Tripp Lite B062-002-PS2 User manual

Tripp Lite
Brand
Tripp Lite
Model
B062-002-PS2
Category
KVM switches
Type
User manual

This manual is also suitable for

Tripp Lite B062-002-PS2 provides a convenient way to access and control multiple computers from a single console. It features:

  • Console ports: Connect your keyboard, mouse, and monitor to the appropriate ports, allowing you to control multiple computers with just one set of peripherals.
  • Link LED: Indicates the established connection status.
  • Local LED: Shows that the local PC or KVM switch is being accessed.
  • Remote LED: Indicates remote access to the console.
  • Local/Remote Pushbutton: Switch between local PC or KVM switch and remote console access.
  • Hotkey Sequence: Alternatively, use the hotkey sequence (Num Lock + - + -) to access local PC or KVM switch.

Tripp Lite B062-002-PS2 provides a convenient way to access and control multiple computers from a single console. It features:

  • Console ports: Connect your keyboard, mouse, and monitor to the appropriate ports, allowing you to control multiple computers with just one set of peripherals.
  • Link LED: Indicates the established connection status.
  • Local LED: Shows that the local PC or KVM switch is being accessed.
  • Remote LED: Indicates remote access to the console.
  • Local/Remote Pushbutton: Switch between local PC or KVM switch and remote console access.
  • Hotkey Sequence: Alternatively, use the hotkey sequence (Num Lock + - + -) to access local PC or KVM switch.
B062-002-PS2 Console Module
B062-002-USB Console Module
This Quick Start Guide briefl y describes how
to install and operate the B062-002-PS2/
B062-002-USB Console Module with the
Matrix KVM Switch.
1
25
Package Contents
The B062-002-PS2/B062-002-USB
Front View
Hardware Installation
The complete package consists of:
• (1) B062-002-PS2 or B062-002-USB Console Module
• (1) Custom KVM Cable
• (1) AC Power Adapter
• (1) Quick Start Guide
If anything is missing or damaged, please contact your dealer
immediately.
1. Link LED – Indicates good connection
2. Local LED – Indicates local PC is being accessed
3. Remote LED – Indicates remote console is being accessed
4. Local/Remote Pushbutton
Note: Local PC or KVM Switch can also be accessed by
using the following Hotkey Sequence: NumLock + minus (-)
key + minus (-) key. Press and hold the NumLock key, hit
the minus (-) key twice, then release the NumLock key.
Before you begin, make sure that power to all the devices
you will be connecting to have been turned off. Follow the
4 steps listed below to properly install your Console Module:
1. Plug your keyboard, mouse and monitor into the
appropriate console ports of the B062-002-PS2/
B062-002-USB Console Module. Each port is labeled
with the appropriate icon to indicate itself.
2. Plug the RJ45 connector into its appropriate port on the
rear panel of the B062-002-PS2/B062-002-USB Console
Module. At the other end, plug the RJ45 connector into
one of the console ports on the rear panel of the
Matrix KVM switch.
3
The B062-002-PS2/B062-002-USB
Rear View
1. Power Jack
2. Local PC Connector
3. Cat5 Port to connect to KVM
4. Firmware recovery switch
5. Console port connectors
Console
• A VGA, SVGA or Multisync monitor capable of the highest
resolution that you will be using on any computer in
the installation.
• A PS/2 Style Keyboard and Mouse (B062-002-PS2) or a
USB Style Keyboard and Mouse (B062-002-USB)
Cables
• For optimal signal integrity and to simplify layout, a high
quality Console Module to Local PC cable (with custom
HD15 connector) is included with the Console Module.
• Use Tripp Lite N001-, N002- or N105-Series Cat5 cable to
connect to KVM switch.
4
System Requirements
6
Hardware Installation ctd….
3. For the Local PC connection, use the cable provided to
connect to the keyboard, mouse and monitor ports of your
local PC. At the other end, plug the HD15 connector into
the appropriate port of the B062-002-PS2/B062-002-USB.
4. Plug in the power adapter, then turn on the
connected computer.
B062-002-PS2
B062-002-PS2
B062-002-USB
B062-002-USB
B060-032
Regulatory Compliance Identifi cation Numbers
For the purpose of regulatory compliance certifi cations and identifi cation, your
Tripp Lite product has been assigned a unique series number. The series number
can be found on the product nameplate label, along with all required approval
markings and information. When requesting compliance information for this
product, always refer to the series number. The series number should not be
confused with the marking name or model number of the product.
Tripp Lite follows a policy of continuous improvement. Product specifi cations
are subject to change without notice. Made in China.
WARRANTY
REGISTRATION
Register online today for
a chance to win a FREE Tripp Lite
product! www.tripplite.com/warranty
200801150--quick start.indd 1200801150--quick start.indd 1 2/4/2008 2:27:07 PM2/4/2008 2:27:07 PM
  • Page 1 1

Tripp Lite B062-002-PS2 User manual

Tripp Lite
Brand
Tripp Lite
Model
B062-002-PS2
Category
KVM switches
Type
User manual
This manual is also suitable for

Tripp Lite B062-002-PS2 provides a convenient way to access and control multiple computers from a single console. It features:

  • Console ports: Connect your keyboard, mouse, and monitor to the appropriate ports, allowing you to control multiple computers with just one set of peripherals.
  • Link LED: Indicates the established connection status.
  • Local LED: Shows that the local PC or KVM switch is being accessed.
  • Remote LED: Indicates remote access to the console.
  • Local/Remote Pushbutton: Switch between local PC or KVM switch and remote console access.
  • Hotkey Sequence: Alternatively, use the hotkey sequence (Num Lock + - + -) to access local PC or KVM switch.
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents