Ohlins KA647 Mounting Instruction

Ohlins
Brand
Ohlins
Model
KA647
Type
Mounting Instruction

Ohlins KA647 is a high-performance shock absorber designed for the Kawasaki GPZ 1000 RX motorcycle. It features a 67mm stroke, 15mm of preload adjustment, and 309mm of total length. The KA647 is designed to improve the handling and performance of the GPZ 1000 RX, providing a more comfortable and controlled ride. It is also fully adjustable, allowing riders to fine-tune the suspension to their individual riding style and preferences.

Ohlins KA647 is a high-performance shock absorber designed for the Kawasaki GPZ 1000 RX motorcycle. It features a 67mm stroke, 15mm of preload adjustment, and 309mm of total length. The KA647 is designed to improve the handling and performance of the GPZ 1000 RX, providing a more comfortable and controlled ride. It is also fully adjustable, allowing riders to fine-tune the suspension to their individual riding style and preferences.

MOUNTING INSTRUCTION
Brand
KAWASAKI
Model
GPZ 1000 RX
Year
1986-87
Art. No.
KA 647
Total length
309
mm
Stroke
67
mm
Reb.click
15
Comp.click
Preload
15
mm
Supplementary parts
192-01
231-01
1180-01
Sticker / Dekal (2x)
Ty-rap / Buntband (2x)
Memo sticker / Memodekal
Owners manual / Bruksanvisning
Mounting instructions
1.
Ställ MC:n på centralstödet, demontera sadel och
sidokåpor.
2.
Plocka bort batteriet och demontera batterilådan.
3.
Demontera den tvärgående plåtbryggan samt
justeringsanordningen för originaldämparen.
4.
Lossa och demontera stötdämparbultarna samt övre
länkinfästningen. Demontera stötdämparen med
justeranordning.
5.
Den nya Öhlin-dämparen kan nu monteras. Börja
med att föra upp justercylindern och vidare ut på
höger sida. Följ efter med stötdämparen och montera
stötdämparbultarna, samt bulten till den övre
länkinfästningen.
6.
Montera justercylindern med bifogat fäste (se skiss)
tillsammans med den tvärgående plåtbryggan.
7.
Montera batterilådan, tillhörande elarrangemang,
sidokåpor och sadel.
8.
Se till att alla skruvar är åtdragna.
1.
Put the motorcycle on the center stand, remove the
seat and side covers.
2.
Remove the battery and the batterybox.
3.
Remove the transverse bracket and the adjusting unit
on the right side. Loosen and remove the shockbolts
and the upper linkage bolt.
4.
Remove the original shockabsorber with the
adjusting unit.
5.
The new Öhlin-shock can now be mounted. Start by
pulling the hydraulic spring adjuster up, and out on
the right side, and then the shockaborber itself
upwards. Mount the shockbolts and the upper
linkage bolt.
6.
Mount the transverse bracket and the spring adjuster
with bracket (see fig.).
7.
Mount the battery box and the battery, side covers
and the seat.
8.
Make sure that all bolts are tightened.
Öhlins Racin
g
AB frånsä
g
er si
g
allt ansvar för
skada på stötdämpare, motorc
y
kel eller person om
inte monterin
g
s- och skötsel instruktionerna har
föl
j
ts till fullo. In
g
en
g
aranti kan
g
es på funktion
eller livslängd om dessa instruktioner inte följts
Öhlins Racin
g
AB can not be responsible for an
y
dama
g
e to shock absorber, motorc
y
cle or person if
the mountin
g
- and maintainin
g
instructions are not
followed exactl
y
. Also no
g
uarantee can be
g
iven
for the performance and reliabilit
y
if these
instructions are not followed.
  • Page 1 1
  • Page 2 2

Ohlins KA647 Mounting Instruction

Ohlins
Brand
Ohlins
Model
KA647
Type
Mounting Instruction

Ohlins KA647 is a high-performance shock absorber designed for the Kawasaki GPZ 1000 RX motorcycle. It features a 67mm stroke, 15mm of preload adjustment, and 309mm of total length. The KA647 is designed to improve the handling and performance of the GPZ 1000 RX, providing a more comfortable and controlled ride. It is also fully adjustable, allowing riders to fine-tune the suspension to their individual riding style and preferences.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents