JBL SRX910LA Loudspeakers User manual

SRX910LA | Spare Parts

TRANSDUCERS

PART NUMBER TYPE DESCRIPTION

5122183-00X HF Driver 2432H-3, 1.5 in exit compression driver with 3 in voice coil, 8 ohms, complete driver

D8R2432 Diaphragm Kit Replacement diaphragm kit for the 2432H-3 compression driver

5120067-00X LF Woofer 261G-1, 10 in diameter, dual 2.0 in diameter voice coil, 4 ohms complete woofer

5136328-00 Recone Kit Recone kit for the 261G-1 woofer

RIGGING

OTHER

INTRODUCTION

This document is a quick reference guide for the most commonly needed SRX910LA spare parts. For the complete list of parts, as-

sembly drawings, and torque values, refer to the SRX910LA SBOM (Service Bill of Materials), available for download from the JBL

Professional Service Portal.

PART NUMBER TYPE DESCRIPTION

5139073-00 Rear Rigging Complete rear rigging assembly, includes label

5123832-00 Front Rigging Front rigging bar, right or left side

5128300-00 Quick Release Pin Pin, 8 mm diameter, 16 mm long, includes lanyard and base

PART NUMBER TYPE DESCRIPTION

5140078-00 Grille Complete grille, includes (1) JBL logo

5056661 Logo JBL logo, 39 mm x 32 mm

5123053-00 Ampliﬁer Complete SRX900LA ampliﬁer module, full range

5047669 Knob Round knob for SRX900 ampliﬁer module