CSM SI 0201 Operating instructions

SI 0201
Brand
CSM
Model
SI 0201
Type
Operating instructions

CSM SI 0201 is a versatile measurement device designed for various applications. With its ability to measure voltage, current, power, and energy, it provides comprehensive electrical parameter monitoring. It features high accuracy and a wide measurement range, making it suitable for use in diverse electrical systems. Additionally, it offers data logging capabilities, allowing for the recording and analysis of historical data. The compact size and ease of installation make it a convenient solution for various electrical applications.

CSM SI 0201 is a versatile measurement device designed for various applications. With its ability to measure voltage, current, power, and energy, it provides comprehensive electrical parameter monitoring. It features high accuracy and a wide measurement range, making it suitable for use in diverse electrical systems. Additionally, it offers data logging capabilities, allowing for the recording and analysis of historical data. The compact size and ease of installation make it a convenient solution for various electrical applications.

Safety Instructions
MiniModules
General Safety Instructions
Please observe the following safety instructions and information provided with the MiniModule as well as the
safety-specific information in the accompanying technical documentation.
WARNING!
MiniModules without high-voltage designation are designed for measurements with on-board power
supply systems with 12 V, 24 V and 48 V. Improper use may result in life-threatening electrical shocks.
)Make sure that these modules are only handled by qualified and trained personnel.
)Never connect a MiniModule without high-voltage designation directly to a system with
higher operating voltages (> 60 V DC), e.g. high-voltage batteries.
)Observe safety instructions.
NOTE!
Improper opening of the housing will impair the operational safety and function of a MiniModule.
)Do not open the module housing.
)Do not carry out any mechanical or electrical modifications on a MiniModule.
fMake sure that MiniModules are only handled by qualified and trained personnel.
fMake sure that MiniModules are only operated within the specified operating temperature range and at a
relative humidity between 5 % and 95 % (non-condensing).
fIn wet environments (pollution degree 4) supply voltage must not exceed 35 V DC. In dry environments the
maximum permitted supply voltage is 50 V DC (+10 %) 1.
fOnly use sensor cables and cables for CAN and power supply which meet the corresponding requirements.
fTo ensure the measurement accuracy of a MiniModule, annual calibration is recommended.
Before Putting MiniModules into Operation
fCarefully read the entire documentation delivered with a MiniModule before initial operation. Please contact
CSMGmbH with any additional questions.
1 ADMM 8 pro2: 45 V (+10 %)
CSM GmbH
Computer-Systeme-Messtechnik
CSM GmbH Germany is certified.
Copyright © 2022 CSM Computer-Systeme-Messtechnik GmbH
MiniModules_SI_0201_ENG 2022-12-13
CSM GmbH
Computer-Systeme-Messtechnik
Raieisenstraße 36 • 70794 Filderstadt • Germany
Phone: +49 711 - 7 79 64-20 • Fax: +49 711 - 7 79 64-40
info@csm.de • www.csm.de
All trademarks mentioned are property of their respective owners.
This document is subject to change without notice.
Page 2/2
  • Page 1 1
  • Page 2 2

CSM SI 0201 Operating instructions

SI 0201
Brand
CSM
Model
SI 0201
Type
Operating instructions

CSM SI 0201 is a versatile measurement device designed for various applications. With its ability to measure voltage, current, power, and energy, it provides comprehensive electrical parameter monitoring. It features high accuracy and a wide measurement range, making it suitable for use in diverse electrical systems. Additionally, it offers data logging capabilities, allowing for the recording and analysis of historical data. The compact size and ease of installation make it a convenient solution for various electrical applications.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents