Sony XM-D400P5 User guide

Sony
Brand
Sony
Model
XM-D400P5
Category
Audio equalizers
Type
User guide

Sony XM-D400P5 is a powerful mono amplifier delivering 200 watts RMS into 4 ohms and 400 watts RMS into 2 ohms. With its Class D technology, it efficiently amplifies audio signals with low distortion. The variable low-pass filter (50-300Hz) and 40Hz EQ boost allow you to customize the sound to your preference. Connect your audio source via RCA or speaker level inputs, and enjoy the enhanced audio experience in your car.

Sony XM-D400P5 is a powerful mono amplifier delivering 200 watts RMS into 4 ohms and 400 watts RMS into 2 ohms. With its Class D technology, it efficiently amplifies audio signals with low distortion. The variable low-pass filter (50-300Hz) and 40Hz EQ boost allow you to customize the sound to your preference. Connect your audio source via RCA or speaker level inputs, and enjoy the enhanced audio experience in your car.

Design and Specifications subject to change without notice.
2003 SONY MOBILE
PRODUCT GUIDE
Other Specifications
Audio Power Specifications
POWER OUTPUT AND TOTAL HARMONIC DISTORTION
200 watts minimum continuous average power into 4 ohms, 20 Hz to 300 Hz with no more than
0.2% total harmonic distortion per Car Audio Ad Hoc Committee Standards.
Circuit system Class D Technology
Pulse power supply
Inputs RCA pin jacks
High level input connector
Input level adjustment range 0.3  6.0 V (RCA pin jacks) 1.2  12.0 V (high level input)
Outputs Speaker terminals, Through out pin jacks
Suitable speaker impedance 2  8 W
Maximum outputs 400 W (at 4 W)
800 W (at 2 W)
Rated outputs (supply voltage at 14.4 V) 200 W (20 Hz - 300 Hz, 0.2% THD, at 4 W)
400 W (20 Hz - 300 Hz, 0.6% THD, at 2 W)
Frequency response 5 Hz  300 Hz (+0.5 dB, -3 dB)
Harmonic distortion 0.06% or less (at 100 Hz, 4 W)
Low-pass filter 50 - 300 Hz, 12 dB/oct
Low Boost 0 - 10 dB (40 Hz)
Power requirements 12 V DC car battery (negative ground)
Power supply voltage 10.5  16 V
Current drain at rated output: 62 A (at 2 W)
Remote input: 2 mA
Dimensions Approx. 295 × 57 × 290 mm (11 5/8 × 2 1/4 × 11 1/2) (w/h/d)
not incl. projecting parts and controls
Mass Approx. 2.8 kg (6 lb. 3 oz.) not incl. accessories
Supplied accessories Mounting screws (5)
High level input cord (1)
Protection cap (1)
XM-D400P5
1 Channel Mono Amplifier
 800W max power
 200W x 1 RMS into 4W 20Hz - 300Hz @0.2% THD
 400W x 1 RMS into 2W 20Hz - 300Hz @0.6% THD
 Class D
 Variable 50 - 300Hz 12dB/oct Low Pass Filter
 40Hz EQ Boost
 RCA and Speaker Level Inputs
2003 SONY MOBILE
PRODUCT GUIDE
XM-D400P5
1 Channel Mono Amplifier
Design and Specifications subject to change without notice.
Connections
Dimensions
Unit: mm (in.)
202 (8)
347 (13
3
4
)
311 (12
1
/
4
)
119
(4
3
/
4
)
327 (12
7
/
8
)
6 (
1
/
4
)
339 (13
3
/
8
)
57 (2
1
/
4
)
290 (11 )
1
/
2
264 (11 )
1
/
2
101 (4)
295 (11 )
5
/
8
172 (6 )
7
/
8
278 (11)
Subwoofer OUT
Through Output
2 - 30A fuses
Ground
12V Car Battery
Remote Output
Line Input
High Level Input Connection
  • Page 1 1
  • Page 2 2

Sony XM-D400P5 User guide

Sony
Brand
Sony
Model
XM-D400P5
Category
Audio equalizers
Type
User guide

Sony XM-D400P5 is a powerful mono amplifier delivering 200 watts RMS into 4 ohms and 400 watts RMS into 2 ohms. With its Class D technology, it efficiently amplifies audio signals with low distortion. The variable low-pass filter (50-300Hz) and 40Hz EQ boost allow you to customize the sound to your preference. Connect your audio source via RCA or speaker level inputs, and enjoy the enhanced audio experience in your car.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers