FEATURES:
• 2CH smart line-output converter
• 2CH high level input 2CH RCA output
• Surface mount component technology
• Lowest impedance and best power filter
• FR4 double sides PC board
• Remote trigger output with signal sensing
• Power LED indicator to show working status
• Speaker emulator to enable signal output from
some OEM amplifiers with speaker sensor
SPECIFICATIONS:
Input: Up to 55W
Output: Up to 8V
Remote Output Generate: 12 Volt
Frequency Response: 10Hz-30KHz
Input Impedance: 20K ohm
Standby Current: 200mA
Dimensions: 65.8mm L x 57mm W x 24.2mm H
2.58” x 2.24” x 0.95”
Smart Line Output Conversion with Speaker Emulator
V2HL.V2 V2HL.V2
V2HL.V2
V2HL.V2
Smart Line Output Conversion
with Speaker Emulator
2 Channels
SPEAKER
OUTPUT
RADIO
INSTALLATION
AMPLIFIER
INPUT
RCA
REMOTE OUT
GROUND
REM OUT
GND
R- R+ L- L+
Power LED indicator to
show working status
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Roland VC-100UHD Reference guide
-
Toshiba TLCS-900 Family User manual
-
Fujitsu Semiconductor User manual
-
Rockville Phenom RXA-T1 Owner's manual
-
B.M.C. Pure Dac Owner's manual
-
Rotel RSX-1057 User manual
-
CYP XA-HDCP User manual
-
Lindy HDMI 2.0 EDID Emulator, HDCP 2.2 User manual
-
-
Behringer ACX1000 User manual
