ZALMAN ZM-Z7PLUS Datasheet

ZM-Z7PLUS
ZALMAN
Brand
ZALMAN
Model
ZM-Z7PLUS
Category
Computer cases
Type
Datasheet

This manual is also suitable for

ZALMAN ZM-Z7PLUS is a versatile ATX mid-tower case designed to accommodate standard ATX and m-ATX motherboards. It features a sleek black design with ample space for components, efficient cooling options, and convenient front I/O ports for easy access to essential connections. The case supports a variety of storage configurations with 4 external 5.25-inch bays, 5 internal 3.5-inch bays, and 1 external 3.5-inch bay.

ZALMAN ZM-Z7PLUS is a versatile ATX mid-tower case designed to accommodate standard ATX and m-ATX motherboards. It features a sleek black design with ample space for components, efficient cooling options, and convenient front I/O ports for easy access to essential connections. The case supports a variety of storage configurations with 4 external 5.25-inch bays, 5 internal 3.5-inch bays, and 1 external 3.5-inch bay.

English
1
1
English
Z7 Plus / Z7
1) Please read this manual thoroughly prior to installation.
2) Before installation, check the components and condition of the
product. If any problem is found, contact the retailer.
3) Avoid inserting objects or hands into the system while it is in operation
to prevent product damage and injuries.
4) Check the manual when connecting cables. Incorrect connections
may cause short circuits leading to fi
re hazards.
5) Do not block the Front Intake Vent or the Rear Exhaust Vent.
6) Keep this unit away from heat sources, direct sunlight, water, oil, and
humid environments, and place the unit on a flat, stable, vibration-free,
and well-ventilated area.
7) Do not clean the product surface with chemicals or wet cloth.
(chemicals: industrial brightener, wax, benzene, alcohol, paint thinner,
mosquito repell
ent, aromatics, lubricant, detergent etc.)
8) Please wear gloves while handling this product to prevent injuries.
9) Product design and specifications may be revised to improve quality
and performance.
The diagrams used in this manual’s installation guide are based on
the model Z7 Plus. Installation for the Z7 follows exactly the same
installation procedure.
Cautionary Notes
2
Z7 Plus / Z7
2
Product Details
(1) Specifications
Models Z7 Plus / Z7
Enclosure Type ATX Mid Tower
Dimensions
(W×H×D)
Z7 Plus
224 × 472 × 496㎜ (8.8 × 18.6 × 19.5”)
Z7
207 × 472 × 496㎜ (8.1 × 18.6 × 19.5”)
Weight
Z7 Plus
Main Unit: 7.7㎏(17lb) / with packaging: 8.7㎏(19lb)
Z7
Main Unit: 7.2㎏(16lb) / with packaging: 8.2㎏(18lb)
Materials Plastic, Steel
Color Black
Compatible Motherboards Standard ATX / m-ATX
Compatible PSUs Standard ATX / ATX12V
VGA Compatibility Full Size(300㎜)
Expansion
Slot 7
Drive Bay
External 5.25” 4
Internal 3.5“ 5
External 3.5” 1
Cooling
Component
Front
120㎜ LED Fan × 1 (standard)
(120㎜ / 140㎜ option)
Rear 120㎜ Fan × 1 (standard)
Side
Z7 Plus
120㎜ Fan × 1(standard), Fan Control Function,
80/92/120/140㎜ Fan×1(optional)
Z7
80/92/120/140㎜ Fan×2(optional)
Front I/O Port
Z7 Plus
Mic×1, Headphones×1, USB 2.0×2, e-SATA×1
Z7
Mic×1, Headphones×1, USB 2.0×2
3
English
Z7 Plus / Z7
(2) External Features
Front Top Side(left)
(3) Top I/O Ports
Mic
USB 2.0
Headphones
HDD LED
Power LED
※ The Z7 does not have an e-SATA port.
Reset
e-SATA
Power
Button
4
Z7 Plus / Z7
# Components Units
① Chassis 1
② Side Panel (Right) 1
③ Side Panel (Left) 1
④
Side Panel Fan
Controller
1
⑤ HDD Rack 1
# Components Units
⑥
3.5”/2.5” to 5.25”
Adaptor Tray
1
⑦ Front Cover 1
⑧ 5.25” Bay Covers 8
⑨ 3.5” to 5.25” Bay Cover 1
(4) Exploded View
①
②
③
④
⑤
⑥
⑦
⑧
⑨
※ The Z7 does not have a ④Side Panel Fan Controller.
5
English
Z7 Plus / Z7
(5) Parts
Cable Ties × 5
Stand-Off × 9
Main Unit
A Bolts × 17
(6-32*6)
[motherboard/PSU/PCI Slot Installation]
B Bolts × 20
(6-32*8)
[HDD Installation]
C Bolts × 6
(PWH M3*5)
[ODD, FDD, SSD Installation]
User’s Manual ×1
6
Z7 Plus / Z7
Installation
(1) Side Panel Removal
(2) PSU Installation
3
A Bolt
7
English
Z7 Plus / Z7
(3) Motherboard Installation
ATX Board
or
m-ATX Board
Please refer to the diagrams below to determine Stand Off installation points
before installing the motherboard.
Stand-Off
A Bolt
8
Z7 Plus / Z7
(4) Graphics Card Installation
(5) 5.25” and 3.5” Drive Installation
PULL
1) Front Cover Removal
Click
Tip
▶ The PCI Slot can also be secured with Bolts.
9
English
Z7 Plus / Z7
2) ODD Installation
HDD
② 3.5” HDD Installation
3) 3.5” Drive Installation
① HDD Rack Removal
B Bolt
10
Z7 Plus / Z7
B. For 3.5” HDD Installation
3.5” HDD
3.5” HDD
② Installation of Drive to Adaptor Tray
A. For 3.5” FDD Installation
3.5” FDD
3.5” FDD
C Bolt
A Bolt
4) Adaptor Tray Installation
① Adaptor Tray Removal
11
English
Z7 Plus / Z7
Please remove the Front Cover’s Bay Cover before installing to the case.
C. For 2.5” SSD Installation
SSD
SSD
C Bolt
5) Front Cover Installation
12
Z7 Plus / Z7
1) Power Button and LED Cable Connection
(6) Cable Connections
Power LED
Power
Motherboard
Motherboard
Power Button
HDD LED
or
2) Top I/O Panel Cable Connection
HD Audio
Top I/O Ports
Audio
USB 2.0
Reset
e-SATA
AC ’97
※ e-SATA is only supported by Model Z7 Plus.
13
English
Z7 Plus / Z7
(7)
Additional Fan Installation and Replacement (optional)
1) Side Panel Fan Installation (80/92/120/140㎜ Fans Compatible)
Tip
▶ For USB 2.0, e-SATA (Z7 Plus) and audio cables, please refer to the
motherboard’s manual.
▶ In the event that the Power LED/HDD LED connector’s polarities(+/-) are
reversed, the LED will not function properly.
The Z7 Plus comes equipped with one 120㎜ Fan. For additional fan
installation, remove the Fan Cover(left) and install the fan(right) as shown
below.
14
Z7 Plus / Z7
2) HDD Rack Fan Replacement
The Z7 Plus comes equipped with one 120㎜ Fan. 120 / 140㎜ Fans can
be installed to the HDD Rack. Please refer to the diagram below for fan
replacement.
The Z7 Plus comes equipped with a Fan Control on the left Side Panel. By
connecting the 4-Pin Power Connector and the 3-Pin Fan Connector to the Fan,
the Fan Speed can be controlled using the Fan Speed Controller.
Left Side
Panel (exterior) Left Side Panel (interior)
(8) Side Panel Fan Control [Z7 Plus]
Fan Speed
Controller
High Speed
Low Speed
3-Pin Fan
Connector
4-Pin Power
Connector
Activity LED
15
English
Z7 Plus / Z7
MEMO
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17

ZALMAN ZM-Z7PLUS Datasheet

ZM-Z7PLUS
ZALMAN
Brand
ZALMAN
Model
ZM-Z7PLUS
Category
Computer cases
Type
Datasheet
This manual is also suitable for

ZALMAN ZM-Z7PLUS is a versatile ATX mid-tower case designed to accommodate standard ATX and m-ATX motherboards. It features a sleek black design with ample space for components, efficient cooling options, and convenient front I/O ports for easy access to essential connections. The case supports a variety of storage configurations with 4 external 5.25-inch bays, 5 internal 3.5-inch bays, and 1 external 3.5-inch bay.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents