Options
Description Parts Number Remarks
Imprinter option
(fi-486PRFR)
PA03296-D207
Imprinter option
(fi-486PRRE)
PA03296-D201
The imprinter option enables users to print information
on original documents for document management
purposes. While the FI-486PRFR(Pre-imprinter) prints
information on the front of documents prior to
scanning, the FI-486PRRE (Post-imprinter) prints
information of the
back of the original documents after they have been
scanned.
Although both the FI-486PRFR and the FI-486PRRE
may be attached to the same scanner unit, both
imprinters cannot be used simultaneously.
Thin paper kit
(fi-486TRK)
PA03296-D780 The thin paper kit expands the range of documents
that the fi-4860C2 is capable of scanning. (From
31g/m
2
to 52 g/m
2
)
Consumables
Description Parts Number Remarks
Pick Roller PA03296-F711 Lifetime: Every 300,000 sheets or one year
These rollers feed documents into the scanner.
Lamp PA83950-0290 Lifetime: Every 1,000 hours
The fi-4860C2 uses two lamps.
Brake Roller CA04315-F705 Lifetime: Every 300,000 sheets or one year
These rollers separate documents as they are being
fed into the scanner.
Pad Assy CA04315-G730 Lifetime: Every 300,000 sheets or one year
These rubber parts separate documents.
Print Cartridge CA00050-0262 Lifetime: 4,000,000 printed characters
For use with fi-486PRFR and fi-486PRRE imprinters.
ScanAid Kit for fi-4860C2
Description Parts Number Remarks
ScanAid kit for
fi-4860C2
CG01000-498501 1 x Pad Assembly - CA04315-G730
2 x Pick Rollers - CA04315-F705
1 x Pick Roller Unit - PA03296-F711
1 x F1 Cleaner
1 x F2 Cleaner
1 x 20-Pack Cleaning Sheets
1 x 20-Pack Cleaning Cloth
1 x 100-Pack Cleaning Swabs
1 x Cleaning Instructions (OP Manual Extract)
/