resolution Setting

19 Video Output Resolution

20 Optional Equipment Connection

20 – AUX (L/R) INPUT Connection

20 – PORT. IN (Portable Input) Connection

20 – Listening to music from your portable

player or external device

21 – USB Connection

21 – OPTICAL IN connection

21 – Home theater speaker ez setup

22 – Antenna Connection

3 System Setting

23 Adjust the setup settings

23 – OSD Initial language settings - Optional

23 – To display and exit the Setup menu

24 – Language

24 – Display

25 – Audio

26 – Lock (Parental Control)

Table of Contents

Table of Contents 5

1

2

3

4

5

6

4 Operating

27 Using the Home Menu

27 Basic Operations

28 Other Operations

28 – Displaying Disc Information on-screen

28 – To display the DVD Menu

28 – To display the DVD title

28 – 1.5 times speed playback

28 – Screen Saver

28 – Starting play from selected time

28 – Resume playback

29 – Changing subtitle code page

29 – Marked Playback

30 – Viewing a PHOTO file

31 – Sleep Timer Setting

31 – Dimmer

31 – Turn off the sound temporarily

31 – Last Scene Memory

31 – Power Resume - Optional

31 – System Select - Optional

32 – Adjust the speaker level settings

32 – VOCAL FADER

32 – Auto power down

33 Radio Operations

33 – Listening to the radio

33 – Presetting the Radio Stations

33 – Deleting all the saved stations

33 – Deleting a saved station

33 – Improving poor FM reception

34 Sound adjustment

34 – Setting the surround mode

34 – Setting the USER EQ

35 Advanced Operations

35 – Recording to USB

36 Using a Bluetooth wireless technology

36 – Listening to music of a Bluetooth device

38 Auto function change

38 AUTO POWER On

5 Troubleshooting

39 Troubleshooting

6 Appendix

40 Maintenance

40 – Handling the Unit

40 – Notes on Discs

41 Area Code List

42 Language code List

43 Trademarks and Licenses

44 Specifications

Getting Started6

Getting Started

1

Unique Features

Portable In

Listen to music from your portable device. (MP3,

Notebook, etc.)

USB Direct Recording

Records music from CD to your USB device.

Full HD up-scaling

Views Full HD picture quality with simple setup.

Home Theater Speaker ez Setup

Listen to sounds from TV, DVD and Digital device with

vivid 5.1 (2.1 or 2.0) ch mode.

Bluetooth®

Listens to music stored on your Bluetooth device.

Getting Started 7

Getting Started

1

Introduction

Playable Discs

This unit plays DVD

±

R/RW and CD-R/RW that

contains audio titles, MP3, WMA and/or JPEG les.

Some DVD

±

RW/DVD

±

R or CD-RW/CD-R cannot

be played on this unit due to the recording quality or

physical condition of the disc, or the characteristics of

the recording device and authoring software.

DVD-VIDEO (8 cm/12 cm disc)

Discs such as movies that can be

purchased or rented.

DVD

±

R (8 cm/12 cm disc)

Video mode and nalized only.

DVD-RW (8 cm/12 cm disc)

Video mode and nalized only.

DVD+R: Video mode only

Supports the double layer disc also.

DVD+RW (8 cm/12 cm disc)

Video mode and nalized only.

Audio CD: Music CDs or CD-R/CD-

RW in music CD format that can be

purchased.

About the “

7

” Symbol Display

“

7

” may appear on your TV display during operation

and indicates that the function explained in this

owner’s manual is not available on that specic

media.

Symbols Used in this Manual

r

DVD-Video, DVD

±

R/RW in Video

mode or VR mode and nalized

t

Audio CDs

y

Video les contained in the USB/

Disc

u

Audio les contained in the USB/

Disc

i

Photo les contained in the USB/

Disc

,

Note

Indicates special notes and operating features.

,

Tip

Indicates tip and hints for making the task easier.

>

Caution

Indicates cautions for preventing possible damages

from abuse.

Regional Codes

This unit has a regional code printed on the unit.

This unit can play only DVD discs labeled same as the

unit or “ALL”.

y

Most DVD discs have a globe with one or more

numbers in it clearly visible on the cover. This

number must match your unit’s regional code or

the disc cannot play.

y

If you try to play a DVD with a different regional

code from your unit, the message “Check Regional

Code” appears on the TV screen.

Getting Started8

Getting Started

1

Playable file

Requirement

Music file requirement

MP3/ WMA le compatibility with this unit is limited

as follows :

y

Sampling frequency : within 32 to 48 kHz (MP3),

within 32 to 48 kHz (WMA)

y

Bit rate : within 32 to 320 kbps (MP3),

40 to 192 kbps (WMA)

y

Support Version : v2, v7, v8, v9

y

Maximum les : Under 999

y

File extensions : “.mp3”/ “.wma”

y

CD-ROM le format : ISO9660/ JOLIET

y

We recommend that you use Easy-CD Creator,

which creates an ISO9660 le system.

y

You have to set the disc format option to

[Mastered] in order to make the discs compatible

with the LG players when formatting rewritable

discs. When setting the option to Live File System,

you cannot use it on LG players.(Mastered/ Live

File System : Disc format system for Windows

Vista)

The DTS is not supported. In case of DTS audio

format, audio is not output.

Photo file requirement

Photo le compatibility with this unit is limited as

follows :

y

Max pixel in width : 2760 x 2048 pixel

y

Maximum les : Under 999

y

Some discs may not operate due to a different

recording format or the condition of disc.

y

File extensions: “.jpg”

y

CD-ROM le format : ISO9660/ JOLIET

Video file requirement

Video le compatibility with this unit is limited as

follows :

y

Available resolution: within 720 x 576 (W x H)

pixels.

y

The le name of the Video subtitle should be

entered within 45 characters.

y

If there is impossible code to express in the Video

le, it may be displayed as “ _ “ mark on the display.

y

Frame rate : less than 30 fps.

y

If the video and audio structure of recorded les is

not interleaved, either video or audio is outputted.

y

Playable Video le : “.avi”, “.mpg”, “.mpeg”

y

Playable Subtitle format : SubRip (*.srt/ *.txt),

SAMI (*.smi), SubStation Alpha (*.ssa/ *.txt),

MicroDVD (*.sub/ *.txt), SubViewer 2.0 (*.sub/

*.txt), Vobsub (*.sub)

y

Playable Codec format :

“Xvid”, “MPEG-1”, “MPEG-2”

y

Playable Audio format : “AC3”, “PCM”, “MP3”,

“WMA”,

y

Sampling frequency : within 32 to 48 kHz (MP3),

within 32 to 48 kHz (WMA)

y

Bit rate : within 32 to 320 kbps (MP3), 40 to 192

kbps (WMA)

y

For Discs formatted in Live le system, you can not

it on this unit.

y

If the name of movie le is different from that of

the subtitle le, during playback of a Video le,

subtitle may not be display.

y

If you play a Xvid le differ from Xvid spec, it may

not operate normally.

y

If you play GMC video le which is more than

1-warp point, video playback screen will not

smooth.

Getting Started 9

Getting Started

1

Replacement of battery

Remove the battery cover on the

rear of the remote control, and

insert the battery with 4 and 5

matched correctly.

• • • • • • • • •

a

• • • • • • •

1

(Standby/On) : Switches the

unit ON or OFF.

B

(Open/Close) : Opens and closes

the disc tray.

P

FUNCTION : Selects the

function and input source.

SLEEP : Sets the System to turn

off automatically at a specied

time.

(Dimmer : The display window will

be darken by half.)

MARKER : Marks play list.

n

(Home) : Displays the [Home

Menu].

• • • • • • • • •

b

• • • • • • •

m

INFO/DISPLAY : Accesses On-

Screen Display.

DISC MENU : Accesses the menu

on a DVD disc.

W/S/A/D

(up/ down/ left/

right) : Used to navigate on-screen

displays.

PRESET (

W/S

) : Selects

programme of Radio.

TUNING +/- : Tunes in the desired

radio station.

b

ENTER : Acknowledges menu

selection.

Presetting the radio stations.

x

RETURN : Moves backwards

in the menu or exits the setup

menu.

TITLE : If the current DVD title has

a menu, the title menu appears

on the screen. Otherwise, the disc

menu may not appear.

• • • • • • • • •

c

• • • • • • •

Z

(Stop) : Stops playback.

d

(Play) MONO/STEREO : Starts

playback. Selects Mono/ Stereo.

M

(Pause/Step) : Pauses playback.

C/V

(Skip) : Goes to the

next or previous chapter / track /

le.

c/v

(Scan) : Searches

backward or forward.

• • • • • • • • •

d

• • • • • • •

SPEAKER LEVEL : Sets the sound

level of desired speaker.

SOUND EFFECT : Selects a sound

effect mode.

VOL -/+ (Volume) : Adjusts speaker

volume.

(Mute) : Mutes the sound.

X

REC : USB Direct Recording.

0-9 numerical buttons : Selects

numbered options in a menu.

h

REPEAT : Selects a play

mode. (Repeat/ Random)

CLEAR : Removes a number when

setting the password.

• • • • • • • • •

e

• • • • • • •

TV Control buttons : Controls the

TV. (LG TV only)

- You can control the sound

level, input source, and power

switching of LG TVs as well.

Hold

1

(TV) and press PR/CH

(

W/S

) button repeatedly until

the TV turns on or off.

OPTICAL : Changes input source to

optical directly.

?

: This button is not available.

MIC VOL -/+ (Microphone Volume)

: Adjusts microphone volume.

ECHO VOL -/+ (Volume) : Adjusts

echo volume.

VOCAL FADER : You can enjoy the

function as karaoke, by reducing

singer vocal of music in the various

source.

Remote control

Getting Started10

Getting Started

1

Front panel

a

Disc Tray

b

Display window

Shows the current status of the unit.

c

Microphone jacks 1/2

d

PORT. IN

Connects to a portable player with audio

outputs.

e

USB Port

Connects a USB device.

f

R

(Open/Close)

Opens or closes the disc tray.

g

T

(Play/Pause)

- Starts playback.

- Pauses playback temporarily, press again to exit

pause mode.

h

I

(Stop)

Stops playback.

i

F (Function)

Changes the input source or function.

j

-/+(Volume)

Adjusts speaker volume.

k

1/!

(Standby/On)

Switches the unit ON or OFF.

Getting Started 11

Getting Started

1

a

Power cord

b

Speaker connectors

Connects the speaker cables.

c

OPTICAL IN

Connects to optical audio equipment.

d

HDMI OUT TO TV

Connects to TV with HDMI inputs.

(Interface for digital audio and video)

e

VIDEO OUT

Connects to a TV with video inputs.

f

AUX (L/R) INPUT

Connects to an external source with 2 channel

audio outputs.

g

ANTENNA FM

FM- Connects the FM wired antenna.

Rear panel

2 Connecting

Connecting12

Connecting

2

Assembling the speaker

Before connecting the speakers, assemble the

speakers. Please check the items for assembling the

speakers.

Preparation

Pole

Base

Speaker

Screw

Speaker cables

1. Attach the pole to the base, then secure the

connection with a supplied screw.

2. Draw the speaker cord through the hole on the

base.

Make sure speaker cable unfolded or in straight

condition before insert it to the hole.

,

Note

Connecting 13

Connecting

2

3. Attach the speakers to the speaker stands by

rotating the screws.

Do not catch the speaker cord between speaker

and the pole.

,

Note

4. Connect the speaker wire to the terminal on the

speaker. Make sure the wire marked black goes in

to the terminal marked “-”(minus) and the other

wire goes in to the terminal marked “+”(plus).

Be careful that the speaker

does not fall down. Otherwise

it may result in the speaker

malfunction and cause

personal injury and/ or

property damage.

>

Caution

Connecting14

Connecting

2

Attaching the speakers

to the unit

1. Connect the wires to the unit.

Match each wire’s colored band to the same

colored connection terminal on the rear of the

unit.

To connect the cable to the unit, press each

plastic finger pad to open the connection

terminal. Insert the wire and release the finger

pad.

Connect the black stripe of each wire to the

terminals marked -(minus) and the other end to

the terminals marked + (plus).

Connect a woofer cord to the player. When

connecting a woofer cord to the player, insert

the connector until it clicks.

2. Connect the wires to the speakers.

Connect the other end of each wire to the correct

speaker according to the color coding:

Color Speaker Position

Grey Rear Rear right

Blue Rear Rear left

Green Center Center

Orange Subwoofer Any front position

Red Front Front right

White Front Front left

To connect the cable to the speakers, press each

plastic nger pad to open the connection terminals

on the base of each speaker. Insert the wire and

release the nger pad.

y

Be careful to make sure children do not put

their hands or any objects into the *speaker

duct.

*speaker duct : A hole for plentiful bass sound

on speaker cabinet (enclosure).

y

Place the center speaker at a safe distance

from the child’s reach. Otherwise it may result

in the speaker falling down and causing

personal injury and/or property damage.

y

The speakers contain magnet parts, so color

irregularity may occur on the TV screen or PC

monitor screen. Please use the speakers far

away from either TV screen or PC monitor.

y

Before using the subwoofer, remove the

protective vinyl.

>

Caution

Connecting 15

Connecting

2

Positioning the system

The following illustration shows an example of

positioning the system. Note that the illustrations

in these instructions differ from the actual unit for

explanation purposes.

For the best possible surround sound, all the speakers

other than the subwoofer should be placed at the

same distance from the listening position ( ).

Front left speaker (L) / Front right speaker (R) :

Place the front speakers to the sides of the

monitor or screen and as ush with the screen

surface as possible.

Center speaker: Place the center speaker above or

below the monitor or screen.

Surround left speaker (L) / Surround right

speaker (R) :

Place these speakers behind your listening

position, facing slightly inwards.

Subwoofer: The position of the subwoofer is not

so critical, because low bass sounds are not highly

directional. But it is better to place the subwoofer

near the front speakers. Turn it slightly toward the

center of the room to reduce the wall reections.

Unit

Connecting16

Connecting

2

How to Affix the Ferrite

Core

Ferrite core may not be provided depending on each

nation’s regulations.

Affix the Ferrite Core for HDMI

cable

You must afx a ferrite core in order to reduce or

eliminate electrical interference.

1. Pull the stopper [a] of the ferrite core to open.

2. Wind the HDMI cable around the ferrite core

once.

3. Close the ferrite core until it clicks.

Connections to Your TV

Make one of the following connections, depending on

the capabilities of your existing equipment.

y

Depending on your TV and other equipment

you wish to connect, there are various ways

you could connect the player. Use only one of

the connections described in this manual.

y

Please refer to the manuals of your TV, Stereo

System or other devices as necessary to

make the best connections.

,

Note

y

Make sure the unit is connected directly to

the TV. Tune the TV to the correct video input

channel.

y

Do not connect your player via your VCR.

The image could be distorted by the copy

protection system.

>

Caution

Connecting 17

Connecting

2

HDMI Out Connection

If you have a HDMI TV or monitor, you can connect it

to this unit using a HDMI cable (Type A, High Speed

HDMI™ Cable).

Connect the HDMI OUT jack on the unit to the HDMI

IN jack on a HDMI compatible TV or monitor.

Set the TV’s source to HDMI (refer to TV’s Owner’s

manual).

y

You can fully enjoy digital audio and video

signals together with this HDMI connection.

y

When you use HDMI connection, you can

change the resolution for the HDMI output.

(Refer to “Resolution Setting” on page 19.)

,

Tip

y

Changing the resolution when the connection

has already been established may result in

malfunctions. To solve the problem, turn off

the unit and then turn it on again.

y

When the HDMI connection with HDCP is

not veried, TV screen is changed to black or

green screen or the snow noise may occur

on the screen. In this case, check the HDMI

connection, or disconnect the HDMI cable.

>

Caution

y

If a connected HDMI device does not accept

the audio output of the unit, the HDMI

device’s audio sound may be distorted or may

not output.

y

When you connect a HDMI or DVI compatible

device make sure of the following:

- Try switching off the HDMI/DVI device and

this unit. Next, switch on the HDMI/DVI

device and leave it for around 30 seconds,

then switch on this unit.

- The connected device’s video input is set

correctly for this unit.

- The connected device is compatible with

720 x 480i (or 576i), 720 x 480p (or 576p),

1280 x 720p, 1920 x 1080i or 1920 x

1080p video input.

y

Not all HDCP-compatible HDMI or DVI devices

will work with this unit.

- The picture will not be displayed properly

with non-HDCP device.

- This unit does not playback and TV screen

is changed to black or green screen or the

snow noise may occur on the screen.

y

If there is noise or lines on the screen, please

check the HDMI cable and use a higher

version cable than High Speed HDMI™ Cable.

y

If you use Bluetooth or AUX-OPT Function of

the unit, the audio is not output to HDMI.

,

Note

Connecting18

Connecting

2

What is SIMPLINK?

Some functions of this unit are controlled by the

TV’s remote control when this unit and LG TV’s with

SIMPLINK are connected through HDMI connection.

Controllable functions by LG TV’s remote control;

Power on/off, volume up/down, mute, etc.

Refer to the TV owner’s manual for the details of

SIMPLINK function.

LG TV’s with SIMPLINK function has the logo as

shown above.

y

Depending on the disc type or playing status,

some SIMPLINK operation may differ from

your purpose or not work.

y

The function is automatically changed to

optical when you change the speaker setting

of simplink to external, no matter what kind

of the function you are using.

,

Note

Video Connection

Connect the VIDEO OUT jack on the unit to the video

in jack on the TV using a video cable.

You can hear the sound through the system’s

speakers.

Yellow

Connecting 19

Connecting

2

Resolution Setting

The unit provides several output resolutions for HDMI

OUT.

You can change the resolution using [Setup] menu.

1. Press

n

.

2. Use

A/D

to select the [Setup] and press

b

ENTER. The [Setup] menu appears.

3. Use

W/S

to select [Display] option then press

D

to move to the second level.

4. Use

W/S

to select the [Resolution] option then

press

D

to move to the third level.

5. Use

W/S

to select the desired resolution then

press

b

ENTER to confirm your selection.

If your TV does not accept the resolution you

have set on the player, you can set resolution to

480p (or 576p) as follows:

Press

Z

for more than 5 seconds.

,

Note

Video Output

Resolution

Displayed resolution in display window and outputted

resolution may different according to connection

type.

[HDMI OUT] : 1080p, 1080i, 720p and 480p (or

576p) and 480i (or 576i)

[VIDEO OUT] : 480i (or 576i)

Connecting20

Connecting

2

Optional Equipment

Connection

AUX (L/R) INPUT Connection

Connect an Output of auxiliary device to the AUX (L/

R) INPUT Connector.

Red

White

To the audio output jacks of

your component

(TV, VCR, etc.)

If your TV has only one output for audio (mono),

connect it to the left (white) audio jack on the

unit.

,

Note

PORT. IN (Portable Input)

Connection

Connect an output of portable device (MP3 or PMP

etc.) to the PORT. IN connector.

MP3 player, etc

...

Listening to music from your

portable player or external

device

The unit can be used to play the music from many

types of portable player or external devices.

1. Connect the portable player to the

PORT. IN (PORTABLE IN) connector of the unit.

Or

Connect the external device to the AUX (L/R)

INPUT connector of the unit.

2. Turn the power on by pressing

1/!

.

3. Select the PORTABLE or AUX function by

pressing

P

FUNCTION.

4. Turn on the portable player or external device and

start it playing.

Page is loading ...

LG LHD657M Owner's manual

LG LHD657M Owner's manual

Related papers

Other documents