X-BULL X-BULL 13000 LBS Synthetic Rope Electric Winch User manual

X-BULL 13000 LBS Synthetic Rope Electric Winch
Brand
X-BULL
Model
X-BULL 13000 LBS Synthetic Rope Electric Winch
Type
User manual

This manual is also suitable for

X-BULL X-BULL 13000 LBS Synthetic Rope Electric Winch is a powerful tool designed to tackle demanding tasks. With its impressive 13,000 lb pulling capacity, it's capable of handling heavy-duty jobs like pulling vehicles out of mud, snow, or other challenging situations. The synthetic rope provides superior strength and durability compared to traditional steel cables, making it less prone to fraying or breaking. This winch is also equipped with a reliable motor that delivers consistent power, ensuring smooth and efficient operation.

X-BULL X-BULL 13000 LBS Synthetic Rope Electric Winch is a powerful tool designed to tackle demanding tasks. With its impressive 13,000 lb pulling capacity, it's capable of handling heavy-duty jobs like pulling vehicles out of mud, snow, or other challenging situations. The synthetic rope provides superior strength and durability compared to traditional steel cables, making it less prone to fraying or breaking. This winch is also equipped with a reliable motor that delivers consistent power, ensuring smooth and efficient operation.

Installation Instructions
13000/10000lb. Winches
Electrical Connection
Pay close attention to proper electrical cable connection as follows (Refer to diagram
1)
1. Short red cable connecting to the red terminal of the motor.
2. Short black cable with yellow jacket connecting to the yellow terminal of the
motor.
3. Short black cable with black jacket connecting to the black terminal of the motor.
The thin black cable connecting to bottom terminal of the motor
4. Long black cable (1.8m), one terminal connecting to the bottom terminal of the
motor, and the other terminal negative (-) connecting to negative (-) terminal of
battery.
5. Long red cable positive (+) connecting to positive (+) terminal of battery.
1. Long black cable (1.8m), one
terminal connecting to the bottom
terminal of the motor, and the other
terminal negative (-) connecting to
negative (-) terminal of battery.
2. Long red cable positive (+)
connecting to positive (+) terminal
of battery.
Installation Instructions
13000/10000lb. Winches
Note:The attachment of the Motor Cables determines the direction of the Pendant Controller’s
button. After the unit is mounted and powered, check the direction of the Power In and Power
Out on the Pendant Controller button. If you wish to change the direction on the Pendant
Controller, disconnect the Battery Cables from the battery, switch the Motor Cable connections
on the Motor Assembly, then reconnect the Battery Cables.
Installing the control box
It is recommended to install you winch control box prior to installing your winch.
You may install the control box in a separate location using 3-4 AWG marine cable (not
included)
Determine if you want your control box located over the motor (side) or the drum (Center)
When the winch is used, the force of the rope on the outermost ring of the winch is the smallest.
When the rope is gradually released, the force of the rope is the largest. When the winch line
appears red (the maximum length of the rope can be placed), the force of the rope is the
largest.
When the winch is not used in a straight and horizontal state, the tension of the winch will be
reduced, the winch is not recommended when the crane is used, that is, upside down.
About the winch noise
The first point is that the winch factory should conduct a noise test before leaving the winch
factory.The noise test has a range.The difference in winch components leads to a difference in
winch sound, but it is definitely within this range.And for further accuracy, the winch factory will
be stricter on the decibel of noise, the standard is 1 meter range of 90db.
Second, the noise is mainly caused by gear friction. In addition to the normal noise, if there is
abnormal sound, it may be due to the running in between the gears, part of the gear
anastomosis is not enough.
About the winch rope
When the rope direction is not correct, the rope will be accumulated in a certain position of the
drum, so that the rope stuck or locked, this time the winch motor turns, but the drum does not
turn, this contradiction in the winch will appear overload damage.
  • Page 1 1
  • Page 2 2

X-BULL X-BULL 13000 LBS Synthetic Rope Electric Winch User manual

X-BULL 13000 LBS Synthetic Rope Electric Winch
Brand
X-BULL
Model
X-BULL 13000 LBS Synthetic Rope Electric Winch
Type
User manual
This manual is also suitable for

X-BULL X-BULL 13000 LBS Synthetic Rope Electric Winch is a powerful tool designed to tackle demanding tasks. With its impressive 13,000 lb pulling capacity, it's capable of handling heavy-duty jobs like pulling vehicles out of mud, snow, or other challenging situations. The synthetic rope provides superior strength and durability compared to traditional steel cables, making it less prone to fraying or breaking. This winch is also equipped with a reliable motor that delivers consistent power, ensuring smooth and efficient operation.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents