Electrolux EWT1058 User manual

Brand: Electrolux

Model: EWT1058

Category: Washing machines

Type: User manual

INSTRUCTIONS MANUAL

EWT 1058

WASHING MACHINE

For the user

Warnings

Keep this instruction book with the appliance. If the appliance is sold or transferred to another owner, ensure

that the book is supplied with the appliance. The new user can then find out about the operation of the

appliance and the relevant warnings.

These warnings have been provided in the interest of safety.

Please read these notes carefully before installing and using your appliance. Thank you for your attention.

Use

• Upon delivery of the appliance, remove the packaging

immediately. Check its general appearance.

Note any comments in writing on the delivery note of

which you keep one copy.

• This appliance is designed to be used by adults.

Ensure children do not touch it and use it as a toy.

• It is dangerous to alter or try to alter the specifications

of this appliance.

• Your appliance is designed for normal domestic usage.

Do not use it for commercial or industrial purposes or

for other uses than the one for which it was designed.

• Always unplug the appliance and turn off the water

after use.

• Only wash items which are designed to be machine

washed. Follow the instructions on the care label in

each garment.

• Do not wash garments containing wire and frayed or

torn articles.

• Any objects such as coins, safety pins, nails, screws,

etc. should be removed before washing.

They can cause extensive damage if they are left in

the clothing.

• Garments on which stain removers containing petrol,

alcohol, trichloroethylene, etc have been used should

not be machine washed. If such stain removers are

used, allow the product to evaporate before placing the

garments in the drum.

• Wash small items such as socks, laces, etc, in a small

washing bag or pillow. This prevents these items

sliding between the drum and the tub.

• Only use the quantities of fabric softener recommended

by the manufacturer. Indelible marks on the fabric may

result if you overfill with softener.

• Always unplug the appliance before cleaning and repai-

ring it.

Safeties

• Lid: your appliance is fitted with a safety device

preventing the lid from being closed when the drum

doors are open. It is then impossible to start.

An electronic safety device prevents the lid from being

opened during the operating cycle. At the end of the

cycle, the lid can be opened immediately: the immediate

opening “Door” light is thus extinguished. When the

lid is locked and released, an audible “click/clack”

alarm is sounded to warn you of the start or end of the

cycle.

Note: In the event of a power failure, the lid can only

be opened after 2 minutes.

• Washing motor:

a thermal safety device protects the

motor against the risk of mechanical overload, excess

voltage or low voltage.

• Heating:

the heating system can only operate if the tub

is filled with the amount of water required for washing.

This safety device works essentially when the water is

cut off or if the water inlet tap is closed.

• Anti-foam system

: The electronic spin cycle with

intermediate spin after the main wash and the three

rinsing cycles for the whites and coloureds program-

mes ensures very low water consumption. After the

wash cycle, the spin cycle remains controlled by the

foam detection system. If necessary, the spin cycle is

interrupted until the foam is evacuated.

• Balance control system:

This safety device ensures

the appliance remains stable during intermediate or

final spins and detects if the load is unevenly distributed

in the drum (small load or tangled washing) which the

balance control system then remedies.

Disposal

Packaging

• All materials marked with the symbol are recy-

clable. Dispose of them in a tip designed for this purpose

(contact your local waste disposal office) so that they

can be recovered and recycled.

> PE <= polyethylene

> PS <= polystyrol

> PP <= polypropylene

Environment protection

To save water and energy and therefore to help to protect

the environment, we recommend that you follow these

instructions:

• If possible, load the appliance to full capacity rather

than with partial loads (ensuring that the drum is not

overloaded).

• Use the prewash function only for very dirty laundry.

• Adjust the amount of detergent to the hardness of the

water as well as to the load and soiling of the laundry.

Appliance

When disposing of your old appliance, make it unusable

as it may represent a danger: cut the electric cable and

make the door catch unusable.

Contents

For the user

Warnings 3

Description of the appliance 6

Control panel 7

Description of controls 7-10

Using the machine 11-12

Loading the laundry 11

Measuring the detergent 11

Additives 11

Selecting the desired programme 11

Selecting the spin speed or the "no spin"

option 11

Selecting the desired option 12

Selecting the delay start 12

Starting the programme 12

Modifying the programme in progress 12

Interruption a programme in progress 12

Opening the lid 12

Cancelling a programme 12

End of programme 12

Washing guide 13

Sorting the laundry into categories 13

Temperatures 13

Removing stains 13

Check the laundry 13

Maximum laundry loads depending on

fabric type 14

Detergents 14

International wash care symbols 15

Programme chart 16-17

Maintenance and cleaning 18

Descaling the appliance 18

After each wash cycle 18

External cleaning 18

Detergent dispenser 18

Drain filter 18

Troubleshooting 19

After-Sales Service 21

For the installation engineer

Warnings 22

Installation 22

Technical specifications 22

Installation 23

Removing the transit bolts 23

Location 23

Levelling 24

Moving the appliance 24

Water inlet 24

Draining 24

Electrical connection 25

How to read the instructions manual ?

The following symbols will assist you whilst reading this manual:

Safety instructions

Advice and recommendations

Information linked to the protection of the environment

Description of the appliance

Detergent dispenser

Symbols

1 - prewash (

)

2 - wash (

) (powder or liquid detergent)

3 - softener (

)

4 - softener overflow

Lid

Lid handle

Filter access flap

Programme

selector

Lever for placing

appliance on rollers

Options

Display window

Programme progress

Start / Pause button

Control panel

4321

1. Programme selector

It is used to select the most suitable programme to the

type and soiling of your laundry as well as the tempe-

rature of the washing.

This dial is divided into two sectors:

- wash programmes:

whites, coloureds, synthetics, delicates, wool and

handwash (

- additional programmes and stop function.

This programme selector can be turned to the left or to

the right.

At the end of the programme, the selector should be

on the stop position "On/Off".

Symbols on the programme selector:

- E = energy saving programme,

= cold,

= handwash programme.

Options buttons

The various options should be chosen after the

programme has been displayed and before pressing

the Start/Pause button.

The corresponding lights illuminate when these buttons

are pressed. When pressed again, the lights extinguish.

They flash for approximately 3 seconds and the word

"Err" appears on the display window to warn of a selec-

tion error.

2. Prewash button

The appliance performs a prewash at 30°C max.

The prewash ends with a short spin for the whites,

coloureds and synthetics programmes and drains the

water for delicates. It is not possible to select the

prewash option for the wool and handwash programmes.

This option is recommended for heavily soiled laundry.

3. Spin button

When selecting the programme, a maximum speed

(corresponding to the type of laundry) is displayed.

However, by pressing the Spin button, this speed can be

reduced or the "no spin" option "

" (drain) can be

selected depending on your drying options.

Spinning speeds depend on the type of laundry. The

following speeds can be selected:

• Whites / Coloureds:

500/700/900 and 1000 rpm.

• Synthetics / Wool / Handwash:

/500/700 and 900 rpm.

• Delicates:

/500 and 700 rpm.

5°

No spin

If you select the " " position, the appliance drains the

water only. This function cannot be selected with the

Whites and Coloureds programmes. This function is

very useful for very delicate laundry.

4. Water in the tub button

This button can be used with all wash and rinse pro-

grammes. The water from the final rinse is not drained

at the end of the selected programme to prevent creas-

ing the laundry if it is not removed immediately from the

drum. You can select this option at any point up to the

rinse cycles by selecting the Start/Pause button before-

hand. The Start/Pause light flashes and the remaining

time display window shows “

0”.

There are three different ways of draining the water:

• Select the Drain programme

The appliance drains the water without spinning. Before

selecting the Drain programme

, the programme se-

lector must be in the stop position "On/Off".

• Press the Start/Pause button

The appliance drains the water and spins the washing

depending on the type of laundry at maximum speed.

• Select the spin speed

Select the desired spin speed by pressing the Spin

button and then press the Start/Pause button.

Warning: if the water is not drained within 18 hours, the

water is automatically drained.

5. Quick button

By pressing this button, the washing time is reduced as

follows:

- 49 minutes for the 90°C whites programmes,

- 62 minutes for the 60°C coloureds programmes,

- 28 minutes for synthetics,

- 8 minutes for delicates.

This function cannot be used on the wool, handwash

programmes and is recommended for lightly soiled

clothes.

6. Extra rinse button

This button can be selected with all programmes except

with wool and handwash "

" programmes.

The appliance performs 4 rinses instead of 3.

7. Delay start button

This button is used to delay the start of a programme

from 1 to 24 hours.

Using delay start

• Select the programme.

• Select the required time for the delay start.

• Press the Start/Pause button.

The timer is displayed in hours.

The lid can be opened to load the washing during the

delay start period by pressing the Start/Pause button.

The programme starts when the time has elapsed.

Modifying the delay start

• Press the Start/Pause button.

• Press the Delay start button until the new number of

hours at the end of which you want the programme to

start appears in the display window; if you want to

cancel delay start, move the programme selector to

the stop position "On/Off".

• Press the Start/Pause button again so as to

activate the new delay start selection or to start

the programme (if the delay start has been

cancelled).

Be careful : if you use liquid detergent for a washing

cycle with a delay start, use a ball to put directly in the

drum and choose a programme without prewash.

If you want to realize a prewash with a delay start in the

same time, please use powder detergent.

8. Display window

This display window is used to view the following

information:

Programme cancellation - programme duration - de-

lay start - incorrect selection - error codes.

Programme cancellation

If you want to cancel a programme, turn the programme

selector dial to the stop position "On/Off". A new

programme can then be selected after cancelling the

previous one.

Programme duration

This is calculated as a func-

tion of the maximum load

specified for each textile

type. The readout of the

washing time appears in

hours and minutes in the

display window and reduces

minute by minute.

The programme duration can vary depending on the

temperature and the water inlet pressure as well as the

mains voltage of your appliance or else if foam during

rinses or imbalances during spinning are detected.

When the programme has finished, “

0” flashes in the

display window.

Delay start

You can activate the delay start using the Delay start

button (24 hours maximum). The number of hours at the

end of which you want the programme to start de-

creases hour by hour.

2.052.05

Incorrect selection

If you select a function which

is not compatible with the

chosen wash programme,

the time remaining window

displays “Err”.

Error codes

Any operating faults are

shown by an error code on

the display. The error code

provides assistance for us-

ers and for the After-Sales

Department (see pages 19

and 20).

9. Start/Pause button

This button has three

functions:

Start - Pause - Continuation

of the cycle after stopping

with the tub full or after

soaking.

Start

After having selected the wash programme, press this

button to start the appliance; the corresponding light

stops flashing.

If you have selected a delay start, the timer starts.

The time remaining window displays the duration of the

programme or the delay start time.

Err

Pause

The programme in progress is interrupted when this

button is pressed. It continues when this button is

pressed again. During the pause, the light of the Start/

Pause button flashes.

Drain

By pressing the Start/Pause button:

• The water from the soak programme is drained.

• The water from programmes with rinse hold is drained

(button selected) and the washing is spun.

10. Programmes procedure

When you select a programme, the lights corresponding

to the various phases within the programme illuminate.

When the programme starts, only the immediate opening

light "Door" and the phase in progress light remains

illuminated.

If one of the lights as follow and the "DSP" light flash at

the same time than an error code on the display window,

the following faults may have occurred:

• E10 + "Rinse" light:

==> the appliance is not filling.

• E20 + "Wash" light:

==> the appliance is not draining.

• E40 + "Prewash" light:

==> the lid is not closed properly.

See the “Troubleshooting” section on page 19 to remedy

the fault.

E40E40

1515

Information about the programme

Wool

With this programme, woollen garments which contain

the words “pure new wool, machine washable, does not

shrink” on the care label can be washed but also wool-

len garments which normally have to be handwashed

and all other garments which contain the “hand wash-

able” symbol on the care label.

Soak

The soak programme is a separate programme which

operates with the Start/Pause button after having se-

lected it.

It is recommended for washing heavily soiled laundry.

Pour the powder into the prewash compartment

The washing temperature is 30°C and the programme

ends with the tub full.

The water can be drained in two ways:

• Draining only

Press the Start/Pause button. The water is drained.

• Drain and spin

Turn the programme selector dial to the stop posi-

tion "On/Off", select the Spin programme (and the

spin speed if necessary) and press the Start/Pause

button.

Warning

• If the water is not drained within 18 hours, the

appliance is drained automatically.

• After draining, a wash programme can be selected.

Turn the programme selector dial to the stop posi-

tion "On/Off", select the programme and press the

Start/Pause button.

Rinse - Softener

This is a separate programme which is used to rinse

and spin handwashed garments.

Drain

The separate drain programme can be used for pro-

grammes which end with the tub full to drain the water

before the final rinse.

First, turn the programme selector dial to the stop

position "On/Off" then select the Drain programme.

Press the Start/Pause button.

Spin

This programme spins the washing at maximum speed.

A different spin speed can be selected depending on

the nature of the washing using the Spin button.

Prog. 30 - 30 min

A complete programme which can be combined with the

following functions:

Spin, no spin (drain), water in the tub and delay start.

This programme can be used for lightly soiled clothing or

to freshen it up.

Maximum load: 2,5 kg

Washing temperature: 30°C

Programme duration: 30 minutes

Spin speed: 700 rpm

On/Off

If you want to cancel a programme which has already

been selected, turn the programme selector dial to the

stop position "On/Off". Another programme can then be

selected.

THE DRUM SELF POSITIONING SYSTEM

This electronic system ensures the doors are in the

upper position when the wash programme finishes thus

aiding removal and loading of the washing. If the washing

remains unevenly distributed meaning that the drum is

not in the correct position, turn the drum the hand until

the doors are in the high position.

Using the machine

Before using your appliance for the first time, we

recommend you to perform a preliminary wash, without

laundry, to clean the drum and tub if necessary:

- Pour an amount of detergent into the “wash” compart-

ment.

- Select a 95°C cotton programme.

- Press the Start/Pause button : the wash cycle starts.

1. Loading the laundry

lift the lid of the machine,

open the drum by pressing on button A : the two flaps

are opened automatically,

load the laundry, close the drum and the lid of the

appliance.

Warning: before closing the lid of your appliance,

ensure that the drum door is properly closed:

the two flaps are locked,

the locking button A is out.

An electronic system allows the drum to be in the high

position when the cycle is finished. This system allows

for easier loading and unloading of the laundry. If an

unbalanced weight alters the functionning, turn the drum

by hand.

2. Measuring the detergent

Pour the amount of powdered detergent into the dispens-

ers

( ) and ( ) or a scale-remover into the dispenser

( ) if applicable.

If you are using a liquid detergent, refer to the “Choosing

a detergent” section in the washing guide.

3. Additives

If required, pour fabric softener into the softener dis-

penser

( ) without exceeding the maximum level.

4. Selecting the desired programme

Turn the programme selector to the chosen programme.

The lights corresponding to the phases included in the

programme illuminate.

If the programme selector is turned when the appliance

is performing a wash cycle, the code “Err” appears in the

display window and flashes for 4 seconds. The pro-

gramme will be carried out and will ignore the new

position of the selector. The timer for the current cycle

reappears in the display window.

The stop position "On/Off" of the programme selector is

used to cancel the programme and to restart the appli-

ance in the event of an error.

6. Selecting the spin speed or the

no spin option "

When selecting the programme, or in pause mode, the

light corresponding to the maximum spin speed

illuminates. You can adjust the spin speed which corres-

ponds to the type of laundry and the degree of dampness

required at the end of the wash depending on your drying

possibilities. You can also choose the no spin position

" immediately after the final rinse.

7. Selecting the desired option

Press the desired button or buttons; the corresponding

lights illuminate. When one of these options is not

compatible with the selected programme, the corre-

sponding light flashes for 4 seconds and the word “Err”

appears in the display window.

8. Selecting delay start

Before starting the programme, if you want to delay it,

press this button until the desired delay start is dis-

played; this appears in the display window (24 hours

maximum).

9. Starting the programme

Press the Start/Pause button: the corresponding light

stops flashing and only the lights of the phase currently

being performed and the light of the Start/Pause button

remain illuminated.

If a delay start has been selected, the appliance starts

the timer.

The time remaining window displays the duration of the

programme or the delay start.

10. Modifying the programme in

progress

Before any modifications, the appliance must be switched

to PAUSE by pressing the Start/Pause button. If you

want to change the programme, the current one must be

cancelled first by turning the programme selector to the

stop position "On/Off". Then select the new programme

and press the Start/Pause button again.

11. Interrupting a programme in

progress

Press the Start/Pause button: the corresponding light

flashes during the pause period. Press this same button

again to continue the programme.

12. Opening the lid

- Opening the lid during the cycle:

The lid can be opened (after pressing the start/pause

button) throughout all wash phases when the tempera-

ture of the washing water is below 40°C; the immediate

opening light "Door" is then illuminated.

- Opening the lid at the end of the cycle:

The immediate opening of the lid is signalled by a double

“click” of the locking device. The immediate opening

light "Door" is extinguished and only the drum in upper

position light "DSP" remains illuminated.

13. Cancelling a programme

Turn the programme selector dial to the stop position

"On/Off".

14. End of programme

The appliance stops automatically.

If the "Water in the tub" option has been selected, the

light of the Start/Pause button flashes indicating that the

water must be drained before opening the lid (see page

8: "Water in the tub" button).

Turn the programme selector dial to the stop position

"On/Off".

Remove the laundry.

Unplug the appliance and switch off the water inlet tap.

Check that the drum is empty: any garments left in the

machine may be damaged during the next wash (shrink-

age) or their colour may run onto other garments.

Note:

We recommend that the lid and drum are left open after

use to air the tub.

Washing guide

Sorting the laundry into categories:

To obtain the best washing results, we recommend that

you sort your laundry into categories:

- on the one hand, resistant laundry which can withstand

powerful washing and spinning;

- on the other hand, delicate laundry which should be

washed with care.

For mixed loads or loads consisting of garments made

from fibres of different types, select a programme and

temperature suited to the most delicate fibre.

Temperatures

High temperature : 90°C

Ideal for cotton, linen and hemp garments such as tea

towels, towels, sheets, pillow cases, etc. The generally

white fibres may be heavily soiled.

Average temperature : 60°C

Recommended for whites which are not heavily soiled

and for fast coloureds, for synthetics and mixed cotton.

All these garments contain a care label stating that they

can be washed at a maximum temperature of 60°C.

Low temperature : 30-40°C

Ideal for delicate synthetics, silk, acrylic and woollen

garments containing the care label “pure new wool - does

not shrink - (

)". All other woollen garments must in

general be dry cleaned or handwashed.

Washing coloureds

When washed for the first time, coloureds may loose

their colour which may run onto other garments.

To ensure that the colour does not run, we recommend

that you perform the following simple test:

Removing stains

Remove certain stains which may not come out, espe-

cially if they are old, by working from the outside of the

stain towards the inside to avoid making rings.

Grass. Wash carefully, treat with diluted bleach. For

woollen garments, methylated spirits may achieve good

results.

Felt tip pen. Dab with a clean cloth soaked in methyl-

ated spirits. Take care not to spread the stain.

Rust. Use an anti-rust product, following the manufac-

turer’s recommendations carefully.

Scorch marks. If the fabric is only slightly scorched and

provided that the colours are fast, soak in water with a

little bleach, otherwise soak the fabric in a solution of 10

parts water to 1 part hydrogen peroxide and leave for 10

- 15 minutes.

Chewing gum. Dilute it with nail varnish remover then

remove it with a clean cloth. Ensure that the fabric can

withstand the nail varnish remover.

Tar. Spread a bit of butter onto the stain, leave then

sponge off with turps.

Lip stick. Place the stained side of the fabric on kitchen

paper then dampen the reverse of the fabric with nail

varnish remover taking care to change the paper under-

neath the stain frequently. Ensure that the fabric can

withstand the nail varnish remover.

Paint. Do not allow paint marks to dry. Treat immedi-

ately with the solvent specified on the paint tin (water,

turps, white spirit). Wash then rinse.

Wax. Scratch off the wax with a blunt blade to remove

as much as possible, then iron it placing a sheet of silk

paper between the iron and the stained fabric.

Check the laundry

Empty all pockets.

Close zips and poppers.

Remove curtain hooks or place the curtains in a laundry

bag.

Remove loose buttons, pins and clips.

To protect them, place curtains in a pillow case for

example.

Fasten or remove loose buttons.

Select a non visible

part of the garment

Dampen with

warm water

If the colour runs

handwash the

garment

Then press it between a

white piece of cotton

If the colour does not

run, you can machine

wash it

Maximum laundry loads depend-

ing on fabric type

The amount of laundry placed in the drum must not

exceed the maximum capacity of the appliance. This

capacity varies depending on the nature of the fabrics.

Reduce the quantity for heavily soiled laundry or for

sponge type fabrics.

Maximum load

Not all textiles have the same volume and the same

water retention ability.

This is why, the drum should in general be filled:

- fully but without excessive pressure for cotton, linen

and mixed fabrics,

- half full for treated cottons and synthetic fabrics,

- approximately a third full for very delicate garments

such as net curtains and woollen items.

For a mixed laundry load, fill the drum depending on the

nature of the most delicate fabrics.

The average weights of the most common items are

listed below as a guide:

bath robe .......................................................... 1200 g

hand towel ......................................................... 180 g

large towel ........................................................ 1300 g

single sheet ........................................................ 800 g

pillow case ..........................................................200 g

night shirt ............................................................ 180 g

man's pyjamas.................................................... 500 g

child's pyjamas ................................................... 200 g

man's shirt ..........................................................250 g

blouse ................................................................. 150 g

tea towel .............................................................100 g

overalls ..................................................... 300 à 600 g

Detergent

Choosing the detergent

Detergent manufacturers state on the label the maxi-

mum amount of detergent to be used depending on the

laundry load.

Amount :

The amount of detergent to use depends on the amount

of laundry to be washed, water hardness and the degree

of soiling of the laundry.

Use slightly less detergent in soft water areas. For hard

water areas or heavily soiled or stained laundry, use

lightly more detergent.

You can find out about how hard the water is in your area

by contacting your local water board or other profes-

sional department.

Note : Only use low foaming detergents, specially

designed for use in wahing machines. Use neutral

products for washing wool.

If you use liquid detergents, place the dosing ball

directly into the drum. If the laundry is then to be dried

in a tumble dryer, remember to remove the dosing ball.

Liquid detergent can also be poured directly into the

dispensing drawer (

), provided that the appliance is

switched on immediately.

Liquid detergents are designed for lower temperatures,

being 30°C and 40°C, whilst a powder detergent should

be used for higher temperatures from 60°C to 90°C.

Washing

95°C

NORMAL

WASH

BLEACHING

International wash care symbols

DELICATE

WASH

Washing

60°C

Washing

40°C

Washing

30°C

Delicat

hand

washing

Do not

wash

Chlorine bleach may be used

(cold wash only and with a diluted

solution.)

Do not use chorine black

IRONING

High temperature

max2000.

Medium temperature

max. 150°C

Low temperature

max 110°C

Do not iron

DRY

CLEANING

Dry cleaning

(all normal

solvents)

Dry cleaning (all

solvents except

trichloroethylene)

Dry cleaning

(petroleum and R113

solvents only)

Do not

dry clean

DRYING

Dry garment

flat

Do not tumble

dry

Dry garmen

hanging

Dry on clothes

hanger

May be tumble

dried

High heat

setting

Low heat

setting

Position of

programme

selector

Wash programme Possible

options

Max.

load

Indicative consumptions (*)

Water

liters

Power

kWh

Time

min.

Whites

Whites, e.g. normally

soiled work clothes,

bed linen, table linen,

clothes, towels

Prewash

Quick

Water in the tub

Extra rinse

5,0 kg 64 2,00

Whites

60 E

Energy saving

programme for

whites

Prewash

Water in the tub

Extra rinse

5,0 kg 64 1,50

Coloureds ( )

ECO white, e.g.

lightly soiled sheets,

lightly soiled table

linen, etc. Cotton or

linen colours clothes,

sponge fabric

Prewash

Short

Water in the tub

Extra rinse

5,0 kg 49 0,95

Synthetics

Synthetics, clothes,

coloureds, non-iron

shirts, blouses

Prewash

Short

Water in the tub

Extra rinse

2,5 kg 57 0,90

Delicates

For delicate fabrics

e.g. curtains

Prewash

Short

Water in the tub

2,5 kg 53 0,50

Wool

Machine washable

wool

Water in the tub 1,0 kg 50 0,40

Handwash

Very delicate laundry

bearing the

"handwash" symbol

Water in the tub 1,0 kg 50 0,30

Programme chart

WASH PROGRAMMES

( ) Programme recommended for comparisons based on CEI standard 456: 60°C cotton programme.

SEE THE DISPLAY WINDOW

* The data is given purely as an indication: the consumption values may vary in relation to the quantity

and the type of laundry, the temperature of the water supply and the ambient temperature. The data

refers to the highest temperature provided for each programme.

Programmes chart

SPECIAL PROGRAMMES

* The data is given purely as an indication: the consumption values may vary in relation to the quantity

and the type of laundry, the temperature of the water supply and the ambient temperature. The data

refers to the highest temperature provided for each programme.

** "Water in the tub" button not selected: rinsing for cotton programmes, bleaching possible.

"Water in the tub" button selected: rinsing for synthetics and delicates programmes.

Position of the

programme

selector

Programme

description

Wash programme Possible

options

Max.

load

Indicative consumptions (*)

Water

liters

Power

kWh

Time

min.

Soak

For very dirty

laundry except

wool

Presoak at 30°C.

Rinse hold.

To drain, press

Start/pause button.

After 18 hours, the

machine drains

automatically.

5,0 kg 24 0,30

Rinse

Handwashed

laundry can be

rinsed with this

programme

3 rinses with liquid

softener.

Spin.

Water in the tub 5,0 kg

2,5 kg

40 0,15

Softener

Handwashed

laundry can be

rinsed with this

programme

1 rinse with liquid

softener.

Spin.

Water in the tub 5,0 kg

2,5 kg

20 0,05

Drain

Water from final

rinse drained for

wash

programmes

which stop with

rinse hold

Water drained

(see page 8)

5,0 kg

2,5 kg

- 0,01

Spin

Separate spin

for all garments

Spin 5,0 kg

2,5 kg

- 0,03

Prog. 30 - 30 min

For lightly soiled

garments,

except wool

Washing at 30°C

2 rinses

Short spin at 700 rpm

Water in the tub 2,5 kg 47 0,20

On/Off

Stop, cancel Current programme

cancelled

- - -

SEE THE DISPLAY WINDOW

Disconnect the appliance before cleaning.

Descaling the appliance

It is not generally necessary to descale the appliance if

the correct amount of detergent is used.

However, if scale builds up, use a specific non corrosive

product specially designed for washing machines avail-

able in the shops.

Use the correct amount of descaler and the correct

descaling frequency specified on the packaging.

After each wash cycle

We recommend that the lid and drum are left open after

use to air the drum and prevent mould and stagnant

smells forming.

External cleaning

Clean the exterior cabinet of the appliance with warm

water and mild detergent. Rinse and dry thoroughly.

Important: never use alcohol, solvents or similar prod-

ucts.

Detergent dispenser

Removal :

Press the clips located on either side of the dispensing

drawer and pull it upwards.

You can then clean it with running water and a brush or

cloth.

Check that the siphons located at the rear of the

dispensing drawer are not blocked.

Maintenance and cleaning

Refitting :

Reposition the detergent dispenser in the slots until it is

clipped in.

Drain filter

Regularly clean the filter located at the bottom of the

appliance ("Filter" light illuminates when this filter is

blocked). If you frequently wash laundry which sheds

fluff, clean the filter after each wash. Lower the drain

hose over a large bowl placed on the floor to drain any

water remaining in the machine then:

to drain the residual water:

a. Open the flap

b. Place a shallow straight edged bowl underneath.

To finish draining, turn the drain filter plug so that it is

vertical and can release the residual water.

to clean the filter:

a. Turn the filter in an anti-clockwise direction and

remove.

b. Clean it thoroughly under running water.

c. Replace the filter and screw it in a clockwise

direction.

d. Close the flap.

Troubleshooting

Symptoms

The machine does not start.

The machine does not fill.

The machine empties as it fills.

The machine does not spin and/

or does not drain.

The machine leaks or overflows.

The washing results are not

satisfactory.

Solutions

Check that:

- the fuses are in good condition,

- the appliance is correctly connected,

- the lid of the appliance and the drum flaps are

correctly closed (error code E40),

- the “Start/Pause” button has been pressed,

- there is not a power failure,

- the water tap is fully open,

- the water inlet filter is not blocked.

Check that:

- the water inlet tap is open and that there is sufficient

pressure,

- there is not a water cut.

Check that:

- the end of the drain hose is not too low.

Check that:

- the drain hose is not blocked or kinked (error code

E20),

- the drain pump filter is not blocked ("Filter" light

illuminated),

- the laundry load is correctly balanced in the drum,

- the Drain programme or the "Water in the tub" option

have not been selected.

Check that:

- there is not too much detergent,

- the detergent is suitable for machine washing

(formation of excess foam),

- the end of the drain hose is correctly secured,

- the drain filter is correctly replaced after cleaning,

- the water inlet hose is not leaking.

Check that:

- the detergent is suitable for machine washing,

- the machine is not overloaded,

- the wash programme is suitable.

The manufacturing process of your appliance has been subject to many checks. However, if you notice an operating

fault, refer to the table below before calling the after-sales service. Whilst the appliance is operating, the following error

codes may appear in the display window (and the cycle progress lights may flash, see page 12).

E10 + "Rinse" and "DSP" lights: filling problem.

E20 + "Wash" and "DSP" lights

: draining problem.

E40 + "Prewash" and "DSP" lights: lid open.

Err : Incorrect selection.

After having removed the possible causes of the fault, press the Start/Pause button to restart the interrupted cycle.

If the error code reappears or if the fault has not disappeared, contact the after-sales service of your retail outlet.

Symptoms

The machine vibrates or is very

noisy.

The lid does not open.

The wash cycle is much too long.

The machine stops during a wash

cycle.

The laundry is not spun

sufficiently or water remains in

the drum (error code E20).

Softener flows out of the overflow

hole.

Solutions

Check that:

- the transit bolts have been removed (see "removing

transit bolts" section),

- the appliance is level and installed correctly,

- the appliance is not too close to a wall or other

furniture,

- the laundry is correctly distributed in the drum,

- the appliance is not overloaded.

- the appliance is in the heating phase,

- the lid is still locked.

Check that:

- the water pressure is sufficient,

- the water inlet filter is not blocked,

- there is not a water cut

Check that:

- the water pressure is sufficient,

- the water inlet filter is not blocked,

- the fuses are in good condition and have not blown,

- the appliance is not finishing its wash programme

by a rinse hold.

Check that:

- the drain hose is not kinked,

- the height of the end of the drain hose is not higher

than on metre,

- the drain pump filter is not blocked ("Filter" light

illuminated),

Check that:

- you have used the correct amount,

- the siphons on the rear of the detergent dispenser

are not blocked.

Page is loading ...

Electrolux EWT1058 User manual

Brand: Electrolux

Model: EWT1058

Category: Washing machines

Type: User manual

Download PDF

report

Electrolux EWT1058 User manual

Electrolux EWT1058 User manual

Related papers

Other documents