Panasonic TX14B4T Operating instructions

Panasonic
Brand
Panasonic
Model
TX14B4T
Category
LCD TVs
Type
Operating instructions
10
Setup menu
This menu gives access to various advanced features and the Tuning menu.
Press the F button.
Select Setup menu.
Setup Menu
4:3
Normal
Move to your choice.
Set options or access Tuning
Menu.
Press the N button to exit.
Tuning Menu
The Tuning Menu provides access to
many other features including Auto
Setup and Swap. See page 11.
Access Setup menu.
Aspect
Aspect allows you to view widescreen
programme material with the correct
aspect ratio (16:9).
When viewing with the TV in 16:9
aspect mode, you may observe a
horizontal line above the picture. This is
not a malfunction. The TV uses the line
for technical purposes.
Contrast
Brightness
Colour
Sharpness
Tint (NTSC only)
Setup Menu
Main Menu
Access
Colour Balance
Tuning Menu
Aspect
Select
Access
Exit
Select
Adjust
Exit
Return
Colour Balance
Colour Balance allows you to set the
overall colour tone of the picture.
Volume
Correction
The line Volume Correction will appear
asamenulineonlyintheAVmode.It
allows you to adjust the volume level of
individual AV sources.
11
Tuning menu
This menu provides access to Auto Setup, Manual Tuning and various other features.
Press the N button to exit.
Manual Tuning
Swap
Owner ID
Auto Setup
Tuning Menu
Off
Access
1
CH44
Child Lock
Set or access options.
Auto Setup
Manual Tuning
Swap
Child Lock
The Auto Setup menu allows you to
automatically retune the TV. See page
12.
Allows manual tuning of individual
channels. See page 13.
Shipping Condition
Press the F button.
Select Setup menu.
Select Tuning menu.
Access Setup menu.
Access Tuning menu.
Move to your choice.
Allows you to swap programme
positions. See page 16.
Locks the programme position to
prevent access.
Contrast
Brightness
Colour
Sharpness
Tint (NTSC only)
Setup Menu
Main Menu
Access
Setup Menu
4:3
Normal
Access
Colour Balance
Tuning Menu
Aspect
Shipping
Condition
Owner ID
Allows you to clear all tuning
information and reset all control levels
back to factory settings. See page14.
Allows you to enter a security code and
address information. See page 15.
Select
Access
Exit
Select
Access
Exit
Return
Select
Access
Return
Exit
Store
12
Tuning --- Auto Setup
Auto Setup will allow you to automatically tune your TV to your local stations. It is useful if you move to a
different region.
All current tuning
data will be erased
WARNING
F:Return
N : Exit
Stored CH58 BBC1
AUTO SETUP IN PROGRESS
21
68
Select Auto Setup.
Access Auto Setup.
Press the TV/AV button to start Auto
Setup.
The television will search for, locate and
sort into order your local stations.
As soon as this operation is completed
programme position 1 will be displayed
on the screen.
1
CH44
Press the F button.
Select Setup menu.
Select Tuning menu.
Access Setup menu.
Access Tuning menu.
Press the F button to return to the Tuning
Menu and the N button to exit. TV
stations will be located, sorted into order
and stored ready for use according to
the table below.
Manual Tuning
Swap
Owner ID
Auto Setup
Tuning menu
Off
Access
Child Lock
Shipping Condition
Select
Access
Return
Exit
Store
Return
Exit
Start Auto Setup
13
Tuning --- Manual Tuning
The programme positions may be tuned manually either via the on screen menu or via the buttons on
the TV front panel.
Press the F button.
Select Setup menu.
Select Tuning menu.
Select Manual tuning.
Select the programme position to be
tuned.
Start tuning.
When the required programme is found
save it by pressing either the TV/AV or STR
(on the front panel) button.
Press the N button to exit.
Manual tuning (front panel)
Access Setup menu.
Access Tuning menu.
Access Manual tuning.
STR
Press the F button until Manual tuning is
displayed.
Press the --- or + button to access
Manual tuning.
Press the TV/AV button to move between
Programme or Search.
By pressing buttons ! or " change the
programme position or start the search.
When the required station is found press
button STR to save the changes.
Repeat the above procedure to tune in
additional programmes, or finish the tuning
by pressing the F button.
F
1
CH44
21
68
--- +
Notes:
If you know the channel numbers of your
broadcasting stations you may use direct channel
selection by using button C on the remote control
unit to save the channels quickly:
--- enter Manual Tuning menu;
--- set the programme number;
--- press the C button;
--- set the channel number with the numeric
buttons;
--- save with the TV/AV button;
--- leave the menu by pressing N button.
If you want to use direct channel selection in the
Hyperband (cable TV), push the direct channel
selection button and programme position button
(C and +/---) one after the other and set the
number with the numbered buttons. CH--- --- will
first appear in the left top corner of the screen, and
t h e n H : --- --- . Fo r s a v i n g s e e a b o v e .
1
CH44
Swap
Owner ID
Auto Setup
Tuning Menu
Off
Access
Child Lock
Shipping Condition
Manual Tuning
Select
Access
Return
Exit
Store
Programme
Search
Return
Exit
Store
Manual Tuning
STR
!
"
F
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Panasonic TX14B4T Operating instructions

Panasonic
Brand
Panasonic
Model
TX14B4T
Category
LCD TVs
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers