Electrolux GA60PLVC Quick start guide

Brand: Electrolux

Model: GA60PLVC

Type: Quick start guide

Electrolux GA60PLVC dishwasher offers a range of programs tailored to your dishwashing needs. Choose from ECO 50°, AutoFlex 45°-70°, FlexiWash 45°-65°, Intensive 70°, 89 Minutes 60°, QuickPlus 60°, GlassCare 45°, Extra Silent 50°, Rinse & Hold, and Machine Care. With options like XtraDry, TimeManager, and Hygiene, you can customize your wash cycle. Utilize the MyFavourite feature to save and quickly access your preferred settings. Delay start lets you set the dishwasher to run when it's convenient for you.

1 2 3 4

6 5

1. On/off button 4. Option key

2. Navigation key (up) 5. OK key

3. Display 6. Navigation key (down)

Programme Degree of soil, type of load

ECO 50°

• Normal soil

• Crockery and cutlery

AutoFlex 45°-70°

• All

• Crockery, cutlery, pots and pans

FlexiWash 45°-65°

• Mixed soil

• Crockery, cutlery, pots and pans

Intensive 70°

• Heavy soil

• Crockery, cutlery, pots and pans

89 Minutes 60°

• Normal soil

• Crockery and cutlery

QuickPlus 60°

• Light soilCrockery and cutlery

GlassCare 45°

• Normal or light soil

• Delicate crockery and glassware

Extra silent 50°

• Normal soil

• Crockery and cutlery

Rinse & Hold

• All

Machine Care

• Self-cleaning

• No load

Brief instructions

OPERATING THE APPLIANCE

Starting programme

1. Press On/off.

2. Select programme from the programme list.

3. Set the applicable options.

4. Fill the detergent container with

proper washing agent.

5. Press OK to conrm and close the door.

How to set an option

1. Press Option.

2. Select an option

(XtraDry, TimeManager, Hygiene).

3. Press OK to conrm.

4. To go back to the programme list, press Option

until the display shows your selection.

How to start the MyFavourite

programme

Press and hold OK for about 3 seconds.

• If no programme has been saved, the setting

MyFavourite is displayed.

How to set and save the

MyFavourite programme

1. Press Option.

2. Select Settings and press OK.

3. Select MyFavourite and press OK.

4. Select programme from the

programme list and press OK.

5. The display shows Add option and Done.

• Select Done if you want to save a programme.

• Select Add if you want to add an option to

MyFavourite list.

6. Press OK to conrm.

How to delay the start of a

programme

1. Select a programme.

2. Press Option. The display shows the option list.

3. Select Delay start and press OK to conrm.

Select the number of hours

desired for delay start.

4. Press OK.

5. Press Option until display shows

the selected programme.

6. Press OK and close the door.

Cancelling a programme or

Delay Start countdown

1. Open the appliance door.

2. Press and hold Option for about 3 seconds until

the display shows: Stop washing?

3. Select Stop and press OK.

End of the programme

When the programme is completed,

the TimeBeam displays 0:00 and CLEAN.

1. Press the on/off button or wait for the

Auto Off function to automatically

deactivate the appliance.

2. Close the water tap.

Opening door during operation

• When you open the door, the running programme

stops.

• When you close the door, the appliance

continues from the point of interruption.

• If the door stays open for longer than 30 seconds

during the drying phase, the running programme

is cancelled.

DAILY USE CARE AND CLEANING

Cleaning lters

Dirty lters decrease washing results.

Presented pictures show how to

disassemble and reassemble the

lters. An incorrect position of the

lters may cause bad washing results

and damage to the appliance.

Internal cleaning

During manual cleaning, clean

the rubber gasket of the door.

Run Machine Care programme

at least once every 2 months

with a descaler or a cleaning

product designed for dishwashers

and without any load.

External cleaning

Clean the appliance with a moist, soft

cloth. Do not use abrasive products,

abrasive cleaning pads or solvents.

1. Press the button. (A)

2. Insert detergent or tablet into

the compartment. (B)

3. If you want to choose a programme

with prewash phase, put a small

quantity of detergent on the inner

part of the appliance door.

4. Close the lid.

1. Open the salt container (turn the cup counterclockwise).

2. Fill the container with dishwasher salt using proprietary

funnel supplied with the appliance.

Add 1 litre of water rst if the dishwasher

will be used for the rst time.

3. Remove the salt around the opening of the salt container.

4. Turn the cap of the container clockwise to close it.

Set the level of water softener according to the water

hardness in your area. From level 1 to level 10.

Filling rinse aid container Setting rinse aid level

Fill the rinse aid container before rst use and when the indicator is clear. (C)

1. Open the lid. (E)

2. Fill the container until marking

reaches MAX. (D)

3. Remove spilled rinse aid.

4. Close the lid.

Set the level of the rinse aid dispenser

according to the necessary quantity of rinse

aid.

Level 0, no rinse aid.

Level 6, maximum amount of rinse aid.

Using the detergent

Do not ll the detergent

container during rst use.

Filling the salt container.

SAFETY INFORMATION TROUBLESHOOTING

Error codes

The appliance does

not ll with water.

• Make sure that the water tap is open.

• Make sure that the pressure of the water

supply is not too low. For this information,

contact your local water authority.

• Make sure that the water tap is not clogged.

• Make sure that the lter in the

inlet hose is not clogged.

• Make sure that the inlet hose

has no kinks or bends.

The appliance does

not drain the water.

• Make sure that the sink spigot is not clogged.

• Make sure that the lter in the

outlet hose is not clogged.

• Make sure that the interior lter

system is not clogged.

• Make sure that the drain hose

has no kinks or bends.

The anti-ood

device is on.

• Close the water tap and contact

an Authorised Service.

Water connection

Make sure not to cause damage to the water hoses.

• Before you connect the appliance to new pipes or pipes not used for a long

time, let the water ow until it is clean.

• The rst time you use the appliance, make sure that there is no leakage.

• The water inlet hose has a safety valve and a sheath with an inner mains

cable.

• Without electrical power, the water protection system is not active. In this

case there is a risk of ooding.

WARNING! Dangerous voltage.

If the water inlet hose is damaged, immediately close the water

tap and disconnect the mains plug from the mains socket. Contact

the Authorised Service Centre to replace the water inlet hose.

117875460-A-202018

Electrolux GA60PLVC Quick start guide

Electrolux GA60PLVC Quick start guide

Electrolux GA60PLVC Quick start guide

Related papers

Other documents