Infocus SP-WALLARM-01 Datasheet

Category
Projector mounts
Type
Datasheet
ISSUED: 09-02-08 SHEET NO: 056-9633-1
page 1 of 2
Visit the InFocus Web Site at www.infocus.com
TECHNICAL DATA SHEET -
MODEL: SP-WALLARM-01
Dimensions:
Weight:
10.4 lb (4.7 kg)
Shipping weight:
15.5 lb (7kg)
Maximum Load Capacity:
35 lb (15.9 kg)
Shipping Carton dimensions:
L = 47.25 in (1200 mm)
W = 18 in (457 mm)
H = 5 in (127 mm)
A R C H I T E C T S S P E C I F I C A T I O N S
Projector Wall Mount shall be an InFocus model SP-WALLARM-01 and shall be located where indicated on the plans. Assembly and
installation shall be done according to instructions provided by the manufacturer.
The SP-WALLARM-01 Universal Projector Wall Arm is designed for
the short throw projector. The projector is positioned from the wall
by sliding the telescoping arm. The end result is a projection throw
with a distance ranging from 28.75" - 50". The arm is compatible
with both the Peerless SP-CEIL-UNIV and ACC560 projector mount
line. Security fasteners are included.
Features:
Provides a projection throw distance of 28.75” - 50”
Compatible with both the SP-CEIL-UNIV and ACC560
Rated to 35 lbs max load
Wall plate can be inverted to position the arm closer to the ceiling
Cord management within the arm
Accessories:
WSP320 Metal Stud wall plate for 16” centers
ACCMIS550 Security Cable for Metal Stud Installation
ACC020 Projector Security Cable
Universal Projector Wall Arm
SP-CEIL-UNIV Sold Separately
ISSUED: 09-02-08 SHEET NO: 056-9633-1
page 2 of 2
Visit the InFocus Web Site at www.infocus.com
SIDE VIEW
FRONT VIEW
TECHNICAL DATA SHEET
MODEL: SP-WALLARM-01
SIDE VIEW WITH PROJECTOR
ALL DIMENSIONS =
INCH
(MM)
SP-CEIL-UNIV Sold Separately
3.89in
(99mm)
5in
(127mm)
3.50in
(89mm)
.34in
(9mm)
11in
(279mm)
40.11in
(1019mm)
5.89in
(150mm)
1.50in
(35mm)
MIN 28.75 in
MAX 50in
  • Page 1 1
  • Page 2 2

Infocus SP-WALLARM-01 Datasheet

Category
Projector mounts
Type
Datasheet

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI