i3 International HE01ERK User manual

Brand: i3 International

Model: HE01ERK

Category: AV extenders

Type: User manual

i3 International HE01ERK is an HDMI extender that allows you to transmit HDMI video signals up to 130 feet (40 meters) over a single Cat5e/6 cable. It supports resolutions up to 1920x1200 and 1920x1080 at 60Hz, making it suitable for a wide range of applications, including digital signage, home theater, and presentations. The HE01ERK is easy to install and does not require any external power, making it a convenient and cost-effective solution for extending HDMI signals over long distances.

Thank you for purchasing i3 International’s HE01ERK HDMI Cat5e/6 extender (sold in pairs). Use HE01ERK to carry HDMI video signal

for distances of up to 130 ft (40 m) at 1080p resolution (1920x1080) using a Cat5e/6 RJ45 Ethernet Cable.

Use with i3’s dDisplay license for convenient PVM monitor installations.

INSTALLATION

HDMI CAT5e/6 Extender HE01ERK

User Manual

i3-TRNG-ACCESSORIES-HE01ERK.indd

Rev. 220913

FEATURES

• HDMI signal (1920x1080 / 1920x1200) extension up to

130 ft (40 m) over RJ45 Cat5e/6 cable.

• No external power required

• Built-in micro USB port for optional power supply

• Use with i3’s NVRs for convenient PVM installation.

PACKAGE CONTENTS

1. HE01SET (Transmitter) x1

2. HE01SER (Receiver) x1

3. Micro USB to DC plug cable x1

Connect 5V power adapter (not included) using the Micro USB to

DC cable (provided) to HE01SET where HDMI sources does not

provide enough power to HE01SER.

i3 NVR

HE01SET

(Transmitter)

i3 INTERNATIONAL INC. 1.866.840.0004

www.i3international.com

REGULATORY NOTICES (FCC CLASS A)

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including

interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the

limits of a Class A digital device, pursuant to Part 15 of the FCC rules.

These limits are designed to provide reasonable protection against

harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with

the instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area

is likely to cause harmful interference in which case the user will be

required to correct the interference at his own expense.

130 ft 40 m

PVM Monitor

CONNECTORS

Figure 2. HE01ERK panels,

parts description.

RJ45 straight connection

Figure 1. HE01ERK connection diagram.

dDisplay Monitor #1

HDMI

1. Micro USB connector (HE01SET Transmitter only). Connect

Micro USB to DC cable (provided) where HDMI source does

not provide enough power to Receiver.

Note: 5V power adapter not provided.

2. HDMI connector. Connect HE01SET to on-board HDMI

connector on an i3 NVR, connect HE01SER to the HDMI

monitor.

3. Power LED Indication. Indicates device power status.

See Table 1.

4. RJ45 Connector. Use the straight CAT5e/6 cable, to connect

the HE01ERK devices. See Tables 2, 3.

IMPORTANT

• Using high quality CAT5e/6 UTP cable for all transmission

ranges over 98 ft (30 m).

• Do not use STP or flat cable to avoid video loss

• Keep the cabling away from electromagnetic waves, i.e.:

microwaves, radio equipment, high voltage power lines, etc.

• Maximum supported distances will vary based on the

equipment.

• Do not coil the cable to avoid crosstalk interference.

• HDCP is not supported.

• This is not a networking product, do not connect with any

Ethernet device.

Figure 3. HE01ERK front and back panels

HE01SER

(Receiver)

i3-TRNG-ACCESSORIES-HE01ERK.indd

SPECIFICATION

HE01SET HE01SER

Video Bandwidth 2.25 Gbps (HDMI 1.3)

Supported

Resolutions

1920 x 1200 @ 60Hz

1920 x 1080 @ 60Hz

1680 x 1050 @ 60Hz

1600 x 1200 @ 60Hz

1600 x 900 @ 60Hz

1440 x 900 @ 60Hz

1280 x 1024 @ 60Hz

1280 x 960 @ 60Hz

1280 x 800 @ 60Hz

1280 x 720 @ 60Hz

1024 x 768 @ 60Hz

800 x 600 @ 60Hz

Input TMDS Video

Signal 1.2 Vp-p

Input DDC Signal 5 Vp-p (TTL)

Transmission

Distance 130 ft (40 m) @ 1920 x 1200 | 1920 x 1080

230 ft (70 m) @ 1280 x 720 | 1024 x 768

Ports & Interfaces

HDMI Connector HDMI Type A

Link Connector RJ45 x1

Power

Power Connector Micro USB x1 N/A

Power Supply 5V 1Amp (Optional)

Environmental speciﬁcations

Operation 14-149 °F (-10-65 °C);

Storage -4-185 °F (-20-85 °C);

Humidity ≤ 85%

Physical Characteristics

Dimensions 2¼” x 15/16” x ¾” (57.5 x 24 x 20.2 mm)

Weight 0.044 lbs (20 g)

i3 INTERNATIONAL INC. 1.866.840.0004

www.i3international.com

HE01ERK. HDMI CAT5e/6 Extender

QUICK START GUIDE

PIN Color TMDS

1 White Orange TMDS DATA2 +

2 Orange TMDS DATA2 -

3 White Green TMDS CLOCK + / HDMI 5V

4 Blue TMDS DATA1 +

5 White Blue TMDS DATA1 -

6 Green TMDS CLOCK / GND

7 White Brown TMDS DATA0 +

8 Brown TMDS DATA0 -

Table 2. RJ45 CAT5e/6 Pin Layout. TIA/EIA-568-B

RJ45 PIN LAYOUT

Resolution Cat5e/6 Distance

1920 x 1200 130 ft (40 m)

1920 x 1080 130 ft (40 m)

1280 x 1024 197 ft (60 m)

1280 x 720 230 ft (70 m)

1024 x 768 230 ft (70 m)

TRANSMISSION DISTANCE

Green ON Green OFF

Power ON Power OFF

POWER STATUS

Table 1. Power Status LED

Table 3. Cat5e/6 transmission distance based on the resolution.

ACT Download &

Documentation

Scan this QR code or visit ftp.i3international.com for

Annexxus Configuration Tool (ACT) installation and

additional documentation.

Contact our Technical Support team at: 1.877.877.7241

or [email protected] if you have any

questions or concerns regarding camera installation or if

you require software services or support.

i3 International HE01ERK User manual

Brand: i3 International

Model: HE01ERK

Category: AV extenders

Type: User manual

Download PDF

report

i3 International HE01ERK User manual

i3 International HE01ERK User manual

Other documents