Page is loading ...
KRTGR6816 EN
Copyright © 2018 VARO P a g e | 1 www.varo.com
TROLLEY PRESSURE SPRAYER 16L
KRTGR6816
1 APPLICATION
This pressure sprayer is intended for distributing most garden herbicides and fungicides and
sprays to control most pests and diseases on most plants, trees and shrubs.
It is not designed for professional and agricultural use.
When using substances as specified, appropriate personal protective equipment is to be used.
WARNING! For your own safety, read this manual and the general safety
instructions carefully before using the appliance.
2 DESCRIPTION (FIG. A)
1. switch
2. Handle
3. pumping handle
4. spray rod
5. spray head
6. relief valve
7. compartment
8. funnel
9. Handle fastening nut
10. Inflator
11. tank
12. wheel
3 PACKAGE CONTENT LIST
▪ Remove all packaging materials.
▪ Remove remaining packaging and packing inserts (if included).
▪ Check that the package contents are complete.
▪ Check the appliance and all accessories for transportation damage.
▪ Keep the packing materials as long as possible till the end of the warranty period. Dispose
it into your local waste disposal system afterwards.
WARNING: Packaging materials are not toys! Children must not play with
plastic bags! There is a danger of suffocation!
1pc trolley pressure sprayer 16L
If any parts are missing or damaged, please contact your dealer.
4 PRIMARY FUNCTIONS
The Sprayer is a trailing compressed type sprayer developed by us to be unique and beautiful
in shape, simple to operate, and uniform in atomization. The height of its handle is adjustable.
This Sprayer is applicable for pest-controlling of various crops, flowers and garden plants，
cleaning of public places as well as hygiene and disease control of fowl and livestock houses
KRTGR6816 EN
Copyright © 2018 VARO P a g e | 2 www.varo.com
5 STRUCTURE, OPERATING PRINCIPLES AND FEATURES
5.1 STRUCTURE
This Sprayer comes with five units: a tank unit (wheels, a tank, a funnel), an air pump(an
inflator, a handle, a piston etc.), a spraying unit (a tube, a switch, a spray rod, and a spray
head), relief valve, and drag handle unit (a compartment, a handle and fastening nuts ).
5.2 PRINCIPLE
The pumping handle moves up/down to produce a pressure difference between the inside and
outside of the tank which will drive the chemical into the tube and spray rod to enable fog
spraying .
5.3 Features
▪ Elegant appearance, simple structure, easy operation and free of leakage.
▪ The height of drag handle is adjustable.
▪ comes with a pressing switch to allow flexible and sound operation.
▪ Comes with wheel moving system to relieve the operator from back-mounting and reduce
the labor.
▪ Made of high-quality materials to ensure acid, base and corrosion resistance, contributing
to extended service life.
6 MAINTENANCE
▪ After use empty out all and any spray left over and wash out the entire tank at least 3
times with clean water filling a fourth time and pressurising the tank and pumping the
clean water out through the spray line hose and lance and nozzles. This must be done to
prevent sludge forming in the remaining spray residue and blocking the spray line and so
that the sprayer is clean for its next use.
▪ Store in a clean dry place out of the direct sunlight.
/
