![](//vs1.manuzoid.com/store/data-gzf/c3ed14135a7d5a1349fd6e57d51d4bcb/2/001114625.htmlex.zip/bg14.jpg)
20
Ø Topping up washing
When the programme has started, washing can be reloaded
or taken out as required.
Select Inicio/Pausa+Carga A (Start/Reload).
²
– If there is a high water level, high temperature or if the drum
is rotating, the washing machine door remains locked for
reasons of safety and reload is not possible. Follow the
information on the display panel. To continue the programme,
select the Inicio/Pausa+Carga A (Start/Reload) button. The
washing machine door is locked and the programme
continues automatically.
– Load display is not active during relosding.
– Do not leave washing machine door open for a prolonged
period – water could run out of the washing.
Ø Changing the programme sequence
if you have mistakenly started a wrong programme:
1. Select Inicio/Pausa+Carga A (Start/Reload).
2. Select another programme.
3. Select Inicio/Pausa+Carga A (Start/Reload). The new
programme starts from the beginning.
Ø Cancelling the programme
For programmes at high temperature:
1. Select Inicio/Pausa+Carga A (Start/Reload).
2. Cool down washing: select Rinse/Freshen Up
(see programas adic. (Additonal programmes).
3. Select Inicio/Pausa+Carga A (Start/Reload).
For programmes at low temperature:
1. Select Inicio/Pausa+Carga A (Start/Reload).
2. Select Spin or Drain.
(see programas adic. (Additional programmes)
3. Select Inicio/Pausa+Carga A (Start/Reload).
×× ˜
60°C
1400
0
2:31h
Reload: Reload is possible
ÖÖ