AAXA Technologies P700 Pro Projector User manual

aaxa

TECHNOLOGIES

User Guide

Caution!

WARNING: Please use this product as instructed. Misuse may cause

injury or death.

DO NOT use while driving.

DO NOT expose to water or wet

surfaces. Electric shock may occur.

DO NOT expose the projected LED

image to your eyes or the eyes of

others.

DO NOT block or restrict airow

from ventilation holes as this may

cause the projector to overheat.

Keep the projector and

charger away from any heat sources.

Caution for Headphone Use

• Prolonged use at high volume may

impair your hearing.

• High volume during walking or driving

may cause distractions and result in

injury or death.

Table of Contents

Chapter 1: P700 Pro at a Glance

P700 Pro Introduction

Remote & Keypad

Accessories

Chapter 2: Getting Started

Focus Adjustment / Throw Distance

External Inputs/Outputs

Navigating the Main Menu

Connecting to a Computer HDMI

Playing 3D Through HDMI

Connecting to a Computer VGA

Connecting to Composite Video

Loading External Content

Video Player Menu

Playing 3D Videos

Viewing Pictures

Viewing 3D Pictures

Viewing Productivity Docs

Smartphone Mirroring

Connecting to Wi-Fi

Streaming Applications

Connecting to Bluetooth

Chapter 3: Settings Menu

Application Manager

Bluetooth & Networks

System Settings

System Update & Language

Projector Settings

About

Other Applications

Keystone

Chapter 4: Technical Details

Troubleshooting

Specications

Notes

1

2

3

4

5

6

7

9

12

13

15

17

20

24

27

31

32

37

40

42

44

47

48

49

50

51

52

53

54

55

57

59

60

P700 Pro at a Glance

Chapter 1

Power Switch

Micro SD Card Slot

HDMI Port

USB Port

Main Unit Front/Back

VGA Port

Power Button

Focus Adjustment

AV Port

Headphone Out

Power Port

Power On/Off

1

Remote & Keypad

2

NOTICE: Pressing power on the remote will only put the projector in STANDBY mode.

Toggle the “ON/OFF” switch on the side of the projector to fully turn the projector

off.

Power On/Off

Select Source

Input Exit/Back

Direction Pad

Both the keypad and remote can be used to navigate through the menus. The Main Menu

Navigation on the remote functions exactly the same as the directional pad on the P700 Pro

unit. The remote control has additional functions inaccessible by the onboard keypad.

On / Off

LED Lights

OK

Main Menu

Navigation

Keystone +

Main Menu

Keystone -

Volume Up

Volume Down

Remote

Enable 3D

Back

Mute

Accessories

3

*Under various circumstances, the actual accessories may be different from

those shown in the pictures above.

Additional accessories are available for purchase at www.aaxatech.com

Tripod

Remote

Power Adapter

VGA Cable

A/V Cable

Getting Started

1. Connect the power cord to the P700 Pro.

2. Connect the other end of the power cord into the wall power source.

3. Toggle the On / Off switch on the side of the projector to the “ON” position --the

projector should automatically turn on.

4. If the projector does not automatically turn on with the “Power Switch” toggled to the

“ON” position, press the “ON/OFF POWER” button on the keypad and hold for

2-3 seconds to start the projector.

4

Powering ON the projector

Chapter 2

Powering OFF the projector

Standby Mode

1. To transition to “STANDBY” mode, press the power button twice on the keypad or

the remote control.

2. The optical engine should power off and the fan should stop spinning. The projector

is now in “STANDBY” mode and can be turned on using the remote control.

*Note: Standby mode will still consume a small amount of power.

1. To turn off the projector, toggle the “Power Switch” to the “OFF” position. This will

fully turn off the projector.

Focus Adjustment / Throw Distance

5

DIAGONAL SCREEN SIZE

16:9 Aspect Ratio

Throw Distance

Units: Inches

20

30

40

50

60

70

80

90

Diagonal Size

Units: Inches

19

29

38

48

57

67

76

86

• Spin the focus wheel up or down until the image becomes

clear.

Focus Adjustment

Throw Distance Chart

Throw Ratio 1.2

Projection Angle: 100% Offset

*minimum throw distance: 20 inches

6

External Inputs and Outputs

Navigating the Main Menu

7

Main Menu

The Main Menu allows access to all the features of the P700 Pro.

Note: While the Keypad and Remote Control are usable to access the basic features of

the P700 Pro, it is recommended to use a mouse, either USB or Bluetooth.

Main Menu Features

• Streaming - Stream movies or videos from YouTube, Netix, Vevo, and more

• Playback - View les from external devices such as microSD card and USB

• Productivity - Brings up E-mail Client, Ofce Viewer, Calculator, Calendar, Gallery,

and Smartphone Mirroring

• Settings - Brings up Application Manager, Network Settings, Bluetooth Settings,

Language Settings, System Update and Projector Settings

• HDMI - Brings up connec-

tion via HDMI

• PC-VGA - Brings up con-

nection via VGA

• Video-RCA - Brings up con-

nection via A/V

• Browser - Brings up inter-

net browser

Inputs & Browser

Navigating the Main Menu Cont.

8

Pop-Up Menu:

The Pop-Up Menu may be accessed with a mouse by clicking the “up” arrow at the bottom of

the screen and may be closed by clicking the “down” arrow.

The Pop-Up Menu allows the user to access Main Menu, Open Applications, Adjust Volume

and 3D Capabilities.

“UP” arrow to bring up Pop-Up Menu Pop-Up Menu

Connecting to a Computer via HDMI

9

Connect one end of the HDMI Cable

to your computer’s HDMI port.

Step 1:

Step 2:

Step 3:

In the Main Menu, select the “Inputs” icon and then the “HDMI”.

Connect the other end of the HDMI

Cable to your P700 Pro’s HDMI port.

Select “HDMI” icon

Connecting to a Computer Cont.

Step 4:

Enabling HDMI output on your Computer – To enable HDMI output on your computer most comput-

ers require “turning on” the video output feature. Each computer is different. Please consult your

owner’s manual for instructions to enable HDMI output. Below are standard instructions for a

Windows 10 computer – not all systems are the same.

Press Windows+P to toggle

through display settings. Select

either “Duplicate” or “Extend” de-

pending on your viewing option.

*NOTE: different operating sys-

tems may differ

Step 5:

1. Right click on computer

desktop and select “Screen

Resolution”

2. Display Properties window

will pop up and select the

Advance Display Settings

3. Please make sure the

Multiple displays has the “Du-

plicate these displays” option

selected and the Resolution

is 1920 x 1080 or below as

pictured in the red box.

4. If the image is blurry or the

text is not legible, adjust the

screen resolution.

Step 6:

10

Connecting to HDMI Video Source

Connectivity to Multimedia Devices

The P700 Pro can connect to many media

devices including: iPod, iPhone, iPad, DVD

players, smart phones, cameras, video game

consoles and other peripherals with ease.

*Some smart phones require video out capabilities to be displayed with the P700 Pro. Check with your phone manufacturer.

11

Step 1:

In the Main Menu

Turn on your multimedia device.

The projector should automatically detect a Blu-Ray

player or HDMI video source as 1920x1080p reso-

lution. This resolution includes “overscan” which

means that the edges of the display will be cutoff.

You may adjust accordingly to your devices best

output resolution.

Select “HDMI” icon

Step 2:

Resolution

1920x1080

1366x768

1360x768

1280x768

1280x720

1024x600

1024*768

800x600

Overscan

X

* Overscan Table

Playing 3D through HDMI Video

To Enable 3D mode there are two options:

(1) Press the “3D” button on the remote control.

(2) Pull up the Projector control menu by clicking on the “up” arrow on the bottom of

the screen (requires mouse). Then click the 3D button and select the 3D content.

12

Step 1:

In the Main Menu

Step 2:

Select “HDMI” option

3D Video can be played through the 3D compliant HDMI port. First con-

nect your 3D output device (for example Blu-Ray player) to the projector.

3D Menu

11

Step 1:

Step 2:

Connecting to a Computer via VGA

13

Connect one end of the VGA Cable

to your computer’s VGA Port.

Step 1:

Step 2:

Step 3:

In the Main Menu Select the “PC-VGA” Icon.

Connect the other end of the VGA

Cable to your P700 Pro’s VGA port.

Select “VGA” icon

Connecting to a Computer Cont.

Step 4:

Enabling VGA output on your Computer – To enable VGA output on your computer most com-

puters require “turning on” the video output feature. Each computer is different. Please consult

your owner’s manual for instructions to enable VGA output. Below are standard instructions for a

Windows 10 computer – not all systems are the same.

Press Windows+P to toggle

through display settings. Select

either “Duplicate” or “Extend” de-

pending on your viewing option.

*NOTE: different operating sys-

tems may differ

Step 5:

14

1. Right click on computer

desktop and select “Screen

Resolution”

2. Display Properties window

will pop up and select the

Advance Display Settings

3. Please make sure the

Multiple displays has the “Du-

plicate these displays” option

selected and the Resolution

is 1920 x 1080 or below as

pictured in the red box.

4. If the image is blurry or the

text is not legible, adjust the

screen resolution.

Step 6:

Connecting to Composite Video

15

Connect the 3.5mm Composite A/V

Cable to the back of the P700 Pro.

Connect the composite end of

the AV Cable (Red, White,Yellow)

to your own male AV cable.

Step 1:

Step 2:

Connecting to Composite Video Cont.

*Some smartphones require video out capabilities to be displayed with the P700 Pro.

Check with your phone manufacturer for details.

16

In the Main Menu

Turn on your multimedia device.

Select “Video-RCA” Icon

Step 3:

Step 4:

Loading External Content

17

The P700 Pro can read les

directly from both a Micro SD

Card and USB Drive.

Supported le types include:

MP3 / WMA / OGG / WAV / JPG

AVI / MKV / BMP / GIF / XLS

PPT / DOC / PDF / TXT

(up to 32 GB)

Page is loading ...

AAXA Technologies P700 Pro Projector User manual

This manual is also suitable for

AAXA Technologies P700 Pro Projector User manual

Related papers

Other documents