Bush Hog 2710L User manual

Category
Lawnmowers
Type
User manual

This manual is also suitable for

Bush Hog Brush Cutter 2710L is a heavy-duty rotary cutter designed for cutting grass and brush in uneven terrain. With a 10 1/2 ft cutting width and a 3 1/2 inch cutting capacity, it is ideal for large-scale mowing and vegetation management tasks. The 2710L features a self-leveling Perma-Level® hitch that maintains a consistent cutting height on uneven ground, and a hydraulic height adjustment system for easy and precise height adjustments.

Bush Hog Brush Cutter 2710L is a heavy-duty rotary cutter designed for cutting grass and brush in uneven terrain. With a 10 1/2 ft cutting width and a 3 1/2 inch cutting capacity, it is ideal for large-scale mowing and vegetation management tasks. The 2710L features a self-leveling Perma-Level® hitch that maintains a consistent cutting height on uneven ground, and a hydraulic height adjustment system for easy and precise height adjustments.





NEW Bush Hog
®
TOUGH
2710L Flex Wing Roadside Cutter
Bush Hog
®
TOUGH


NEW
*
*
Featuring
Unit Is Available
In Right Or
Left Hand Version





















 on each axle arm are located at
the end of the axle arm where shock loads occur.

handle punishing conditions for years.
All pivot points include easy to access grease
ttings. Axle arms are equipped with strong
1 1/2 inch diameter.

mean easy adjustments now and in the future.
Ruggedly constructed, the turnbuckles are easy
to reach and easy to grease.
 are built to
last in your demanding world. They are an integral
part of the cutter construction and spread loads
front to rear.
 are continuously welded.
Formed of 1/4 inch thick steel, they are deep enough
to handle large volumes of material.

are designed for the constant use of contract and roadside mowing.

are built to offer protection for years.
 resists rust through
years of rugged work.





Available in right or left hand models.










Right wing model
96 inch transport width at wing skid
Self-leveling Perma-Level® hitch
2 to 14 inch cutting height
87 degree up to 22 degree down wing flex
Hydraulic height adjustment
EZ lube driveline
Transport safety lock
Optional constant velocity driveline for
turns to 80 degrees
5-Year gearbox limited warranty
8 Bush Hog TOUGH Features


Right or left wing models
96 inch transport width at wing skid
Self-leveling Perma-Level® hitch
2 to 14 inch cutting height
87 degree up to 22 degree down wing flex
Hydraulic height adjustment
EZ Lube driveline
Transport safety lock
Optional constant velocity driveline for
turns to 80 degrees
6-year gearbox limited warranty
8 Bush Hog TOUGH Features
BUSH HOG EXCLUSIVE: versatility of
weight box that fits either side of
center section.
FOR HEAVY GRASS
AND BRUSH, UNEVEN
TERRAIN
Right wing model
96 inch transport width at wing skid
Self-leveling Perma-Level® hitch
2 to 14 inch cutting height
87 degree up to 22 degree down
wing flex
Hydraulic height adjustment
EZ Lube driveline
Transport safety lock
Optional constant velocity driveline
for turns to 80 degrees
Heavy-duty wing drives
5-year gearbox limited warranty
8 Bush Hog TOUGH Features






10 1/2 ft cutting width
2 1/2 inch cutting capacity
For minimum 60 HP tractors



10 1/2 ft cutting width
3 1/2 inch cutting capacity
For minimum 60 HP tractors
2610L

10 1/2 ft cutting width
3 1/2 inch cutting capacity
For minimum 80 HP tractors

NEW!
Dealer Info:



  
 10 ft 6 inches 10 ft 2 inches 10 ft 6 inches
 2 to 14 inches 2 to 14 inches 2 to 14 inches
 2.5 inch diameter 3.5 inch diameter 3.5 inch diameter
 11 ft 8 inches x 15 ft 2 inches 11 ft 4 inches x 14 ft 10 inches 11 ft 8 inches x 14 ft 10 inches
 (From Weight Box To Wing Skid) 8 ft 8 ft 8 ft
 540 or 1000 RPM 540 or 1000 RPM 540 or 1000 RPM
 60 PTO 60 PTO 80 PTO
 10 gauge 11 gauge/10 bottom 7 gauge

1/4
x 10
1/2
inches
1/4
x 12
1/2
inches
1/4
x 10
1/2
inches
 235/Transfer, 190/Center & Wing 235/Transfer, 205/Center & Wing 235/Transfer, 190/Center & Wing
 ASAE Cat. 5 (540 RPM input) ASAE Cat. 5 (540 RPM Input) ASAE Cat. 5 (540 RPM input)
ASAE Cat. 4 or 5 (1000 RPM input) ASAE Cat. 4 or 5 (1000 RPM Input) ASAE Cat. 4 or 5 (1000 RPM input)
 ASAE Cat. 4 ASAE Cat. 4 ASAE Cat. 5
 2 Friction Plates 2 Friction Plates 4 Friction Plates
 1
6,289 FPM/540 RPM 16,000 FPM/540 RPM 16,289 FPM/540 RPM
16,000 FPM/1000 RPM 15,912 FPM/1000 RPM 16,000 FPM/1000 RPM

1/2
x 4 inches Uplift with 6-inch Overlap
 Self Leveling Pull Type with Perma Level Hitch®, 2 inch Ball Hitch or Swivel Clevis Hitch (2
5/16
inch Ball Hitch on 3710)
 87° Up to 22° Down 87° Up to 22° Down 87° Up to 22° Down
 Laminated, Pneumatic or Aircraft
 Greaseable Pivot Points Greaseable With Bushings Greaseable With Bushings
 Independent Springs/Each Axle
 Standard Front Belting and Rear Band, Optional Chains Front and Rear
 Tandem Walking Axle, Chain Shielding, Deck Rings
 Standard
 1-year limited warranty with a 5-year gearbox limited warranty (2610L and 3710) 1-year limited warranty with a 6-year gearbox limited warranty (2710L)

 Driveline safety retaining rings
• Perma Level Hitch • Cylinder style anti wrap device around lower gearbox housing
• High blade tip speeds Deep sidebands Heavy duty wheel hubs • Quick detach gearbox shields




© October 2007 Bush Hog, LLC
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

Bush Hog 2710L User manual

Category
Lawnmowers
Type
User manual
This manual is also suitable for

Bush Hog Brush Cutter 2710L is a heavy-duty rotary cutter designed for cutting grass and brush in uneven terrain. With a 10 1/2 ft cutting width and a 3 1/2 inch cutting capacity, it is ideal for large-scale mowing and vegetation management tasks. The 2710L features a self-leveling Perma-Level® hitch that maintains a consistent cutting height on uneven ground, and a hydraulic height adjustment system for easy and precise height adjustments.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI